West Elm Classic Rolling File Cabinet Assembly Instruction

classic mobile  le cabinet
assembly instructions
! Tools required:
! Do not throw away packaging materials until assembly is complete.
! Assemble this item on a soft surface, such as cardboard or carpet, to protect  nish.
AB
C
locking caster 2x
D
short  le bar 2x
E
long  le bar 2x
Page 1 of 25584412/5584446/5584289/5584438 - 03.03.08
classic mobile  le cabinet
assembly instructions
1. Fasten casters to the base of the cabinet in position as shown. Locate the two locking casters (C) at the front corners. Locate the three non-locking casters (A) at the back corners and front center. Fasten using screws (B) and tighten with a phillips screwdriver.
C
A
C
A
A
C
2. Slide long  le bar (E) into notch in drawer side with notches in bar facing upward. Next slide short  le bar (D) into notches in long  le bar as the drawing shows.
D
E
B
CARE INSTRUCTIONS
Hardware may loosen over time. Periodically check that all connections are tight. Wipe with a soft, dry cloth. To protect  nish, avoid the use of chemicals and household cleaners.
Page 2 of 25584412/5584446/5584289/5584438 - 03.03.08
Loading...