West Elm Ceramic Circle Table Lamp Assembly Instruction

ceramic circle table lamp

Important Safety Instructions:

·For safety purposes, this lamp is equipped with a polarized plug (one blade is wider than the other). If the
plug does not fit securely into your outlet, do not force it-contact a professional electrician. Use the plug with
an extension cord only if it can be fully inserted into the cord's socket. Never alter the plug in any way.

·This instruction is provided for your safety. It is important that they are read carefully and completely before
assembling fixture.

·This fixture has been rated for up to (1) 100-watt TYPE A standard bulb (not included). To avoid the risk
of fire, do not exceed the recommended wattage.

Warning:

·To reduce the risk of fire, electrical shock or personal injury, always turn off
and unplug lamp and allow it to cool prior to replacing light bulb.

·Do not touch bulb when fixture is turned on. Do not look directly at lit bulb.

·Keep flammable materials away from lit bulb.

Pre-assembly:

·Remove all parts and hardware from box along with any plastic protective packaging.

·Do not discard any contents until after assembly is complete to avoid accidentally discarding small parts or
hardware.

assembly instructions

Parts enclosed:
(1) Finial (A)
(1) Harp Top (B)
(1) Harp (C)
(2) Harp Caps (D)
(1) Socket (E)
(1) Saddle (F)
(1) Shade(J)

D

Assembly Instructions:

1.Insert the harp (C) into the Saddle (F), and lower the two
Harp caps (D) until they cover the two-pronged saddle.

2.Unscrew the nial (A) from the harp top (B). Place shade (J) over the assembled
harp, making sure the top extends through the hole at the top of the shade.

3. Attach the nial (A) and tighten to secure the shade.

4. Insert a bulb – Max 100 Watt (Type A) Standard (not included) into the socket (E)

Care instructions:

·Clean with soft, dry cloth.

·Always avoid the use of harsh chemicals or abrasive cleaners as they may
cause damage to the lamp.

F

A

J
B

C

E

8670143

page 1 of 1