West Elm Capiz Floor Lamp Assembly Instruction

! Use with a type A bulb. DO NOT USE WITH A BULB EXCEEDING 100 WATTS.

! Electric bulb should be centered inside the shade, making sure it does not

touch the sides of the shade.

! Recommended for use with west elm lamp shades only.

1. Pull the wire from the upper tube (E) through the lower tube (C). Turn the
lower tube (C) onto the upper tube (E) in a clockwise direction to tighten.

2. Pull the wire from the lower tube (C) through the base (D). Insert lower tube
(C) into base (D). Turn the lamp base (D) in a clockwise direction to tighten.

capiz floor lamp

assembly instructions

B

3. Unscrew the ring (B) from the socket (A) of the lamp base.

4. Insert the socket (A) through the ring in the lamp shade and secure by
screwing ring (B) tightly back onto the socket.

5. Screw in lightbulb.

A

E

C

CARE INSTRUCTIONS.

Hardware may loosen over time. Periodically check that all connections are tight.

Wipe base with a soft, dry cloth. To protect the finish, avoid the use of all chemicals and household cleaners.

7910383/7910409—‚03/06

D

page 1 of 1