bookshelf side table
! Tools required:
! Do not throw away packaging materials until assembly is complete.
! Assemble this item on a soft surface, such as cardboard or carpet, to protect finish.
! Proper assembly of this item requires 2 people.
assembly instructions
Hardware
AB
cam lock 10x cam bolt 10x
C
bolt m6 x 38mm 7x
EF
flat washer 7x wooden dowel 10x
G
D
lock washer 7x
hex key 1x
Page 1 of 41/4/10
bookshelf side table
assembly instructions
1. Insert dowel (F) into the center hole in the bottom of part #2. Align dowel with the hole in part #3. Press
together. insert bolt (C), lock washer (D), and at waher (E) through part #3 into part #2. Tighten with
supplied hex key.
Page 2 of 41/4/10
bookshelf side table
assembly instructions
2. Lay part #6 on a clean smooth surface. Insert dowels (F) into holes as shown in the drawing. Screw cam
bolts (B) into the holes shown in the drawing. Insert cam locks (A) into part #3 as shown. Press assembled
parts #2 and #3 from step 1 onto part #6. Turn Cam locks 1/2 turn with phillips head screwdriver to tighten.
3. insert dowel (F) into bottom of part #3. Screw cam bolt (B) into the bottom of part #3. Insert cam lock (A)
into the side of part #4. Press part #4 onto part #3 as the drawing shows. Turn cam lock 1/2 turn with
phillips head screwdriver to tighten.
4. Insert dowels (F) into the bottom of part #4 and #6 like the drawing shows. Align part #5 with the dowels.
Insert bolt (C), lock washer (D), and at washer (E) thru part #5 into parts #4 and #6. Tighten with supplied
hex key.
Page 3 of 41/4/10
5. Insert dowels (F) into parts #1 like the drawing shows.
Screw in cam bolts (B) into parts #1 like the drawing shows.
insert cam lock (A) into parts #2 and #6. Press part #1 onto
assembled shelves. Turn cam lock 1/2 turn with phillipshead
screwdriver to tighten.
bookshelf side table
assembly instructions
6. if your bookshelf side table does not sit level on your oor you will need to adjust the levlers on each
corner to accomodate uneven surfaces. Clockwise tightens raises the leveler and counterclockwise
lowers the leveler. You may need to adjust more than one leveler to get the shelves level.
CARE INSTRUCTIONS
Hardware may loosen overtime. Periodically check that all connections are tight.
Wipe with a soft, dry cloth. To protect nish, avoid the use of chemicals and household cleaners.
Page 4 of 41/4/10
Loading...