bookcase secretary
assembly instructions
! Tools Required:
! Do not throw away packaging materials until assembly is complete.
! Assemble this item on a soft surface, such as cardboard or carpet, to protect fi nish.
! Proper assembly of this item requires 2 people.
Hardware
1
cam bolt 4x
3
cam lock 4x
5
2
4
6
dowel 20x
bolt 10x
hex key 1x
fi le bar 4x
Page 1 of 79379280 - 01/14/09
Parts
bookcase secretary
assembly instructions
A
C
E
drawer box 1x
left side 1x
door box 1x
B
D
Mounting Plate 2x
right side 1x
top panel 1x
Anti tip kit 1x
Nylon Strap 1x
Small Screw 2x Large Screw 2x
Page 2 of 79379280 - 01/14/09
bookcase secretary
assembly instructions
1. Lay the right side (B) and the left side (C) onto a clean smooth surface such as cardboard or carpet.
Insert dowel (2) and cam bolt (1) into the holes shown in the drawing below.
1
2
B
C
Page 3 of 79379280 - 01/14/09
bookcase secretary
assembly instructions
2. Insert cam lock (3) into holes as shown in the drawing below. Align top shelf (D), drawer box(A), and door
box (E) with the left side (C). Extend drawer completely so that you can reach bolt holes. Insert bolt (4)
as shown. Tighten with hex key (5).
3
E
D
A
5
C
4
Page 4 of 79379280 - 01/14/09
bookcase secretary
assembly instructions
3. Align the right side onto the top (D), drawer box (A), and door box (E). Insert dowel (2) in holes shown
in the drawing below. Insert bolt (4) into holes shown. Tighten with hex key (5). Do not overtighten.
B
2
4
Page 5 of 79379280 - 01/14/09
bookcase secretary
assembly instructions
4. Stand secretary upright and open drawer. Insert le bar (6) into slots in side of drawer. You will need to
choose the slot that best ts the le size you are storing.
6
Page 6 of 79379280 - 01/14/09
bookcase secretary
assembly instructions
NOTICE: To prevent injury and property damage from unexpected tipping of furniture, we highly
recommend installation of the anti-tip kit included with this product.
Attaching unit to wall with anti-tip kits.
1. Determine where the unit is to be placed and mark location on the wall for the mounting bracket
screw holes. They should be placed approximatly 1” below the top on the back of the unit.
2. Attach the mounting bracket vertically to the wall by inserting the long screws provided through the
holes in the bracket and tightening securely using screwdriver. Screws must penetrate wall studs for
proper installation.
3. Next using the short screws attach the 2nd bracket to the back of the unit top.
4. Lace the nylon strap down through the brackets. Slide the thin end of the strap through the
receiving end of the nylon strap. Pull to tighten tower snug against wall.
Long Screw Short Screw
Adjustable levelers are installed in the legs to
accommodate uneven ooring. To adjust these levelers,
simply turn them counterclosckwise to raise the leg.
CARE INSTRUCTIONS
Hardware may loosen overtime. Periodically check that all connections are tight.
Wipe with a soft, dry cloth. To protect nish, avoid the use of chemicals and household cleaners.
Page 7 of 79379280 - 01/14/09
Loading...