West Elm Bond Small Desk Assembly Instruction

bond small desk
assembly instructions
! Tools required: ! Do not throw away packaging materials until assembly is complete. ! Assemble this item on a soft surface, such as cardboard or carpet, to protect fi nish. ! Proper assembly of this item requires 2 people.
Hardware
AB
C
E
G
I
D
wood dowel 8x
long bolt 12x
F
spring washer 12x
at washer 12x
H
short “L” bracket 2x
long “L” bracket 2x
short bolt 12x
Page 1 of 47088032 - 09-05-08
bond small desk
assembly instructions
1. Flip the desk top over onto a clean smooth surface. Pull the drawers out until they stop.
Page 2 of 47088032 - 09-05-08
bond small desk
assembly instructions
2. Insert can bolts (A) and wood dowels (C) into leg assemblies as shown. Insert cam locks into rails as shown in the drawing, making sure to line up the indicator mark points toward the end of the rail. Next align the leg assemblies to the side of the side of the desk and attach using long bolt (D), spring washer (E), and  at washer (F). Tighten with allen key.
A
B
NOTE: The top rail has 2 more holes than the bottom rail.
C
D
F
E
C
Page 3 of 47088032 - 09-05-08
bond small desk
assembly instructions
3. Place the short “L” brackets and long “L” brackets into the locatioins shown in the drawing. Insert short bolt (I) into each hole and tighten with supplied allen key. be sure not to overtighten. With the help of another person  ip the desk upright. Asjustable levelers are installed in the legs to accomodate uneven  ooring. To adjust these levelers simply turn then couterclockwise to raise the leg.
G
I
I
CARE INSTRUCTIONS Hardware may loosen overtime. Periodically check that all connections are tight. Wipe with a soft, dry cloth. To protect  nish, avoid the use of chemicals and household cleaners.
H
Page 4 of 47088032 - 09-05-08
Loading...