5413989, 5414052, 5442798, 5442806, 5442814, 5442822 – 09.17 .16 Page 1 of 9
Plinth Bed
assembly instructions
! Do not throw away any of the packaging materials until the assembly is complete.
! To protect the finish, assemble this item on a soft surface, such as cardboard or carpet.
! Proper assembly of this item requires 2 people.
CARE INSTRUCTIONS:
Hardware may loosen over time. Periodically check that all connections are tight. Wipe with a soft, dry cloth. To
protect the finish, avoid the use of chemicals and household cleaners. All hot serving dishes should be placed on a
trivet or pad. Any liquid spilled onto the table should be cleaned up immediately with a damp cloth.
5413989, 5414052, 5442798, 5442806, 5442814, 5442822 – 09.17 .16 Page 2 of 9
Plinth Bed
assembly instructions
A
Footboard
1x B Headboard
1x
C1
Side Rail Right
1x
C2
Side Rail Left
1x D Long Apron
2x E Short Apron Right
2x F Short Apron Left
2x G Divider
2x H Center Support Rail
(Not Required for Full bed)
1x
I
C
enter Support Leg
(Not Required for Full bed)
3x
J
C
enter Top Panel
(Full bed has 1pc only)
2x
K Side Top Panel
2x
Parts
:
5413989, 5414052, 5442798, 5442806, 5442814, 5442822 – 09.17 .16 Page 3 of 9
Plinth Bed
assembly instructions
PARTS:
L
Allen Key 1x
M
Bolt M6x80mm 22x
N
Bolt M6x30mm 26x
O
Spring Washer (M6) 48x
P
Flat Washer (M6) 48x
1. Attach Long Apron (D) to Footboard (A). Insert Bolt (M) with Washers (O&P) to secure with the
supplied Allen Key.
5X
5413989, 5414052, 5442798, 5442806, 5442814, 5442822 – 09.17 .16 Page 4 of 9
Plinth Bed
assembly instructions
2. Attach the remaining Long Apron (D) to Headboard (B). Insert Bolt (M) with Washers (O&P) to secure
with the supplied Allen Key.
5X
5413989, 5414052, 5442798, 5442806, 5442814, 5442822 – 09.17 .16 Page 5 of 9
Plinth Bed
assembly instructions
3. Attach Short Apron Left/Right (E&F) to each Side Rail (C1 & C2). Insert Bolt (M) with Washers (O&P) to
secure with the supplied Allen Key.
12X
5413989, 5414052, 5442798, 5442806, 5442814, 5442822 – 09.17 .16 Page 6 of 9
Plinth Bed
assembly instructions
4. Connect Headboard (B) and Dividers (G) to one assembled Side Rail with Bolt (N) and Washers (O&P).
Then attach the other assembled Side Rail to the Headboard and Dividers with Bolt (N) and Washers
(O&P). Secure with the supplied Allen Key.
16X
2X
cleat
5413989, 5414052, 5442798, 5442806, 5442814, 5442822 – 09.17 .16 Page 7 of 9
Plinth Bed
assembly instructions
5. Attach Footboard (A) to the assembled piece. Insert Bolt (N) with Washers (O&P) to secure with the
supplied Allen Key.
N
OTE: FOR FULL SIZED BED, SKIP TO STEP#8.
6. Align the Center Support Legs (I) to the Center Support Rail (H) as shown and screw them into place by
turning them clockwise. DO NOT OVERTIGHTEN!
6X
5413989, 5414052, 5442798, 5442806, 5442814, 5442822 – 09.17 .16 Page 8 of 9
Plinth Bed
assembly instructions
7. Attach the Center Support Rail with Legs to cut-outs on the Headboard/Footboard and Dividers.
Adjust levelers to keep bed level when needed. Insert Bolt (N) with Washers (O&P) to secure to
headboard and footboard with the supplied Allen Key.
2X
5413989, 5414052, 5442798, 5442806, 5442814, 5442822 – 09.17 .16 Page 9 of 9
Plinth Bed
assembly instructions
8. Place Top Panels (J&K) onto the bed platform as shown below.
FULL BED
QUEEN/KING BED
Loading...