2 cube media
assembly instructions
!
CAUTION
The top shelf of this cart/stand is intended for use with: Plasma/LCD Televisions having a
maximum screen size of 26” and a weight of 30 lbs or tube televisions having a maximum
screen size of 24” and weight of 70 lbs.
! Tools supplied
! Tools required:
! Do not throw away packaging materials until assembly is complete.
! Assemble this item on a soft surface, such as cardboard or carpet, to protect fi nish.
! Proper assembly of this item requires 2 people.
Hardware
AB
bolt (8mm x 75mm) metal washer 8x
CD
E
lock washer 8x snap-lock 4x
F
screw (9mm x 25mm) 16x
wooden dowel 12x
Page 1 of 45531512/5531538/5531520 - 04-30-08
2 cube media
assembly instructions
1. Insert 8 wooden dowels (F) into holes as shown in drawing. Assemble shelf with side panel as shown.
2. Attach the bottom panel to the side panel with bolts (A), lock washers (C), metal washers (B). Tighten
with supplied allen key.
B
C
Allen
key
A
Page 2 of 45531512/5531538/5531520 - 04-30-08
2 cube media
assembly instructions
3. (OPTIONAL) Attach 4 casters to the bottom panel with screws (E), tighten with phillips
head screwdriver.
D
4. (OPTIONAL) Insert 4 wooden dowels as drawing shows. Attach 2 legs to the bottom panel with bolts (A),
lock washers (C), metal washers (B). Tighten with allen key (D).
B
C
A
F
Page 3 of 45531512/5531538/5531520 - 04-30-08
2 cube media
5. Set the storage unit upright.
assembly instructions
6. Using a philips head screwdriver, screw the snap-lock (D) into the holes on top of side panels.
7. Align the holes on the top panel with the snap-locks on the top of the side panels. Insure alignment
of snap-locks (D) with holes and press down rmly on the top panel until each peg snaps into place.
D
CARE INSTRUCTIONS
Hardware may loosen overtime. Periodically check that all connections are tight.
Wipe with a soft, dry cloth. To protect nish, avoid the use of chemicals and household cleaners.
Page 4 of 45531512/5531538/5531520 - 04-30-08
Loading...