Westell PS71090 P8 User Manual

5689

PRODUCT MANUAL

PS71090-P8 Product Manual

October 2017, Rev A

PS71090-P8 2W Public Safety Signal

Booster

Users Guide

WESTELL.COM

1.877.844.4274 Page 1 of 51

PS71090-P8 Product Manual

October 2017, Rev A

DISCLAIMER

All information and statements contained herein are accurate to the best of Westell Technologies knowledge. Westell makes no warranty with respect there to, including without limitation any results that may be obtained from the products described herein or the infringement by such products of any property rights of any persons. Use or application of such information or statements is at the users’ sole risk, without any liability on the part of Westell. Nothing herein shall be construed as license or recommendation for use, which infringes upon any propriety rights of any person. Product material and specifications are subject to change without notice. Westell standard terms of sale and the specific terms of any particular sale apply.

1.877.844.4274 Page 2 of 51

WESTELL.COM

PS71090-P8 Product Manual

October 2017, Rev A

Table of Contents

PREFACE................................................................................................................................... 7

Purpose ................................................................................................................................................................ 7

Scope……………………………………………………………………………………………………………….…7

Audience .............................................................................................................................................................. 7

Document Organization ................................................................................................................................... 8

References ........................................................................................................................................................... 9

Document Conventions .................................................................................................................................... 9

Safety Notices .................................................................................................................................................. 10

Technical Support ............................................................................................................................................ 10

Acronyms and Abbreviations ........................................................................................................................ 10

Copyright and Trademark Acknowledgements ......................................................................................... 10

1 GENERAL INFORMATION ............................................................................................... 11

1.1 Document Purpose and Intended Users ............................................................................................. 11

1.2 Application ................................................................................................................................................ 11

1.2.1 Product Registration Information ........................................................................................................................ 11

1.3 Safety Guidelines ....................................................................................................................................... 12

1.3.1 Important Safety Information ..................................................................................................................................... 13

1.4 FCC Part 90 Signal Boosters ................................................................................................................... 13

1.5 FCC Contact Information ......................................................................................................................... 14

2 PRODUCT OVERVIEW

2.1 Product Information ................................................................................................................................. 15

2.2 Product Features ....................................................................................................................................... 15

2.3 Included Accessories .................................................................................................................. 16

1.877.844.4274 Page 3 of 51

......................................................................................................................... 15

WESTELL.COM

PS71090-P8 Product Manual

October 2017, Rev A

2.4 Optional Accessories ................................................................................................................................ 17

3 PRODUCT SPECIFICATION .............................................................................................. 18

3.1 RF Specifications ....................................................................................................................................... 18

3.2 Power Specification .................................................................................................................................. 19

3.3 Mechanical Specification ......................................................................................................................... 19

3.4 Environmental Specification ................................................................................................................... 20

3.5 GUI Items .................................................................................................................................................... 20

3.6 Alarm Status .............................................................................................................................................. 21

3.7 Alarm Relay ................................................................................................................................................ 23

4 PRODUCT APPEARANCE................................................................................................. 24

4.1 External Configuration ............................................................................................................................. 24

5 INSTALLATION GUIDELINES ........................................................................................... 25

5.1 Important Installation Guidelines .......................................................................................................... 25

5.2 Donor Antenna Installation Guidelines ................................................................................................ 26

5.3 Indoor Antenna Installation Guidelines ................................................................................................ 26

5.4 Mounting the Signal Booster ................................................................................................................. 27

5.5 Verifying the Physical System Setup ..................................................................................................... 28

5.6 Controlling the Signal Booster ............................................................................................................... 28

5.7 Connecting to the Alarm Relay Panel ................................................................................................... 29

5.8 Connecting the Power Cable................................................................................................................... 31

5.9 Connecting the Battery Back-up Cable ................................................................................................ 33

6 SYSTEM OPERATION ....................................................................................................... 34

6.1 Operating the Program ............................................................................................................................ 34

6.2 Status .......................................................................................................................................................... 36

6.3 Control .......................................................................................................................................... 40

WESTELL.COM

1.877.844.4274 Page 4 of 51

PS71090-P8 Product Manual

October 2017, Rev A

7.0 INSTALLING SOFTWARE INSTALLATION ................................................................. 45

7.1 Upgrading the Firmware ......................................................................................................................... 45

7.2 IP Change ................................................................................................................................................... 46

7.2.1 IP Change Window .......................................................................................................................................................... 47

7.2.2 Static IP Setting ..................................................................................................................................... 47

7.2.3 DHCP IP Setting ..................................................................................................................................... 48

APPENDIX A IMPORTANT PRODUCT INFORMATION .............................................. 49

A.1 Registration Number ............................................................................................................................... 49

A.2 UL ………………………………………………………………………………………………………………49

APPENDIX B ACRONYMS AND ABBREVIATIONS ...................................................... 50

APPENDIX C VSWR ALARM DIAGRAM ....................................................................... 50

TABLE OF FIGURES

Figure 1-1: Product Registration……..................................................................................................... 11

Figure 4-1: External Product Configuration.......................................................................................... 24

Figure 5-1: Repeater Mounting Bracket Mounted on Repeater Rear.................................................. 27

Figure 5-2A: Ethernet Cable................................................................................................................. 28

Figure 5-2B: Ethernet Connectors........................................................................................................ 28

Figure 5-3: Stripped Cable Conductors……........................................................................................... 29

Figure 5-4: Alarm Relay 9 Position D-Sub Connector........................................................................... 29

Figure 5-5: Alarm Relay Cable Connected to Repeater........................................................................ 30

Figure 5-6: Remove the Power Connector Cap.................................................................................... 31

Figure 5-7: Connector Keys.................................................................................................................. 31

1.877.844.4274 Page 5 of 51

WESTELL.COM

PS71090-P8 Product Manual

October 2017, Rev A

Figure 5-8: Power Cable Connected to Repeater……........................................................................... 32

Figure 5-9: Power Cable Connected to Repeater................................................................................. 32

Figure 5-10: Battery Cable Connected to Repeater............................................................................. 33

Figure 6-1: Network Connection Set-up .............................................................................................. 34

Figure 6-2: Destination Directory…….…………………............................................................................... 35

Figure 6-3: Software Installation…………………....................................................................................... 35

Figure 6-4: PS71090 GUI Log-In………………............................................................................................ 35

Figure 6-5: Status Mode………………………............................................................................................... 36

Figure 6-6: Control Mode………............................................................................................................. 40

Figure 7-1: Firmware Upgrade Progress Window showing File Open tab ........................................... 45

Figure 7-2: Firmware Version Check….................................................................................................. 45

Figure 7-3: Firmware Update Status.................................................................................................... 46

Figure 7-4: IP Settings........................................................................................................................... 46

Figure 7-5: IP Change WIndow............................................................................................................. 47

Figure 7-6: Static IP Address….………………………..................................................................................... 47

Figure 7-7: DHCP IP Address….............................................................................................................. 48

LIST OF TABLES

Table P-1: Document Conventions........................................................................................................ 9

Table 2-1: Included Accessories........................................................................................................... 16

Table 2-2: Optional Accessories ...........................................................................................................17

Table 3-1: RF Specifications................................................................................................................. 18

Table 3-2: Power Specifications........................................................................................................... 19

Table 3-3: Mechanical Specifications................................................................................................... 19

Table 3-4: Environmental Specifications.............................................................................................. 20

Table 3-5: GUI Items............................................................................................................................. 20

Table 3-6: Alarm Status........................................................................................................................ 21

Table 3-7: Alarm Relay......................................................................................................................... 23

Table 5-1: Alarm Relay Connections.................................................................................................... 30

1.877.844.4274 Page 6 of 51

WESTELL.COM

PS71090-P8 Product Manual

October 2017, Rev A

Table B-1: Acronyms and Abbreviations.............................................................................................. 50

Preface

This Preface includes the following:

• Purpose

• Scope

• Audience

• Document Organization

• References

• Document Conventions

• Safety Notices

• Technical Support

• Acronyms and Abbreviations

• Copyright and Trademark Acknowledgements

Purpose

This manual contains information and procedures for the operation of the Westell PS71090 Public Safety Signal Booster.

Changes that occur after the publishing date may be incorporated by a complete manual revision or as additions.

Scope

Reference this manual when there is a need to add enhanced signal capability to a new or existing system, to monitor a system, make maintenance adjustments, or address alarms.

Audience

This manual is intended for installers and users who are familiar with similar types of equipment.

1.877.844.4274 Page 7 of 51

WESTELL.COM

Document Organization

This manual includes the following chapters:

•

Chapter 1: General Information – Outlines the document purpose and intended users, application, product registration, safety guidelines, disclaimer and FCC Part 90, FCC Warning Labels.

•

Chapter 2: Product Overview – Provides product information, describes product features and lists accessories.

•

Chapter 3: Product Specification – Provides tables containing RF, power, mechanical and environmental specifications. Also provides information about GUI items, alarm status and alarm relay.

PS71090-P8 Product Manual

October 2017, Rev A

•

Chapter 4: Product Appearance – Provides physical specifications, photographs and information about the external and internal Signal Booster configuration.

•

Chapter 5: Installation Guidelines – Lists guidelines for installing the Signal Booster and antennas.

•

Chapter 6: Software Installation – Outlines the steps required to install the software.

•

Chapter 7: System Operation – Describes product operation, including how to open the communication port and describes the functions in the Status and Control pages.

•

Appendix A: Important Product Information – Provides the product registration number and internal power supply information.

•

Appendix B: Acronyms and Abbreviations – A table of acronyms and abbreviations and definitions for each.

1.877.844.4274 Page 8 of 51

WESTELL.COM

References

Convention

Descriptio

DANGER!

Description of an imminent hazard that, if not avoided, may result in severe personal

WARNING!

Description of an imminent hazard that, if not avoided, may result in personal injury or

CAUTION

Description of a conditions or practice that could cause damage to equipment or

IMPORTANT

Additional important information that the user must be aware of, but is not related to a

NOTE

Additional information that is beneficial for the user to know, but is not related to a

Bold

Bold text indicates an action or provides emphasis.

Click

Instructs the user to press the primary (typically left) mouse button while the

pointer is

Right

click

Instructs the user to press the secondary (typically right) mouse button while the pointer

Double

click

Instructs the user to press the primary (typically left) mouse

button twice, rapidly, while

Select

Instructs the user to perform a selection on the screen by clicking an active object.

Enter

Instructs the user to type text using the keyboard.

Indicates a level in

a menu. For example,

Start>Programs

prompts the user to click on

References

References References

•

FCC Part 90

Document Conventions

Document Conventions Document Conventions

Table P-1 lists the conventions used throughout this document.

Table P-1: Document Conventions

injury or death. Before you work on equipment, be aware of the hazards involved with electrical and RF circuitry and be familiar with standard practices for preventing accidents.

serious equipment damage.

PS71090-P8 Product Manual

October 2017, Rev A

property. Communicates information that is crucial to preventing loss of data or damage to hardware or software, and actions that could result in equipment failure.

hazard.

over the specified location.

is over the specified location.

the pointer is over the specified location.

Start, then locate and click Programs under the Start menu.

1.877.844.4274 Page 9 of 51

WESTELL.COM

PS71090-P8 Product Manual

October 2017, Rev A

Safety Notices

Safety Notices Safety Notices

This general safety information applies to both operating and service personnel. Specific warnings and cautions are located in other parts of this manual where they apply and may not appear in this summary. Failure to comply with these precautions or specific warnings elsewhere in the manual violates the safety standards of design, manufacture, and intended use of equipment.

Westell assumes no liability for the customer’s or user’s failure to comply with these requirements:

•

Explosive atmospheres - To avoid explosion or fire, do not operate this product in the presence of flammable gases or fumes.

•

Lightning danger - Do not install or make adjustments to this unit during an electrical storm.

WARNING!

Changes and Modifications not expressly approved by Westell can void your authority to operate this equipment under Federal Communications Commission’s rules.

Technical Support

Technical SupportTechnical Support

If you suspect a malfunction with this product or have a technical question, call your dealer or the Westell Support Line at: (603) 626-6677, Toll Free (USA) 1-877-844-4274, press option 2, and then option 1. Westell Support can also be reached via email at IBWsupport@westell.com.

Acronyms and Abbreviations

Acronyms and Abbreviations Acronyms and Abbreviations

Refer to Appendix B for definitions of the acronyms and abbreviations used in this manual.

The following products are referred to in this manual:

• is a registered trademark of Westell Technologies, Inc.

1.877.844.4274 Page 10 of 51

WESTELL.COM

PS71090-P8 Product Manual

October 2017, Rev A

1 General Information

1.1 Document Purpose and Intended Users

The purpose of this document is to provide a step-by-step procedure to help experienced technicians or engineers install and commission an in-building Passive Wireless Distributed Antenna System (DAS) using Westell’s PS71090 2W Public Safety Signal Booster. Follow the instructions in this guide to minimize risks associated with modifying a live system and preclude service interruptions. This document assumes the technician or engineer understands the basic principles and functionality involved with an RF Signal Booster and in-building wireless systems. This guide has been written to address the practical concerns of the installer.

1.2 Application

Use this guide whenever there is a need to add enhanced signal capability to an existing system or when a Signal Booster is included in a new installation.

1.2.1 Product Registration Information

The serial number is located on the label on right-side of the enclosure. Record this number in Figure 1-1. Retain this manual, along with proof of purchase, to serve as a permanent record of your purchase.

Figure 1-1: Product Registration

1.877.844.4274 Page 11 of 51

WESTELL.COM

PS71090-P8 Product Manual

October 2017, Rev A

1.3 Safety Guidelines

The general safety information in this guideline applies to both operations and service personnel. Specific warnings and cautions are located in the applicable manual sections, but may not appear in this summary. Failure to comply with these precautions or specific warnings elsewhere in the manual violates safety standards of design, manufacture, and intended use of equipment. Westell assumes no liability for the customer’s failure to comply with these requirements:

Grounding: This Signal Booster is designed to operate at 110VAC @ 1.0A maximum current and must always be operated with the ground wire properly connected.

Explosive atmospheres: To avoid explosion or fire, do not operate this product in the presence of flammable gases or fumes.

Lightning danger: Do not install or adjust this unit during an electrical storm.

No user-serviceable parts are inside the unit. Hazardous voltages are present when the cover is removed. Opening the chassis will void your warranty. If you suspect a malfunction with this product, call your dealer or Westell’s technical support line at 1.877.844.4274.

CAUTION

Turn the Signal Booster power off when connecting or disconnecting cables.

1.877.844.4274 Page 12 of 51

WESTELL.COM

PS71090-P8 Product Manual

October 2017, Rev A

1.3.1 Important Safety Information

Antennas used for the purpose of radiating signals indoors are limited to a maximum gain of 3 dBi. Each antenna must be positioned to observe minimum separation requirements from all users and bystanders.

The following guidelines must be used when considering separation distances:

•

Indoor antennas must be placed so that under normal conditions, personnel cannot come within 20 cm (~8 in) of any inside antenna. Adhering to this minimum separation will ensure that the employee or bystander cannot exceed RF exposures beyond the maximum permissible limit as defined by FCC Regulations section 1.1310 Limits for general population/uncontrolled exposure.

•

Outdoor antenna must be positioned so that under normal conditions, personnel cannot approach closer than 120 cm (~4 ft.). A directional antenna having a maximum gain of 3.75 dBi is used, and precautions should be taken to prevent personnel from routinely passing through the main radiation beam at a distance closer than specified.

1.4 FCC Part 90 Signal Boosters

WARNING!

THIS IS A 90.219 CLASS B DEVICE

This is not a consumer device. It is designed for installation by FCC licensees and qualified installers. You must have an FCC license or express consent of an FCC Licensee to operate this device. You must register class B signal boosters (as defined in 47 CFR 90.219) online at www.fcc.gov/signal-boosters/registration. Unauthorized use may result in significant forfeiture penalties, including penalties in excess of $100,000 for each continuing violation.

FCC Warning Labels

The following labels will appear on the PS71090 Signal Booster in accordance with the FCC:

1.877.844.4274 Page 13 of 51

WESTELL.COM

FCC Label Placement on the PS71090:

PS71090-P8 Product Manual

October 2017, Rev A

Right-Side View

1.5 FCC Contact Information:

Federal Communications Commission

445 12th Street SW

Washington, DC 20554

Phone: 1-888-225-5322

TTY: 1-888-835-5322

Fax: 1-866-418-0232

1.877.844.4274 Page 14 of 51

WESTELL.COM

PS71090-P8 Product Manual

October 2017, Rev A

2222 Product Overview

2.1 Product Information

The PS71090 Signal Booster was developed for use in enclosed structures where signals from local public safety towers to operate mobile units is poor or unavailable. Adequate signal strength must be available outside the structure as a prerequisite to achieving in-building coverage. The device is connected to an external antenna, normally located on a roof, and to one or more internal antennas placed strategically throughout the area where wireless service is desired.

The external antenna is typically directional, such as a Yagi or Panel antenna. Internal antennas are typically omnidirectional, although various other types may be used, depending on the coverage application. The Signal Booster amplifies both the uplink (mobile to base) and downlink (base to mobile) signals, thus facilitating communications to and from the intended wireless infrastructure.

With a maximum total of 90 dB nominal gain on both the uplink and downlink, gain can be adjusted over a range from 60 dB to 90 dB in 1 dB steps.

The Signal Booster is controlled using a computer connected to the RJ45 Female Network Connector labeled ‘GUI’. There are also LED indicators to indicate alarm status, OSC and power. Refer to Figure 4-1.

2.2 Product Features

•

Easy installation

•

Light and small

•

Control using a Windows-based Graphical User Interface (GUI) and accessed by connecting a laptop or desktop computer to the 8P8C/RJ45 Female Network Connector labeled ‘GUI’

•

User gain control

•

Automatic level control

•

Automatic shutdown function

•

Oscillation protection

•

Overdrive protection

•

Under/over voltage protection

•

Fault protection

•

Alarm notification

•

SNMP

•

Persistent status and error information

•

Battery Back-up Input

1.877.844.4274 Page 15 of 51

WESTELL.COM

PS71090-P8 Product Manual

Quantity

Description

1 AC Power Cable, 5 feet 10 inches

1 DC Power Cable, 5 feet 10 inches

1 Ethernet cable, 6 feet 1 inch

1 Alarm Relay Serial Cable, 4 feet 9 inches

1 USB Drive containing the User Manual and

Software

5 Mounting Screws

5 Drywall Anchors

2 Cabinet Keys

October 2017, Rev A

2.3 Included Accessories

Table 2-1 contains the items that are shipped with the PS71090 Public Safety Signal Booster.

Table 2-1: Included Accessories

1.877.844.4274 Page 16 of 51

WESTELL.COM

+ 35 hidden pages

Westell PS71090 P8 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual