Westell CSI510-02 Users Manual

Cellular Specialties, Inc.

Model 510Model 510AMPSInIn--Building AmplifierBuilding Amplifier

Installation and Users Manual

The serial number may be found on the label on the rear panel of the unit. For your

convenience, note this number below, and retain this manual, along with proof of purchase , to

serve as a permanent record of your purchase in the event of a theft, or for future reference.

MODEL NUMBER

SERIAL NUMBER

This device complies with parts 22 and 2 of
the FCC Rules.

510

DATE OF PURCHASE

NAME OF COMPANY

FCC ID NVRCSI510-02

DISCLAIMER

All information and statements contained herein are accurate to the best of the knowledge of Cellular Specialties, but Cellular Specialties makes no warranty
with respect thereto, including without limitation any results which may be obtained from the products described herein or the infringement by such products of
any proprietary rights of any persons. Use or application of such information or statements is at the user's sole risk, without any liability on the part of Cellular
Specialties, Inc. Nothing herein shall be construed as license or of recommendation for use, which infringes upon any proprietary rights of any person.

2

Product material and specifications are subject to change without notice. All sales of the product or products described herein are subject to Cellular
Specialties' standard terms of sale and the specific terms of any particular sale.

TABLE OF CONTENTS

1.0 SAFETY GUIDELINES

2.0 PRODUCT DESCRIPTION

3
4

MECHANICAL OUTLINE DRAWING 5

3.0 GENERAL SPECIFICATIONS

4.0 INSTALLATION

5.0 AMPLIFIER ADJUSTMENT

6.0 TROUBLESHOOTING

6
7
9

10

MANUAL510AMPS OMNI

3

!!

The general safety information in this guideline applies to both operating

nel. Specific warnings and cautions will be found in
other parts of this manual where they apply, but may not appear in this
summary. Failure to comply with these precautions or specific warnings

n,
manufacture, and intended use of equipment. Cellular Specialties, Inc.
assumes no liability for the customer's failure to comply with these

1.0

SAFETY GUIDELINES

and service person

elsewhere in the manual violates safety standards of desig

requirements.

Ø GROUNDING

This amplifier system is designed to operate from single-phase 120VAC power and should
always be operated with both the neutral and ground wires properly connected. Do not
remove or otherwise alter the grounding lug on the power cord.

Ø EXPLOSIVE ATMOSPHERES

This product has an integral circuit breaker, which may cause an electrical flash if the
breaker should reset. To avoid explosion or fire, do not operate this product in the presence of
flammable gases or fumes.

Ø LIGHTNING DANGER

Do not install or make adjustments to this unit during an electrical storm.

Ø NO USER SERVICEABLE PARTS INSIDE

HAZARDOUS VOLTAGES ARE PRESENT WHEN THE COVER IS REMOVED.
Opening the chassis will void your warranty. If you suspect a malfunction with this product, call

MANUAL510AMPS OMNI

your dealer or the Cellular Specialties Support Line at [phone].