I2t capacity for fusing tp=10ms, Vrm≤10V, (note 5)
Operating temperature range-55 to +160°C
Storage temperature range-55 to +160°C
=25°C, (note 4)6801A
sink
=55°C, (note 2)4096A
sink
=85°C, (note 2)3346A
sink
=85°C, (note 3)2163A
sink
=25°C, (note 2)7460A
sink
, (note 5)41.7kA
RRM
, (note 5)8.7×10
RRM
Data Sheet Issue:- 2
MAXIMUM
LIMITS
MAXIMUM
LIMITS
45.9kA
6
10.5×10
6
UNITS
UNITS
A2s
A2s
Notes:-
1) De-rating factor of 0.13% per °C is applicable for T
2) Double side cooled, single phase; 50Hz, 180° half-sinewave.
3) Single side cooled, single phase; 50Hz, 180° half-sinewave.
4) Double side cooled.
5) Half-sinewave, 160°C T
Data Sheet. Types W4096Z#340 to W4096Z#450 Issue 2Page 1 of9February, 2008
initial.
j
below 25°C.
j
WESTCODE
WESTCODE An IXYS Company Rectifier Diode Types W4096Z#340 to W4096Z#450
WESTCODEWESTCODE
Characteristics
PARAMETERMIN.TYP.MAX. TEST CONDITIONS (Note 1)UNITS
V
V
V
r
I
I
Q
Q
I
t
R
FM
FM
T0
T
RRM
RRM
rr
ra
rr
rr
thJK
Maximum peak forward voltage--1.68ITM=6000AV
Maximum peak forward voltage--2.9ITM=12300AV
Threshold voltage--0.73V
Slope resistance--0.158
Peak reverse current--200Rated V
Peak reverse current--200Rated V
RRM
, Tj=25°CmA
RRM
mΩ
mA
Recovered charge-9500-µC
Recovered charge, 50% Chord-60006800µC
Reverse recovery current-270-A
Reverse recovery time-45-
Thermal resistance, junction to heatsink
--0.011 Double side cooledK/W
I
=1000A, tp=1000µs, di/dt=10A/µs,
TM
V
=50V
r
µs
--0.022 Single side cooledK/W
FMounting force27-47kN
W
Weight
t
Notes:-
1) Unless otherwise indicated T
=160°C.
j
-1.7-Outline Options ZC, ZT and ZY
-1.2-Outline Options ZD and ZV
kg
2) For other clamp forces, please consult factory.
Notes on rupture rated packages.
This product is available with a non-rupture rated package.
For additional details on these products, please consult factory.
Data Sheet. Types W4096Z#340 to W4096Z#450 Issue 2Page 2 of9February, 2008
WESTCODE
WESTCODE An IXYS Company Rectifier Diode Types W4096Z#340 to W4096Z#450
This report is applicable to other voltage grades when supply has been agreed by Sales/Production.
3.0 De-rating Factor
A blocking voltage de-rating factor of 0.13%/°C is applicable to this device for Tj below 25°C.
4.0 Snubber Components
When selecting snubber components, care must be taken not to use excessively large values of snubber
capacitor or excessively small values of snubber resistor. Such excessive component values may lead to
device damage due to the large resultant values of snubber discharge current. If required, please consult
the factory for assistance.
5.0 Computer Modelling Parameters
DRM VDSM VRRM
V
V
RSM
V
V
V
D
DC V
R
5.1 Device Dissipation Calculations
2
I
=
AV
Where VT0=0.826V, rT=0.104mΩ,
R
= Supplementary thermal impedance, see table below and