1) De-rating factor of 0.13% per °C is applicable for T
2) Double side cooled, single phase; 50Hz, 180° half-sinewave.
3) Cathode side cooled, single phase; 50Hz, 180° half-sinewave.
4) Double side cooled.
5) Half-sinewave, 180°C T
Provisional Data Sheet. Types W3455QK200 to W 3455QK220 Issue 1Page 1 of9August 2006
initial.
j
below 25°C.
j
WESTCODE
WESTCODE An IXYS CompanyWespack Rectifier Diode Types W3455QK200 to W3455QK220
WESTCODEWESTCODE
Characteristics
PARAMETERMIN.TYP.MAX. TEST CONDITIONS (Note 1)UNITS
V
V
V
r
I
Q
Q
I
t
T
RRM
rm
rr
Maximum peak forward voltage--1.35IFM=3000AV
FM
Maximum peak forward voltage--2.38IFM=10400AV
FM
Threshold voltage--0.940V
T0
Slope resistance--0.139
Peak reverse current--50Rated V
Recovered charge-2600-µC
rr
Recovered charge, 50% chord-20002350µC
ra
Reverse recovery current-150-A
I
TM
V
RRM
=1000A, tp=1000µs, di/dt=10A/µs,
=50V
r
Reverse recovery time, 50% chord-27-
mΩ
mA
µs
--0.0170 Double side cooledK/W
Thermal resistance, junction to heatsink
thJK
--0.0303 Anode side cooledK/WR
--0.0387 Cathode side cooledK/W
FMounting force16-20Note 2kN
W
Weight-200-g
t
Notes:-
1) Unless otherwise indicated T
=180°C.
j
2) For other clamp forces, please consult factory.
Provisional Data Sheet. Types W3455QK200 to W 3455QK220 Issue 1Page 2 of9August 2006
WESTCODE
WESTCODE An IXYS CompanyWespack Rectifier Diode Types W3455QK200 to W3455QK220
WESTCODEWESTCODE
Notes on Ratings and Characteristics
1.0 Voltage Grade Table
V
Voltage Grade
20200021001250
22220023001350
2.0 Extension of Voltage Grades
This report is applicable to other voltage grades when supply has been agreed by Sales/Production.
3.0 De-rating Factor
A blocking voltage de-rating factor of 0.13%/°C is applicable to this device for Tj below 25°C.
4.0 Snubber Components
When selecting snubber components, care must be taken not to use excessively large values of snubber
capacitor or excessively small values of snubber resistor. Such excessive component values may lead to
device damage due to the large resultant values of snubber discharge current. If required, please consult
the factory for assistance.
5.0 Computer Modelling Parameters
5.1 Device Dissipation Calculations
2
4
I
=
AV
Where VT0=0.940V, rT=0.139m Ω,
00
2
2
⋅⋅
RRM
V
2
rff
T
WrffVV
⋅⋅⋅++−
AVTTT
and:
V
RSM
V
W
AV
=
∆
R
T
th
max
V
R
DC V
TTT
−=∆
Kj
R
= Supplementary thermal impedance, see table below and