Weslo WLTL34305.1 Owner's Manual

Model No. WLTL34305.1

Visit our website at

www.weslo.com

new products, prizes,

fitness tips, and much more!

Serial No.

Serial Number

Decal

QUESTIONS?

As a manufacturer, we are com­mitted to providing complete
customer satisfaction. If you
have questions, or if parts are
damaged or missing, PLEASE
CONTACT OUR CUSTOMER
SERVICE DEPARTMENT
DIRECTLY.

USER'S MANUAL

CALL TOLL-FREE:

1-866-699-3756

Mon.–Fri., 6 a.m.–6 p.m. MST

ON THE WEB:
www.wesloservice.com

CAUTION

Read all precautions and instruc­tions in this manual before using
this equipment. Save this manual
for future reference.

TABLE OF CONTENTS

MPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

I

BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

SSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

A

OPERATION AND ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

HOW TO FOLD AND MOVE THE TREADMILL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

CONDITIONING GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover

ORDERING REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover

Note: An EXPLODED DRAWING and a PART LIST are attached in the center of this manual.

IMPORTANT PRECAUTIONS

WARNING: To reduce the risk of burns, fire, electric shock, or injury to persons, read the

following important precautions and information before operating the treadmill.

1. It is the responsibility of the owner to ensure
that all users of this treadmill are adequately
informed of all warnings and precautions.

2. Use the treadmill only as described.

3. Place the treadmill on a level surface, with at
least eight feet of clearance behind it and two
feet on each side. Do not place the treadmill
on any surface that blocks air openings. To
protect the floor or carpet from damage, place
a mat under the treadmill.

4. Keep the treadmill indoors, away from mois­ture and dust. Do not put the treadmill in a
garage or covered patio, or near water.

5. Do not operate the treadmill where aerosol
products are used or where oxygen is being
administered.

6. Keep children under the age of 12 and pets
away from the treadmill at all times.

The treadmill should be used only by persons

7.
weighing 250 pounds or less.

both men and women.

shoes. Never use the treadmill with bare feet,
wearing only stockings, or in sandals.

10. When connecting the power cord (see page 8),
plug the power cord into a surge suppressor
(not included) and plug the surge suppressor
into a grounded circuit capable of carrying 15
or more amps. No other appliance should be on
the same circuit. Do not use an extension cord.

11. Use only a single-outlet surge suppressor that
meets all of the specifications described on
page 8. To purchase a surge suppressor, see
your local Weslo dealer or call the toll-free
telephone number on the front cover of this
manual and order part number 146148, or see
your local electronics store.

Failure to use a properly functioning surge

12.
suppressor could result in damage to the con
trol system of the treadmill. If the control sys­tem is damaged, the walking belt may change
speed, accelerate, or stop unexpectedly,
which may result in a fall and serious injury.

Always wear athletic

-

8. Never allow more than one person on the
treadmill at a time.

9. Wear appropriate exercise clothes when
using the treadmill. Do not wear loose clothes
that could become caught in the treadmill.
Athletic support clothes are recommended for

13. Keep the power cord and the surge suppres­away from heated surfaces.

sor

14. Read, understand, and test the emergency

procedure before using the treadmill (see

stop

CONSOLE on page

HOW

9).

OPERATE

TO

THE

2

15. Never move the walking belt while the power
is turned off. Do not operate the treadmill if
the power cord or plug is damaged, or if the

readmill is not working properly. (See TROU-

t
BLESHOOTING on page 13 if the treadmill is
not working properly.)

16. Never start the treadmill while you are stand­ing on the walking belt. Always hold the
handrails while using the treadmill.

17. The treadmill is capable of high speeds.
Adjust the speed in small increments to avoid
sudden jumps in speed.

18. Never leave the treadmill unattended while it
is running. Always remove the key, unplug
the power cord and move the reset/off circuit
breaker to the off position when the treadmill
is not in use. (See the drawing on page 4 for
the location of the circuit breaker.)

19. Do not attempt to raise, lower, or move the
treadmill until it is properly assembled. (See
ASSEMBLY on page 5, and HOW TO FOLD
AND MOVE THE TREADMILL on page 12.)

You must be able to safely lift 45 pounds (20
kg) to raise, lower, or move the treadmill.

20. When folding or moving the treadmill, make
sure that the storage latch is fully closed.

1. Inspect and properly tighten all parts of the

2

treadmill regularly.

22. Never insert any object into any opening.

DANGER: Always unplug the power

23.
cord immediately after use, before cleaning
the treadmill, and before performing the main­tenance and adjustment procedures de­scribed in this manual. Never remove the
motor hood unless instructed to do so by an
authorized service representative. Servicing
other than the procedures in this manual
should be performed by an authorized service
representative only.

24. This treadmill is intended for in-home use
only. Do not use this treadmill in a commer­cial, rental, or institutional setting.

WARNING: Before beginning this or any exercise program, consult your physician. This

is especially important for persons over the age of 35 or persons with pre-existing health problems.
Read all instructions before using. ICON assumes no responsibility for personal injury or property
damage sustained by or through the use of this product.

SAVE THESE INSTRUCTIONS

The decals shown here have been placed on
the treadmill. If a decal is missing, or if it is
not legible, call the toll-free telephone num
ber on the front cover of this manual and
order a free replacement decal. Apply the
decal in the location shown.

-

3

BEFORE YOU BEGIN

hank you for selecting the WESLO

T

readmill. The CADENCE C66 treadmill combines

t
advanced technology with innovative design to let you
enjoy an excellent form of cardiovascular exercise in
the convenience and privacy of your home. And when
you’re not exercising, the unique CADENCE C66 can
be folded up, requiring less than half the floor space of
other treadmills.

For your benefit, read this manual carefully before
you use the treadmill. If you have questions after

reading this manual, please see the front cover of this
manual. To help us assist you, note the product model

Water Bottle Holder

(Bottle not included)

Storage Latch

®

ADENCE C66

C

umber and serial number before contacting us. The

n

odel number of the treadmill is WLTL34305.1. The

m
serial number can be found on a decal attached to the
treadmill (see the front cover of this manual for the lo­cation).

To avoid a registration fee for any service needed
under warranty, you must register the treadmill at
www.wesloservice.com/registration.

Before reading further, please review the drawing
below and familiarize yourself with the labeled parts.

Bookrack

Console

Key/Clip

Handrail

Walking Belt

Foot Rail

BACK

Rear Roller
Adjustment Bolts

Upright

RIGHT SIDE

Reset/Off

Circuit Breaker

Power Cord

Cushioned Walking Platform

for maximum exercise comfort

Incline Leg

4

ASSEMBLY

To hire an authorized service technician to assemble the treadmill, call toll-free 1-800-445-2480. Assembly
requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of

the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is coated with

igh-performance lubricant. During shipping, a small amount of lubricant may be transferred to the top of the walk-

h
ing belt or the shipping carton. This is a normal condition and does not affect treadmill performance. If there is lu-

ricant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.

b

Assembly requires the included allen wrenches and your own phillips screwdriver ,
wire cutters , adjustable wrench , and needlenose pliers . To avoid
damaging plastic parts, do not use power tools for assembly.

To identify the assembly hardware, see the PART IDENTIFICATION CHART in the center of this manual.

1. Make sure that the power cord is unplugged.

With the help of a second person, carefully tip the tread­mill onto its left side as shown. Partially fold the Frame
(75) so the treadmill is more stable. Do not fully fold the

treadmill until it is completely assembled.

Attach four Base Pads (40) to the Base (11) with four 1”
Tek Screws (87). Attach a Wheel (37) to the right side of
the Base with a Wheel Bolt (36) and a Wheel Nut (38).
Do not overtighten the Wheel Bolt; the Wheel should
turn freely.

2. See drawing 2a. Make sure that there are two U-nuts

(57) in the bottom of each Upright (62, 76).

Identify the Right Upright (62), which has a large round
hole and a slot near the lower end. While a second per­son holds the Right Upright near the Wire Harness (21),
insert the end of the Wire Harness into the round hole
and out of the upper end of the Right Upright.

Slide the slot in the Right Upright (62) onto the Upright
Lock Bracket (18) (see drawing 2b); slide the Right Upright
down until it reaches the Base (11). Make sure that the
Wire Harness (21) is not pinched. Attach the Right
Upright with two 2 1/4” Bolts (78) and two 5/16” Star
Washers (20).

With the help of a second person, tip the treadmill onto
its other side. Attach the Left Upright (76) as described
above. (Note: There is not a wire harness on the left
side.) Attach the other Wheel (not shown) to the Base
(11) as described in step 1.

1

75

2

62

Round Hole

2a

37

38

11

Slot

36

87

76

76, 62

18

57

40

40

87

11

2b

Side

View

21

40

20

40

87

87

78

18

62

5

. With the help of a second person, position the treadmill

3

with the Uprights (62, 76) in the vertical position as

hown.

s

oute the Wire Harness (21) through the bracket on the

R
Right Handrail (47) and out of the large hole in the side
of the Right Handrail. Next, insert the bracket on the
Right Handrail into the top of the Right Upright (62).

ttach the Right Handrail with two 1” Bolts (8) and two

A
1/4” Star Washers (9) as shown. Do not tighten the

Bolts yet.

Attach the Left Handrail (not shown) as described above.
Note: There is not a wire harness on the left side.

3

76

21

Large

ole

H

racket

B

7

4

8

9

8

9

62

4. Hold the Crossbar (34) between the Handrails (1, 47).
Attach the Crossbar with two Crossbar Screws (53) and
two Crossbar Star Washers (88).

Crossbar Screws yet.

Hold the Console (10) and the Console Base (46) near the
Handrails (1, 47). See the inset drawing. Route the
ground wire (A) from the Console Base through the open­ing in the side of the Console Cover (96). Next, route the
ground wire through the two indicated plastic ties on the
Console Base.

Attach the end of the ground wire (A) to the small hole in
the side of the Right Handrail (47) with a Silver Ground
Screw (70).

5. Place the Console Base (46) on the Right Handrail (47)
and the Left Handrail (not shown). Attach the Console
Base with four 3/4” Screws (13) (only two Screws are
shown). Do not tighten the Screws yet.

Insert the Wire Harness (21) through the two indicated
plastic ties on the Console Base (46). Next, insert the
Wire Harness up through the indicated opening in the
Console Base. Make sure that the Console Cover (96) is
securely attached to the Console Base.

See the inset drawing. Look at the top of the Console
Base (46). Insert the Wire Harness (21) through the plas­tic tie on top of the Console Base.

Do not tighten the

4

5

13

46

10

53

Ties

46

Ties

47

88

34

21

96

21

A

96

47

70

88

53

Tie

1

A

46

6