Model No. WLTL01906.0
Visit our website at
www.weslo.com
new products, prizes,
fitness tips, and much more!
erial No.
S
Serial Number
Decal
QUESTIONS?
As a manufacturer, we are committed to providing complete
customer satisfaction. If you
have questions, or if parts are
damaged or missing, PLEASE
CONTACT OUR CUSTOMER
SERVICE DEPARTMENT
DIRECTLY.
USER’S MANUAL
CALL TOLL-FREE:
1-866-699-3756
Mon.–Fri., 6 a.m.–6 p.m. MST
ON THE WEB:
www.wesloservice.com
CAUTION
Read all precautions and instruc
tions in this manual before using
this equipment. Save this manual
for future reference.
-
TABLE OF CONTENTS
IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
TREADMILL OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
AINTENANCE AND TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
M
CONDITIONING GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
PART LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
EXPLODED DRAWING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
ORDERING REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Back Cover
LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Back Cover
IMPORTANT PRECAUTIONS
WARNING: To reduce the risk of serious injury, read the following important precautions
before using the treadmill.
1. It is the responsibility of the owner to ensure
that all users of the treadmill are adequately
informed of all warnings and precautions.
2. Use the treadmill only as described.
3. This treadmill is intended for in-home use
only. Do not use the treadmill in a commercial, rental, or institutional setting.
4. Place the treadmill on a level surface, with
eight feet of clearance behind it. Place a mat
under the treadmill to protect the floor.
5. Inspect and properly tighten all parts of the
treadmill regularly; replace any worn parts
immediately
The roller guards must be 1/8 inch from the
6.
rear roller (see the drawing on page 3). Adjust
the roller guards, if necessary.
7. Keep children under the age of 12 and pets
away from the treadmill at all times.
The treadmill should not be used by persons
8.
weighing over 250 pounds. Never allow more
than one person on the treadmill at a time.
.
9. Wear appropriate clothes while using the
treadmill. Do not wear loose clothes that could
become caught on the treadmill.
10. Wear athletic shoes while using the treadmill;
do not use the treadmill with bare feet, wearing only stockings, or in sandals.
11. Do not use the treadmill if it is not working
properly.
12. Do not place your hands or feet under the
treadmill while it is in use.
13. Always hold the handrail when mounting,
dismounting, or exercising on the treadmill.
14. If you feel pain or dizziness while exercising,
stop immediately and begin cooling down.
15. Warning and caution decals have been placed
on the treadmill in the locations shown on
page 3. If a decal is missing or illegible, call
the toll-free telephone number on the front
cover of this manual and order a free replacement decal. Apply the decal in the location
shown.
WARNING: Before beginning this or any exercise program, consult your physician. This
is especially important for persons over the age of 35 or persons with pre-existing health problems.
Read all instructions before using this product. ICON assumes no responsibility for personal injury
or property damage sustained by or through the use of this product.
2
BEFORE YOU BEGIN
Thank you for selecting the new WESLO®AEROBICSTRIDE 2.0 treadmill. The AEROBICSTRIDE 2.0
treadmill is designed to let you enjoy effective cardiovascular workouts in the comfort and convenience of
your home. And when the AEROBICSTRIDE 2.0
readmill is not in use, it can be folded up, requiring
t
less than half the space of other treadmills.
For your benefit, read this manual carefully before
using the treadmill
ing this manual, please see the front cover of this
manual. To help us assist you, note the product model
Console
Handrail
. If you have questions after read-
number and serial number before calling. The model
number of the treadmill is WLTL01906.0. The serial
number can be found on a decal attached to the treadmill (see the front cover of this manual for the location).
o avoid a registration fee for any service needed
T
under warranty, you must register the treadmill at
www.wesloservice.com/registration.
Before reading further, please review the drawing
below and familiarize yourself with the labeled parts.
Latch Pin
Walking Belt
Roller Guards
Rear Roller Bolts
Caution Decal
(one on each side)
Frame Pin
Warning Decal
3
ASSEMBLY
M10 Washer
(14)–10
M10 Nut (18)–10
M6 x 15mm
Screw (4)–2
M12 x 60mm Screw (11)–2
M10 x 55mm Screw (13)–4
M10 x 50mm Screw (15)–2
M12 Washer
(12)–2
Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not
dispose of the packing materials until assembly is completed.
Assembly requires the included tools and your own rubber mallet .
Use the drawings below to identify the hardware used during assembly. Note: If a part is not in the parts bag,
check to see if it has been preattached to one of the parts to be assembled. To avoid damaging plastic
parts, do not use power tools for assembly.
1. Attach the Base Crossbar (44) to the two
Upright Bases (16) with two M10 x 50mm
Screws (15) and two 10mm Washers (14) as
shown.
1
16
15
14
44
16
14
15
4
2. Identify the Left Upright (3), which has the
Upright Wire (46) inside. Orient the Left Upright
as shown, and attach it to the left Upright Base
16) with two M10 x 55mm Screws (13), four
(
M10 Washers (14), and two M10 Nuts (18).
not tighten the Nuts yet.
Attach the Right Upright (9) to the right Upright
Base (16) in the same way. Do not tighten the
Nuts yet.
Do
2
46
3
13
13
14
14
14
18
13
14
9
13
14
3. Slide the ends of the Handrail (5) into the tubes
on the Left and Right Uprights (3, 9). If necessary, use a rubber mallet to fully insert the
Handrail. Attach the Handrail with two M6 x
15mm Screws (4).
Connect the Upright Wire (46) to the Handrail
Wire (49).
16
16
3
4
49
5
46
3
4
14
18
9
5