Weslo WLMC003410 Owner's Manual
™
Model No. WLMC003410
Serial No.
Serial Number Decal
QUESTIONS?
As a manufacturer, we are committed to providing complete
customer satisfaction. If you
have questions, or find or that
there are missing or damaged
parts, we will guarantee complete satisfaction through direct
assistance from our factory.
PATENT PENDING
TO AVOID UNNECESSARY
DELAYS, PLEASE CALL DIRECT
TO OUR TOLL-FREE CUSTOMER
HOT LINE. The trained technicians on our Customer Hot Line
will provide immediate assistance, free of charge to you.
CUSTOMER HOT LINE:
1-800-999-3756
Mon.-Fri., 6 a.m.-6 p.m. MST
CAUTION:
Read all safety precautions
and instructions in this manual carefully before using
this equipment. Save this manual
for future reference.
USER'S MANUAL
TABLE OF CONTENTS
IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
DJUSTMENT AND OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
A
MAINTENANCE AND TROUBLE-SHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
CONDITIONING GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
PART LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
EXPLODED DRAWING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
ORDERING REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover
WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover
2
IMPORTANT PRECAUTIONS
WARNING: To reduce the risk of serious injury, read the following important precautions before
using the WESLO®CARDIO GLIDE.
1. It is the responsibility of the owner to ensure
that all users of the CARDIO GLIDE are adequately informed of all warnings and precautions.
2. Use the CARDIO GLIDE only on a level surface.
3. Wear appropriate clothing when exercising;
do not wear loose clothing that could
become caught in the CARDIO GLIDE.
Always wear athletic shoes for foot protection.
4. The CARDIO GLIDE features a precision
resistance cylinder; due to the nature of
resistance cylinders, it is recommended that
the floor underneath the CARDIO GLIDE be
covered in case of slight oil leakage.
5. Keep small children and pets away from the
CARDIO GLIDE at all times.
6. The resistance cylinder becomes very hot
during use. Allow the resistance cylinder to
cool before touching it. When adjusting the
resistance, touch only the resistance adjustment collar.
7. Do not use the CARDIO GLIDE when the
resistance cylinder is below room temperature or damage may occur.
8. The CARDIO GLIDE should not be used by
persons weighing more than 250 pounds
(113 kg). Never allow more than one person
at a time on the CARDIO GLIDE.
9. Inspect and tighten all part regularly.
Replace any worn parts immediately.
10. Use the CARDIO GLIDE only as described in
this manual.
11. The CARDIO GLIDE is intended for home
use only. Do not use the CARDIO GLIDE in
any commercial, rental, or institutional setting.
WARNING: Before beginning this or any exercise program, consult your physician. This is especially important for persons over the age of 35 or persons with pre-existing health problems. Read all
instructions before using. ICON assumes no responsibility for personal injury or property damage
sustained by or through the use of this product.
The decal shown at the right has been placed on the
resistance cylinder of your CARDIO GLIDE.
If the decal is missing, or if it is not legible, please call
our Customer Service Department, toll-free, to order a
free replacement decal (see ORDERING REPLACEMENT PARTS on the back cover of this manual).
Apply the decal in the location shown at the right.
3
ASSEMBLY
Place all parts of the CARDIO GLIDE in a cleared area and remove the packing materials. Do not dispose of the
packing materials until assembly is completed. Read each step carefully before beginning.
ssembly requires the following tools: one phillips screwdriver , one adjustable wrench
A
, and one rubber mallet .
1. Tap a 1/2” Bushing (25) into each side of the Frame
(6) as shown.
Apply grease to the Pivot Rod (21). Align the holes in
the Pedal Frame (7) with the indicated tube on the
Frame (6). Tap the Pivot Rod through the Pedal
Frame and the Frame.
IMPORTANT NOTE: Before assembling the 1/2”
Dome Caps (29), make sure that you thoroughly
understand the assembly step(s) they are used in.
They can be assembled only once. If they must be
removed, you will need to order new Dome Caps.
Center the Pivot Rod (21) and tap a 1/2” Dome Cap
(29) onto each end of it.
Make sure that the Magnet (27) is on the Pedal
Frame (7).
2. Make sure that there is a 1/2” Link Arm Bushing (19)
in the right Link Arm (4) (see the inset drawing). Slide
the Link Arm onto the indicated pin on the Pedal
Frame (7). Pivot the Pedal Frame and tap a 1/2”
Dome Cap (29) onto the pin.
6
Apply
Grease
21
7
29
1
29
25
27
2
4
19
7
29
4
Attach the left Link Arm (not shown) in the same manner.
19
3. Make sure that there is a 1 1/4” x 2” Endcap (13) on
each end of the Handlebar (2). The Endcaps must be
turned so the round holes are on top.
Slide the Handlebar (2) into the Pedal Frame (7). The
Handlebar must be turned so the sides bend toward
the seat (not shown). Align the holes in the Handlebar
with the holes in the Pedal Frame. Attach one side of
the Handlebar with two #8 x 1/2” Screws (16). Attach
the other side of the Handlebar with two #8 x 1/2”
Screws.
Slide the 1 1/4” x 2” Endcaps (13) down over the
Pedal Frame (7).
4
3
13
2
7
Pin
16
Loading...