Weslo WLEX1776.0 Owner's Manual

CAUTION
Read all precautions and instruc­tions in this manual before using this equipment. Keep this manual for future reference.
Serial Number
Decal
Model No. WLEX1776.0 Serial No.
USER’S MANUAL
QUESTIONS?
As a manufacturer, we are com­mitted to providing complete customer satisfaction. If you have questions, or if a part is damaged or missing, PLEASE CONTACT OUR CUSTOMER SERVICE DEPARTMENT DIRECTLY.
CALL TOLL-FREE:
1-866-699-3756
Mon.–Fri., 6 a.m.–6 p.m. MST (closed on holidays)
ON THE WEB: www.wesloservice.com
Visit our website at
www.weslo.com
new products, prizes,
fitness tips, and much more!
2
TABLE OF CONTENTS
IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
HOW TO OPERATE THE EXERCISE CYCLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
MAINTENANCE AND TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
CONDITIONING GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
PART LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
EXPLODED DRAWING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
ORDERING REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover
LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover
1. Read all instructions in this manual and all warnings on the exercise cycle before using the exercise cycle.
2. Use the exercise cycle only as described in this manual.
3. It is the responsibility of the owner to ensure that all users of the exercise cycle are ade­quately informed of all precautions.
4. The exercise cycle is intended for home use only. Do not use the exercise cycle in a commercial, rental, or institutional setting.
5. Keep the exercise cycle indoors, away from moisture and dust. Place the exercise cycle on a level surface, with a mat beneath it to protect the floor or carpet. Make sure that there is enough clearance around the exer­cise cycle to mount, dismount, and use it.
6. Inspect and properly tighten all parts regu­larly. Replace any worn parts immediately.
7. Keep children under the age of 12 and pets away from the exercise cycle at all times.
8. Wear appropriate clothes while exercising; do not wear loose clothes that could become caught on the exercise cycle. Always wear athletic shoes for foot protection.
9. The exercise cycle should not be used by persons weighing more than 250 lbs. (113 kg).
10. The pulse sensor is not a medical device. Various factors may affect the accuracy of heart rate readings. The pulse sensor is intended only as an exercise aid in determin­ing heart rate trends in general.
11. Always keep your back straight while using the exercise cycle; do not arch your back.
12. If you feel pain or dizziness at any time while exercising, stop immediately and cool down.
13. The warning decal shown on page 3 has been placed on the exercise cycle. If the decal is missing or illegible, call the toll-free tele­phone number on the front cover of this man­ual and request a free replacement decal. Apply the decal in the location shown.
WARNING: Before beginning this or any exercise program, consult your physician. This
is especially important for persons over the age of 35 or persons with pre-existing health problems. Read all instructions before using. ICON assumes no responsibility for personal injury or property damage sustained by or through the use of this product.
IMPORTANT PRECAUTIONS
WARNING:
To reduce the risk of serious injury, read the following important precau-
tions before using the exercise cycle.
3
Congratulations on selecting the new WESLO
®
PURSUIT 4.0 exercise cycle. Cycling is one of the most effective exercises for increasing cardiovascular fitness, building endurance, and toning the body. The PURSUIT 4.0 exercise cycle offers several features designed to help you enjoy this healthful exercise in the convenience and privacy of your home.
For your benefit, read this manual carefully before you use the exercise cycle. If you have questions
after reading this manual, please see the front cover of this manual. To help us assist you, note the product
model number and serial number before contacting us. The model number is WLEX1776.0. The serial number can be found on a decal attached to the exercise cycle (see the front cover of this manual for the location of the decal).
To avoid a registration fee for any service needed under warranty, you must register the exercise cycle at www.wesloservice.com/registration.
Before reading further, please familiarize yourself with the parts that are labeled in the drawing below.
REAR
FRONT
Seat Knob Pedal/Strap
Console
Handlebar
RIGHT SIDE
BEFORE YOU BEGIN
Seat
Handgrip Pulse Sensor
4
ASSEMBLY
To hire an authorized service technician to assemble the exercise cycle, call toll-free 1-800-445-2480.
Assembly requires two persons. Place all parts of the exercise cycle in a cleared area and remove the packing
materials. Do not dispose of the packing materials until assembly is completed.
Assembly requires the included tools and your own adjustable wrench and Phillips screwdriver .
As you assemble the exercise cycle, use the drawings below to identify small parts. The number in parentheses below each drawing is the key number of the part, from the PART LIST on page 14. The number following the parentheses is the quantity needed for assembly. Note: Some small parts shown in the assembly steps may
be preassembled. If a part is not in the parts bag, check to see if it is preassembled.
1. While another person lifts the rear of the Frame (1), attach the Rear Stabilizer (7) to the Frame with two M10 x 70mm Carriage Bolts (16), two M10 x 1.5mm Washers (54), and two M10 Nylon Locknuts (44). Next, press two Acorn Covers (35) onto the Nylon Locknuts.
1
44
44
16
35
35
16
7
54
54
1
M8 Curved
Washer (50)–4
M10 Nylon Locknut
(44)–4
M8 x 1.2mm
Washer (53)–3
Acorn Cover
(35)–4
M10 x 70mm Carriage Bolt (16)–4
M10 x 1.5mm
Washer (54)–4
M6 x 12mm Button
Screw (52)–4
M8 Nylon
Locknut (46)–3
M8 x 15mm Button
Screw (51)–4
5
3. Attach the Seat (4) to the Seat Post (34) with three M8 x 1.2mm Washers (53) and three M8 Nylon Locknuts (46). Note: The Washers and Nylon Locknuts may be preattached to the underside of the Seat.
Remove the Seat Knob (20) by turning it counterclock­wise. Next, insert the Seat Post (34) into the Frame (1). Align one of the adjustment holes in the Seat Post with the indicated hole in the Frame. Insert the Seat Knob into the Frame and the Seat Post, and turn the Seat Knob clockwise until it is tight. Make sure that the
Seat Knob is inserted into one of the adjustment holes in the Seat Post.
46
4
53
46
20
Hole
1
34
53
3
2. While another person lifts the front of the Frame (1), attach the Front Stabilizer (6) with two M10 x 70mm Carriage Bolts (16), two M10 x 1.5mm Washers (54), and two M10 Nylon Locknuts (44). Next, press two Acorn Covers (35) onto the Nylon Locknuts.
54
54
1
35
35
6
2
16
44
44
Loading...
+ 11 hidden pages