Weslo WLEX0996.0 Owner's Manual

Model No. WLEX0996.0
Serial No.

QUESTIONS?

As a manufacturer, we are com­mitted to providing complete
customer satisfaction. If you
have questions, or if a part is
damaged or missing, PLEASE
CONTACT OUR CUSTOMER
SERVICE DEPARTMENT
DIRECTLY.

CALL TOLL-FREE:

1-866-699-3756

Mon.–Fri., 6 a.m.–6 p.m. MST
(closed on holidays)

ON THE WEB:
www.wesloservice.com

CAUTION

Read all precautions and instruc­tions in this manual before using
this equipment. Keep this manu­al for future reference.

USER’S MANUAL

Serial Number

Decal

Visit our website at

www.weslo.com

new products, prizes,

fitness tips, and much more!

2

TABLE OF CONTENTS

IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

HOW TO USE THE EXERCISE CYCLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

MAINTENANCE AND TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

CONDITIONING GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

PART LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

EXPLODED DRAWING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

HOW TO ORDER REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover

LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover

IMPORTANT PRECAUTIONS

WARNING:

To reduce the risk of serious injury, read the following important precau-

tions before using the exercise cycle.

1. Read all instructions in this manual before
using the exercise cycle. Use the exercise
cycle only as described in this manual.

2. It is the responsibility of the owner to ensure
that all users of the exercise cycle are ade­quately informed of all precautions.

3. The exercise cycle is intended for in-home
use only. Do not use the exercise cycle in a
commercial, rental, or institutional setting.

4. Keep the exercise cycle indoors, away from
moisture and dust. Place the exercise cycle
on a level surface, with a mat beneath it to
protect the floor or carpet. Make sure that
there is enough clearance around the exer­cise cycle to mount, dismount, and use it. .

5. Inspect and tighten all parts regularly.
Replace any worn parts immediately.

6. Keep children under the age of 12 and pets
away from the exercise cycle at all times.

7. The exercise cycle should not be used by
persons weighing more than 250 pounds.

8. Wear appropriate clothing when exercising; do
not wear loose clothing that could become
caught on the exercise cycle. Always wear
athletic shoes for foot protection.

9. When adjusting the seat, insert the seat pin
into one of the holes in the seat post (see the
drawing on page 5). Do not insert the seat
knob under the seat post.

10. Always keep your back straight when using
the exercise cycle; do not arch your back.

11. If you feel pain or dizziness while exercising,
stop immediately and begin cooling down.

12. The exercise cycle does not have a free
wheel; the pedals and the handlebars will
continue to move until the flywheel stops.

13. The decal shown on page 3 has been placed
on the exercise cycle. If the decal is missing
or illegible, call the toll-free telephone num­ber on the front cover of this manual and
order a free replacement decal. Apply the
decal in the location shown.

WARNING: Before beginning this or any exercise program, consult your physician.

This is especially important for persons over the age of 35 or persons with pre-existing health
problems. Read all instructions before using. ICON assumes no responsibility for personal injury
or property damage sustained by or through the use of this product.

3

BEFORE YOU BEGIN

Handlebars

Resistance Knob

FRONT

Flywheel

BACK

LEFT SIDE

Seat

Seat Post

Pedal

Side Shield

Seat Pin

Console

Thank you for selecting the new WESLO PURSUIT

®

E 25 exercise cycle. The PURSUIT E 25 exercise
cycle blends advanced engineering with contemporary
styling to provide you with effective, low-impact work­outs in the convenience and privacy of your home.

For your benefit, read this manual carefully before
you use the exercise cycle. If you have questions

after reading this manual, please see the front cover
of this manual. To help us assist you, note the product
model number and serial number before contacting us.

The model number is WLEX0996.0. The serial num­ber can be found on a decal attached to the exercise
cycle (see the front cover of this manual for the loca­tion of the decal).

To avoid a registration fee for any service needed
under warranty, you must register the exercise
cycle at www.wesloservice.com/registration.

Before reading further, please look at the drawing
below and familiarize yourself with the labeled parts.

ASSEMBLY

Place all parts of the exercise cycle in a cleared area and remove the packing materials. Do not dispose of the
packing materials until assembly is completed. Assembly requires a phillips screwdriver

and an adjustable wrench . A small amount of liquid soap is also required.

4

2

5

14

1

9

18

Square

Holes

2

Slot

1

32

2. Align the Front Stabilizer (5) with the saddle bracket

on the front of the Frame (1). Make sure that the

Front Stabilizer is turned so the square holes
are facing away from the Frame. Attach the Front

Stabilizer with two M8 x 40mm Carriage Bolts (18),
two M8 Curved Washers (14), and two M8 Nylon
Locknuts (9).

3

40

1

32

Hole

38

9

41

55

55

42

42

3

50

1. Refer to the inset drawing. Remove the Shipping
Insert (54) from the Frame (1) and discard it.

Turn the Rear Stabilizer (2) so that the slot faces
downward, and insert the Rear Stabilizer into the
Frame (1). Attach the Rear Stabilizer with four M5 x
10mm Machine Screws (32).

3. Remove all parts from the Pivot Axle (3). Insert the
Pivot Axle into the Frame (1). Align the hole in the
center of the Pivot Axle with the hole in the center of
the Frame. Tighten an M5 x 10mm Machine
Screw (32) into the Frame and the Pivot Axle.

Slide the Left and Right Handlebars (40, 41) onto
the ends of the Pivot Axle (3). Slide an M8 Flat
Washer (38) onto each end of the Pivot Axle, and
then thread an M8 Nylon Locknut (9) onto each end
of the Pivot Axle. Tighten each Nylon Locknut until
at least two threads on the end of the Pivot Axle
extend past the Nylon Locknut. Make sure that the
Handlebars move freely.

Press a Pivot Endcap (50) onto each end of the
Pivot Axle (3).

Apply a small amount of liquid soap to the upper
end of each Handlebar (40, 41). Slide a Foam Grip
(42) onto each Handlebar. Make sure that there is
a Handlebar Endcap (55) in each Handlebar.

1

1

54

9

38

50