Weslo WLEVEX29840 Owner's Manual

Model No. WLEVEX29840
Serial No.

Serial

Number

Decal

QUESTIONS?

As a manufacturer, we are com­mitted to providing complete
customer satisfaction. If you
have questions, or if there are
missing or damaged parts,
please call:

0034 91 661 02 10

USER'S MANUAL

Fax: [phone]

E-mail: serviciotecni­[e-mail]

CAUTION

Read all precautions and instruc­tions in this manual before using
this equipment. Keep this manual
for future reference.

TABLE OF CONTENTS

IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

EFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

B

ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

HOW TO OPERATE THE EXERCISE CYCLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

MAINTENANCE AND TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

ONDITIONING GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

C

PART LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

EXPLODED DRAWING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

ORDERING REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover

IMPORTANT PRECAUTIONS

WARNING: To reduce the risk of serious injury, read the following important precau-

tions before using the exercise cycle.

1. Read all instructions in this manual before
using the exercise cycle. Use the exercise
cycle only as described in this manual.

2. It is the responsibility of the owner to ensure
that all users of the exercise cycle are ade­quately informed of all precautions.

3. Place the exercise cycle on a level surface,
with a mat beneath it to protect the floor or
carpet. Keep the exercise cycle indoors, away
from moisture and dust.

4. Inspect and properly tighten all parts regular­ly. Replace any worn parts immediately.

5. Keep children under the age of 12 and pets
away from the exercise cycle at all times.

6. Wear appropriate clothing when exercising;
do not wear loose clothing that could become
caught on the exercise cycle. Always wear
athletic shoes for foot protection.

7. The exercise cycle should not be used by
persons weighing more than 115 kg (250 lbs.).

8. Always keep your back straight whilst using
the exercise cycle; do not arch your back.

9. If you feel pain or dizziness whilst exercising,
stop immediately and cool down.

10 The pulse sensor is not a medical device.

Various factors, including the user's move­ment, may affect the accuracy of heart rate
readings. The pulse sensor is intended only
as an exercise aid in determining heart rate
trends in general.

11. The exercise cycle is intended for home use
only. Do not use the exercise cycle in
a commercial, rental, or institutional setting.

12. A warning decal has been placed on the exer­cise cycle in the location shown on page 3.
Note that the text on the decal is in Spanish.
Find the decal in English and place it on the
exercise cycle so that it covers the Spanish
decal. If the decal is missing, or if it is not
legible, please call our Customer Service
Department and order a free replacement
decal (see the back cover of this manual).
Apply the decal in the location shown.

WARNING: Before beginning this or any exercise program, consult your physician. This

is especially important for persons over the age of 35 or persons with pre-existing health problems.
Read all instructions before using. ICON assumes no responsibility for personal injury or property
damage sustained by or through the use of this product.

2

BEFORE YOU BEGIN

ongratulations for selecting the new BOOMERANG

C
403 exercise cycle. Cycling is one of the most effec­tive exercises for increasing cardiovascular fitness,
building endurance, and toning the body. The

OOMERANG 403 exercise cycle offers a selection of

B
features designed to let you enjoy this healthful exer­cise in the convenience and privacy of your home.

For your benefit, read this manual carefully before
you use the exercise cycle. If you have questions

Water Bottle Holder*

Console

Resistance Knob

Adjustment Handle

fter reading this manual, please call our Customer

a
Service Department at 0034 91 661 02 10. To help us
assist you, please note the product model number
and serial number before calling. The model number

s WLEVEX29840. The serial number can be found on

i
a decal attached to the exercise cycle (see the front
cover of this manual for the location of the decal).

Before reading further, please familiarise yourself with
the parts that are labelled in the drawing below.

Handlebar

Seat

Seat Knob

Adjustment Knobs

Wheel

Pedal/Strap

*No water bottle is included

3

ASSEMBLY

M8 Nylon

Locknut (10)–7

M8 Flat

Washer (51)–3

Earth Screw

(27)–1

M5 x 12mm

Screw (49)–4

M8 x 51mm Carriage Bolt (30)–4

Assembly requires two persons. Place all parts of the exercise cycle in a cleared area and remove the packing
materials. Do not dispose of the packing materials until assembly is completed.

Assembly requires the included tools and your own adjustable spanner , Phillips screw­driver , and pliers .

As you assemble the exercise cycle, use the part drawings below to identify small parts. The number in paren­thesis below each drawing is the key number of the part, from the PART LIST on page 14. The number after the
key number is the quantity used in assembly. Note: Some small parts may have been preassembled for ship-

ping. If a part is not in the parts bag, check to see if it has been pre-assembled.

1. Orient the Front Stabiliser (2) so the Wheels (23) are on
the side shown. Whilst another person lifts the front of
the Frame (1) slightly, attach the Front Stabiliser with
two M8 x 51mm Carriage Bolts (30) and two M8 Nylon
Locknuts (10).

2. Whilst another person lifts the rear of the Frame (1)
slightly, attach the Rear Stabiliser (6) with two M8 x
51mm Carriage Bolts (30) and two M8 Nylon Locknuts
(10).

1

23

2

23

30

10

1

2

30

1

6

10

4

3. Slide the two slots in the Handlebar Clamp (42) onto the
two indicated tabs on the Upright (13). Lift the bottom of
the Handlebar Clamp away from the Upright, and insert

he Handlebar (15) between the Handlebar Clamp and

t
the Upright. Centre the Handlebar and rotate it to the

esired position.

d

Insert the Adjustment Handle (53) into the Handlebar
Clamp (42) and tighten the Adjustment Handle into the
Upright (13). Note: The Adjustment Handle works like a
spanner. Turn the Handle clockwise, pull it away from
the Upright, turn it counterclockwise, push it toward the
upright, and then turn it clockwise again.

3

15

Tabs

42

13

53

4. The Console (16) requires three “AA” batteries; alka­line batteries are recommended. Insert three batteries
into the Console. Make sure that the batteries are

oriented as shown by the diagram inside the
Console.

5. Hold the Console (16) near the Upright (13). Insert the
console cable and the console wire into the indicated
hole and down through the Upright. Attach the earth
wire to the Upright with the Earth Screw (27).

Insert the excess cable and wire into the Upright (13).
Attach the Console (16) to the Upright with four M5 x
12mm Screws (49). Be careful to avoid pinching the

wires.

4

Batteries

16

5

Earth

Wire

27

49

16

Hole

Console

49

Console

Wire

Cable

13

Be careful to

avoid pinching

the wires.

5