Model No. WLEVEL28840
Serial No.
Serial Number
Decal
QUESTIONS?
As a manufacturer, we are committed to providing complete customer satisfaction. If you have
questions, or if there are missing
or damaged parts, please call:
0034 91 661 02 10
Fax: 0034 91 661 98 32
E-mail: serviciotecnico@bahnli.com
CAUTION
Read all precautions and instructions in this manual before using
this equipment. Keep this manual for future reference.
USERʼS MANUAL
TABLE OF CONTENTS
IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
HOW TO USE THE ELLIPTICAL CROSSTRAINER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
MAINTENANCE AND TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
CONDITIONING GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
PART LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
EXPLODED DRAWING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
HOW TO ORDER REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover
2
IMPORTANT PRECAUTIONS
WARNING: To reduce the risk of serious injury, read the following important precau-
tions before using the elliptical crosstrainer.
1. Read all instructions in this manual before
using the elliptical crosstrainer. Use the
elliptical crosstrainer only as described.
2. It is the responsibility of the owner to
ensure that all users of the elliptical
crosstrainer are adequately informed of all
precautions.
3. Place the elliptical crosstrainer on a level
surface, with a mat beneath it to protect the
floor or carpet. Keep the elliptical crosstrainer indoors, away from moisture and dust.
4. Inspect and properly tighten all parts regularly. Replace any worn parts immediately.
5. Keep children under 12 and pets away from
the elliptical crosstrainer at all times.
6. The elliptical crosstrainer should not be
used by persons weighing more than 115 kg
(250 lbs.).
7. Wear appropriate exercise clothing when
using the elliptical crosstrainer. Always wear
athletic shoes for foot protection.
11. If you feel pain or dizziness at any time whilst
exercising, stop immediately and cool down.
12. When you stop exercising, allow the pedals
to slowly come to a stop.
13. The elliptical crosstrainer is intended for
home use only. Do not use the elliptical
crosstrainer in a commercial, rental, or institutional setting.
14. A warning decal has been placed on the
elliptical crosstrainer in the location shown
below. Please note that the text on the decal
is in Spanish. Find the decal in English and
place it over the Spanish decal.
If the decal is missing, or if it is not legible,
please please call our Customer Service
Department and order a free replacement
decal (see the back cover of this manual).
Apply the decal in the location shown.
8. Always hold the handlebars when mounting,
dismounting, or using the elliptical
crosstrainer.
9. Keep your back straight when using the
elliptical crosstrainer. Do not arch your
back.
10. The pulse sensor is not a medical device.
Various factors may affect the accuracy of
heart rate readings. The pulse sensor is
intended only as an exercise aid in determining heart rate trends in general.
WARNING: Before beginning this or any exercise program, consult your physician.
This is especially important for persons over the age of 35 or persons with pre-existing health problems. Read all instructions before using. ICON assumes no responsibility for personal injury or
property damage sustained by or through the use of this product.
3
BEFORE YOU BEGIN
Congratulations for selecting the new BOOMERANG
50 elliptical crosstrainer. The BOOMERANG 850
8
elliptical crosstrainer is an incredibly smooth exerciser
that moves your feet in a natural elliptical path, minimizing the impact on your knees and ankles. And the
unique BOOMERANG 850 features adjustable resistance and a simple-to-use console to help you get the
most from your exercise.
For your benefit, read this manual carefully before
using the elliptical crosstrainer. If you have ques-
Handlebar
Pulse Sensor
tions after reading this manual, please call our
ustomer Service Department at 0034 91 661 02 10.
C
To help us assist you, please note the product model
number and serial number before calling. The model
number is WLEVEL28840. The serial number is found
on a decal attached to the elliptical crosstrainer (see
the front cover of this manual for the location of the
decal).
Before reading further, please familiarise yourself with
the parts that are labeled in the drawing below.
Water Bottle Holder*
Console
Resistance Knob
BACK
Pedal Disk
FRONT
Pedal Arm
Wheel
Pedal
*No water bottle is included
4
ASSEMBLY
M8
Washer (48)–4
M8 Split
Washer (59)–6
M8 Nylon
Locknut (38)–8
M10
Washer (35)–2
M4 x 16mm
Screw (42)–5
M10 x 25mm
Patch Screw (22)–2
M6 x 48mm Flat Head
Screw (36)–4
Pedal Arm Bolt Set (40)–2
M8 x 38mm Button Bolt (50)–4
M8 x 25mm Button
Screw (45)–1
M8 x 19mm Button
Screw (68)–6
M8 x 53mm Button Bolt (34)–4
Assembly requires two persons. Place all parts of the elliptical crosstrainer in a cleared area and remove the
packing materials. Do not dispose of the packing materials until assembly is completed. In addition to the
included hex keys, assembly requires a phillips screwdriver , an adjustable
panner , and a rubber mallet .
s
As you assemble the elliptical crosstrainer, use the drawings below to identify the small parts used in assembly.
The number in parenthesis below each drawing refers to the key number of the part, from the PART LIST on
page 14. The second number refers to the quantity used in assembly. Note: Some small parts may have been
pre-assembled for shipping. If a part is not in the parts bag, check to see if it has been pre-assembled.
1. Identify the Front Stabiliser (10), which is narrower than
the Rear Stabiliser (not shown). Whilst another person
lifts the front of the Frame (1), attach the Front
Stabiliser to the Frame with two M8 x 53mm Button
Bolts (34), two M8 Washers (48), and two M8 Nylon
Locknuts (38).
1
34
10
5
1
48
48
38