Weslo WLCCEX69871 User Manual
USER'S MANUAL
CAUTION
Read all precautions and instructions in this manual before using
this equipment. Keep this manual
for future reference.
Serial
Number
Decal
Model No. WLCCEX69871
Serial No.
Write the serial number in the space
above for future reference.
QUESTIONS?
As a manufacturer, we are committed to providing complete
customer satisfaction. If you
have questions, or find that there
are missing or damaged parts,
we will guarantee complete satisfaction through direct assistance from our factory.
TO AVOID UNNECESSARY
DELAYS, PLEASE CALL DIRECT
TO OUR TOLL-FREE CUSTOMER HOT LINE. The trained
technicians on our customer hot
line will provide immediate
assistance, free of charge to
you.
CUSTOMER HOT LINE:
1-888-936-4266
Mon.–Fri., 8h00–18h00 EST
VISIT OUR WEBSITE: www.weslo.com
2
TABLE OF CONTENTS
IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
PART IDENTIFICATION CHART . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
HOW TO USE THE PURSUIT 895i . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
CONDITIONING GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
MAINTENANCE AND TROUBLE-SHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
PART LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
EXPLODED DRAWING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
ORDERING REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
CUSTOMER RECORD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
3
IMPORTANT PRECAUTIONS
WARNING: To reduce the risk of serious injury, read the following important precautions before
using the exercise cycle.
1. Read all instructions in this manual before
using the exercise cycle. Use the exercise
cycle only as described.
2. It is the responsibility of the owner to ensure
that all users of the exercise cycle are adequately informed of all precautions.
3. Use the exercise cycle indoors, away from
moisture and dust. Place the exercise cycle
on a level surface, with a mat beneath it to
protect the floor or carpet from damage.
4. Inspect and tighten all parts regularly.
Replace any worn parts immediately.
5. Keep children under the age of 12 and pets
away from the exercise cycle at all times.
6. The exercise cycle should not be used by
persons weighing more than 250 pounds
(115 kg).
7. Wear appropriate clothing when exercising;
do not wear loose clothing that could become
caught on the exercise cycle. Always wear
athletic shoes for foot protection.
8. When adjusting the seat, insert the seat
knob through one of the holes in the seat
post (see the drawing on page 4). Do not
insert the seat knob under the seat post.
9. Always keep your back straight when using
the exercise cycle. Do not arch your back.
10.If you feel pain or dizziness at any time
whilst exercising, stop immediately and
begin cooling down.
11.The exercise cycle is intended for in-home
use only. Do not use the exercise cycle in a
commercial, rental, or institutional setting.
12.The pulse monitor is not a medical device.
Various factors, including the user's movement, may affect the accuracy of heart rate
readings. The pulse monitor is intended only
as an exercise aid in determining heart rate
trends in general.
WARNING: Before beginning this or any exercise program, consult your physician. This is especially important for persons over the age of 35 or persons with pre-existing health problems. Read
all instructions before using. ICON assumes no responsibility for personal injury or property damage sustained by or through the use of this product.
The decal shown at the right
has been placed on the exercise cycle. If the decal is missing, or if it is not legible, please
call our Customer Service
Department to order a free
replacement decal. Apply the
replacement decal in the location shown.
4
BEFORE YOU BEGIN
Thank you for selecting the new WESLO PURSUIT
®
895i exercise cycle. The PURSUIT 895i blends
advanced engineering with contemporary styling to
provide you with a low-impact workout in the convenience and privacy of your own home.
For your benefit, read this manual carefully before
you use the PURSUIT 895i. If you have additional
questions, please call our Customer Service
Department toll-free at 1-888-936-4266, Monday
through Friday, 8:00 a.m. until 6:30 p.m. Eastern Time
(excluding holidays). To help us assist you, please
mention the product model number and serial number
when calling. The model number is WLCCEX69871.
The serial number can be found on a decal attached
to the PURSUIT 895i (see the front cover of this manual for the location of the decal).
Before reading further, please look at the drawing
below and familiarize yourself with the parts that are
labelled.
Handlebars
Resistance Knob
FRONT
BACK
RIGHT SIDE
Seat Knob
Seat
Book Rack
Seat Post
Pedal
Console
Water Bottle Holder
(bottle is not included)
Front Wheels
5
PART IDENTIFICATION CHART
Use the chart below for help identifying the small
parts used in assembly. The number in parenthesis
below each part refers to the key number of the part.
The second number refers to the quantity used in
assembly. Note: Some parts may have been pre-
attached for shipping purposes. If a part is not
found in the parts bag, check to see if it has been
pre-attached.
M10 x 25mm Button Screw (8)–5
M4 x 16mm Screw (4)–5
M8 x 90mm Carriage Bolt (9)–4
M8 Split Washer (53)–4
M10 Split Washer (31)–5
M8 Nylon Locknut (21)–8
6
1. Identify the Front Stabilizer (51), which has Wheels
(25) on the ends.
Hold the Front Stabilizer (51) against the saddle on
the front of the Frame (15). Attach the Front
Stabilizer with two M8 x 90mm Carriage Bolts (9)
and two M8 Nylon Locknuts (21).
2. Make sure that there is a Stabilizer Endcap (48) on
each end of the Rear Stabilizer (52).
Hold the Rear Stabilizer (61) against the saddle on
the rear of the Frame (15). Make sure that the Rear
Stabilizer is turned so the square holes are facing
away from the saddle. Attach the Rear Stabilizer
with two M8 x 90mm Carriage Bolts (9) and two M8
Nylon Locknuts (21).
3. The Console (7) requires two “AA” batteries (not
included). Alkaline batteries are recommended.
Refer to the inset drawing. Open the battery cover
on the underside of the Console as shown. Press
two batteries into the battery compartment. Make
sure that the negative ends of the batteries
(marked “–”) are touching the springs in the
battery compartment. Close the battery cover.
Insert the console wire through the Handlebar Post
(14). Connect the console wire to the Reed Switch
Wire (54). Attach the Console (7) to the Handlebar
Post with four M4 x 16mm Screws (4).
Carefully slide the Handlebar Post (14) onto the
Frame (15). Be careful to avoid pinching the
wires inside the Handlebar Post. Attach the
Handlebar Post with three M10 x 25mm Button
Screws (8) and three M10 Split Washers (31).
Attach the Knob Housing (12) to the Handlebar Post
with an M4 x 16mm Screw (4).
ASSEMBLY
Place all parts of the PURSUIT 895i in a cleared area and remove the packing materials. Do not dispose of
the packing materials until assembly is completed.
Assembly requires the included allen wrench , a phillips screwdriver and two
adjustable wrenches .
3
2
1
51
25
25
15
9
9
21
21
21
15
14
8
4
54
7
8
8
31
31
52
48
48
15
4
12
Console
Wire
7
Batteries
Battery Cover
Loading...