Weslo WLCCEX14000 Owner's Manual
CAUTION
Read all precautions and instructions in this manual before using
this equipment. Keep this manual
for future reference.
Serial
Number
Decal
If you are MISSING PARTS or
require INFORMATION on how
to operate this product, call
1-888-936-ICON(4266)
Model No. WLCCEX14000
Serial No.
Write the serial number in the
space above for reference.
USER'S MANUAL
www.weslo.com
Visit our website at
2
TABLE OF CONTENTS
IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
HOW TO USE THE EXERCISE CYCLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
MAINTENANCE AND STORAGE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
CONDITIONING GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
PART LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
EXPLODED DRAWING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
ORDERING REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover
IMPORTANT PRECAUTIONS
WARNING:
To reduce the risk of serious injury, read the following important precau-
tions before using the WESLO®PURSUIT 719.
1. Read all instructions in this manual before
using the exercise cycle.
2. It is the responsibility of the owner to ensure
that all users of the exercise cycle are adequately informed of all precautions. Use the
exercise cycle only as described in this
manual.
3. Use the exercise cycle indoors on a level
surface. Keep the exercise cycle away from
moisture and dust. Place a mat under the
exercise cycle to protect the floor or carpet.
4. Inspect and tighten all parts regularly.
Replace any worn parts immediately.
5. Keep children under the age of 12 and pets
away from the exercise cycle at all times.
6. The exercise cycle should not be used by
persons weighing more than 115 kg (250
lbs.).
7. Wear appropriate clothing when exercising;
do not wear loose clothing that could
become caught on the exercise cycle.
Always wear athletic shoes when using the
exercise cycle.
8. Always keep your back straight when using
the exercise cycle. Do not arch your back.
9. If you feel pain or dizziness while exercising,
stop immediately and begin cooling down.
10. The pulse sensor is not a medical device.
Various factors, including the user's movement, may affect the accuracy of heart rate
readings. The pulse sensor is intended only
as an exercise aid in determining heart rate
trends in general.
11. The exercise cycle does not have a freewheel; the pedals will continue to move
until the flywheel stops.
12. The exercise cycle is intended for in-home
use only. Do not use the exercise cycles in
a commercial, rental, or institutional setting.
WARNING:Before beginning this or any exercise program, consult your physician.
This is especially important for persons over the age of 35 or persons with pre-existing health
problems. Read all instructions before using. ICON assumes no responsibility for personal injury
or property damage sustained by or through the use of this product.
WESLO is a registered trademark of ICON Health & Fitness, Inc.
3
BEFORE YOU BEGIN
Thank you for selecting the innovative WESLO
®
PURSUIT 719 exercise cycle. The PURSUIT 719
offers an effective form of low-impact exercise that
offers greater cardiovascular benefits and increased
muscle toning. And the PURSUIT 719 features
adjustable resistance to let you tailor your exercise to
the level that’s perfect for you.
For your benefit, read this manual carefully before
you use the exercise cycle. If you have additional
questions, please call our Customer Service
Department toll-free at 1-888-936-4266, Monday
through Friday, 8h00 until 18h30 Eastern Time
(excluding holidays). To help us assist you, please
mention the product model number and serial number
when calling. The model number is WLCCEX14000.
The serial number can be found on a decal attached
to the exercise cycle (see the front cover of this manual for the location of the decal).
Before reading further, please familiarize yourself with
the parts that are labeled in the drawing below.
Seat Handle
Handlebar
FRONT
Seat
Seat Upright
Wheel
Frame Knob
Seat Frame
Backrest
Pedal
Pedal
Strap
Console
Resistance Knob
Handlebar Post
BACK
RIGHT SIDE
4
ASSEMBLY
Place all parts of the exercise cycle in a cleared area and remove the packing materials. Do not dispose of the
packing materials until assembly is completed.
Assembly requires the included tools and your own adjustable wrench and phillips
screwdriver .
Use the drawings below to identify the small parts used in assembly. The number in parenthesis below
each drawing refers to the key number of the part, from the PART LIST on page 13. Note: Some small parts
may have been pre-attached for shipping. If a part is not in the parts bag, check to see if it has been preassembled.
M8 Flat
Washer (51)–8
M4 x 16mm
Screw (43)–4
M6 x 16mm
Screw (46)–8
M10 x 25mm Button
Head Screw (53)–3
M10 Split
Washer (54)–3
M8 Nylon
Locknut (55)–8
M8 x 54mm Carriage Bolt (11)–4
M8 x 65mm Carriage Bolt (52)–4
M10 x 70mm Carriage Bolt (27)–2
M10 Nylon
Locknut (26)–4
M10 x 97mm Hex Head Bolt (12)–2
5
29
1
2
2
2. Loosen the Frame Knob (29) on the right side of the
Frame (1). Slide out the Seat Frame (2) until it
stops. Tighten the Frame Knob.
1. Carefully slide the Handlebar Post (3) onto the
Frame (1) while pulling the excess Reed Switch
Wire (42) and Resistance Cable (31) up through the
Handlebar Post. Attach the Handlebar Post with
three M10 x 25mm Button Head Screws (53) and
three M10 Split Washers (54). Be careful not to
pinch the Reed Switch Wire or the Resistance
Cable.
1
3
54
54
53
53
31
42
4
3
42
31
33
32
43
43
4. Connect the Reed Switch Wire (42) to the console
wire. Next, attach the Console (33) to the Handlebar
Post (3) with four M4 x 16mm Screws (43).
Press the Resistance Knob (32) onto the Resistance
Control (31). Make sure that the mark on the
Resistance Knob is correctly aligned.
3. The Console (33) requires two “AA” batteries (not
included); alkaline batteries are recommended.
Open the battery door on the back of the Console.
Press two batteries into the Console. Make sure
that the negative (–) ends of the batteries are
touching the springs. Close the battery door.
53
3
Back of
Console
Console
Wire
Battery Door
Batteries
33
1
Loading...