Weslo WLCCEL32913.0 Owner's Manual

www.weslo.com
Model No. WLCCEL32913.0 Serial No.
Serial Number Decal
(under frame)
ACTIVATE YOUR WARRANTY
USER’S MANUAL
To register your product and activate your warranty today, contact Customer Service.
CUSTOMER SERVICE
Call toll-free 1-888-936-4266 Mon.–Fri. 7:30 a.m.–4:30 p.m. ET (excluding holidays)
or email us at customerservice@iconcanada.ca
Please do not contact the store.
CAUTION
Read all precautions and instruc­tions in this manual before using this equipment. Keep this manual for future reference.
TABLE OF CONTENTS
258868 258869 258870 258871 258872
WARNING DECAL PLACEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
IMPORTANT PRECAUTIONS ..................................................................3
BEFORE YOU BEGIN. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
PART IDENTIFICATION CHART. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
HOW TO USE THE ELLIPTICAL ..............................................................14
MAINTENANCE AND TROUBLESHOOTING ....................................................18
EXERCISE GUIDELINES ....................................................................19
PART LIST. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
EXPLODED DRAWING. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
ORDERING REPLACEMENT PARTS .................................................. Back Cover
LIMITED WARRANTY. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Back Cover
WARNING DECAL PLACEMENT
This drawing shows the location(s) of the warning decal(s).
If a decal is missing or illegible, see the front cover of this manual and request a free replacement decal. Apply the decal in the location shown. Note: The
decal(s) may not be shown at actual size.
WESLO is a registered trademark of ICON IP, Inc.
2
IMPORTANT PRECAUTIONS
WARNING: To reduce the risk of serious injury, read all important precautions and
instructions in this manual and all warnings on the elliptical before using the elliptical. ICON assumes no responsibility for personal injury or property damage sustained by or through the use of this product.
1. It is the responsibility of the owner to ensure that all users of the elliptical are adequately informed of all precautions.
2. Before beginning any exercise program, consult your physician. This is especially important for persons over age 35 or per­sons with pre-existing health problems.
3. Use the elliptical only as described in this manual.
4. The elliptical is intended for home use only. Do not use the elliptical in a commercial, rental, or institutional setting.
5. Keep the elliptical indoors, away from mois­ture and dust. Do not put the elliptical in a garage or covered patio, or near water.
6. Place the elliptical on a level surface, with at least 3 ft. (0.9 m) of clearance in the front and rear of the elliptical and 2 ft. (0.6 m) on each side. To protect the floor or carpet from dam­age, place a mat under the elliptical.
7. Inspect and properly tighten all parts regu­larly. Replace any worn parts immediately.
8. Keep children under age 12 and pets away from the elliptical at all times.
9. The elliptical should not be used by persons weighing more than 250 lbs. (113 kg).
10. Wear appropriate clothes while exercising; do not wear loose clothes that could become caught on the elliptical. Always wear athletic shoes for foot protection while exercising.
11. Hold the handlebars or the upper body arms when mounting, dismounting, or using the elliptical.
12. The heart rate monitor is not a medical device. Various factors may affect the accu­racy of heart rate readings. The heart rate monitor is intended only as an exercise aid in determining heart rate trends in general.
13. The elliptical does not have a freewheel; the pedals will continue to move until the fly­wheel stops. Reduce your pedaling speed in a controlled way.
14. Keep your back straight while using the ellip­tical; do not arch your back.
15. Over exercising may result in serious injury or death. If you feel faint or if you experience pain while exercising, stop immediately and cool down.
16. This Class [B] digital apparatus complies with Canadian ICES-003.
17. Dispose of batteries in accordance with all local codes and ordinances.
3
Your new tness equipment represents a signicant investment in your health. Protect your investment now from unexpected mechanical or electrical failures for up to ve years.
PLAN FEATURES
Protection for one to ve years
Over 100 authorized repair centers
Highly trained repair technicians
A national toll-free repair hotline
Simple repair claim procedure
No claim forms
Easy enrollment
Fast, ecient repair anywhere in Canada
In-home repairs covered
Parts and labour covered
Mechanical and electrical failures covered
To protect your tness equipment today, please
call Customer Care at
1-888-936-4266
Or, email us at customerservice@iconcanada.ca
4
BEFORE YOU BEGIN
Thank you for selecting the new WESLO MOMENTUM CT 6.2 elliptical. The MOMENTUM CT
6.2 elliptical provides a selection of features designed to make your workouts at home more effective and enjoyable.
For your benefit, read this manual carefully before you use the elliptical. If you have questions after
Length: 6 ft. (183 cm) Width: 1 ft. 11 in. (58 cm)
Console
®
reading this manual, please see the front cover of this manual. To help us assist you, note the product model number and serial number before contacting us. The model number and the location of the serial number decal are shown on the front cover of this manual.
Before reading further, please familiarize yourself with the parts that are labeled in the drawing below.
Upper Body Arm
Heart Rate Monitor
Handlebar
Pedal Disc
Wheel
Pedal
Leveling Dial
5
PART IDENTIFICATION CHART
Use the drawings below to identify the small parts needed for assembly. The number in parentheses below each drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the key number is the quantity needed for assembly. Note: If a part is not in the hardware kit, check to see if it
has been preassembled.
M8 Locknut
(27)–6
M3 x 20mm
Screw (79)–4
M8 x 20mm
Screw (7)–3
M10 Locknut
(32)–6
M4 x 16mm
Screw (2)–4
M8 x 36mm
Bolt (22)–4
M8 x 82mm
Screw (53)–4
M8 Split
Washer (8)–10
M4 x 20mm Self-tapping
Screw (45)–2
M8 Washer
(71)–10
M4 x 20mm
Screw (93)–6
M8 x 78mm Bolt (38)–2
M10 x 45mm
Bolt (39)–4
M10 Washer
(10)–6
M8 x 16mm
Screw (35)–4
M10 x 76mm
Bolt (30)–2
6
ASSEMBLY
• Assembly requires two persons.
• Place all parts in a cleared area and remove the
packing materials. Do not dispose of the packing
materialsuntilyounishallassemblysteps.
• Left parts are marked “L” or “Left” and right parts
are marked “R” or “Right.”
• To identify small parts, see page 6.
1. Call or email Customer Service (see the front
cover of this manual) today and register your product.
• activatesyourwarranty
• savesyoutimeifyoueverneedtocontact
Customer Service
• allowsustonotifyyouofupgradesandoffers
• In addition to the included tool(s), assembly
requires the following tools:
one adjustable wrench
one Phillips screwdriver
one rubber mallet
Assembly may be easier if you have a set of wrenches. To avoid damaging parts, do not use power tools.
1
2. Identify the Rear Stabilizer (52), which does not have wheels.
Set a sturdy piece of packing material under the
rear of the Frame (54). Have a second person
hold the Frame to prevent it from tipping while you complete this step.
Attach the Rear Stabilizer (52) to the Frame (54)
with two M8 x 82mm Screws (53), two M8 Split Washers (8), and two M8 Washers (71).
Remove the packing material.
2
52
54
Leveling
Dial
53
71
8
7
3. If there is a cardboard tube (not shown) on the front the Frame (54), remove and discard the attachment screw and the cardboard tube.
3
Set a sturdy piece of packing material under the
front of the Frame (54). Have a second person
hold the Frame to prevent it from tipping while you complete this step.
Attach the Front Stabilizer (37) to the Frame (54)
with two M8 x 82mm Screws (53), two M8 Split Washers (8), and two M8 Washers (71).
Remove the packing material.
4. Orient the Right Pedal (76) as shown.
Attach the Right Pedal (76) to the Right Pedal
Arm (75) with two M10 x 45mm Bolts (39), two M10 Washers (10), and two M10 Locknuts (32).
Attach the Left Pedal (not shown) to the Left
Pedal Arm (not shown) in the same way.
8
71
37
54
4
39
76
53
5. Attach the Right Pedal Arm Cover (85) to the Right Pedal Arm (75) with an M4 x 20mm Self­tapping Screw (45).
Repeat this step on the other side of the
elliptical.
10
32
75
5
85
75
45
8
Loading...
+ 16 hidden pages