Weslo WLBE0109.0 Owner's Manual
www.weslo.com
Model No. WLBE0109.0
Serial No.
Write the serial number in the
space above for future reference.
Serial Number Decal
QUESTIONS?
If you have questions, or if parts are
damaged or missing, DO NOT
CONTACT THE STORE; please
contact Customer Care.
USERʼS MANUAL
IMPORTANT: Please register this
product (see the limited warranty
on the back cover of this manual)
before contacting Customer Care.
CALL TOLL-FREE:
1-866-699-3756
Mon.–Fri. 6 a.m.–6 p.m. MT
Sat. 8 a.m.–4 p.m. MT
ON THE WEB:
www.wesloservice.com
CAUTION
Read all precautions and instructions in this manual before using
this equipment. Keep this manual
for future reference.
TABLE OF CONTENTS
WARNING DECAL PLACEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
SSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
A
ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
ROTATING ON THE INVERSION TABLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
DEVELOPING A PROGRAM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
PART LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
EXPLODED DRAWING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
ORDERING REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover
LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Back Cover
WARNING DECAL PLACEMENT
This drawing shows the location(s) of the warning decal(s). If a decal is missing or illegible, see the
front cover of this manual and request a free replacement decal. Apply the decal in the location
shown. Note: The decal(s) may not be shown at actual size.
WESLO is a registered trademark of ICON IP, Inc.
2
IMPORTANT PRECAUTIONS
WARNING: To reduce the risk of serious injury, read all important precautions and
instructions in this manual and all warnings on your inversion table before using your inversion
table. ICON assumes no responsibility for personal injury or property damage sustained by or
hrough the use of this product.
t
1. Before beginning any exercise program,
consult your physician. This is especially
important for persons over age 35 or persons with pre-existing health problems.
2. It is the responsibility of the owner to ensure
that all users of the inversion table are adequately informed of all precautions.
3. Your inversion table is intended for home
use only. Do not use your inversion table in
a commercial, rental, or institutional setting.
4. Keep the inversion table indoors, away from
moisture and dust. Do not put the inversion
table in a garage or covered patio or near
water.
5. Use the inversion table only on a level surface. Cover the floor beneath the inversion
table to protect the floor.
6. Make sure that all parts are properly tightened each time the inversion table is used.
Replace any worn parts immediately.
7. Keep children under age 12 and pets away
from the inversion table at all times.
11. Wear athletic shoes with laces to help
secure your feet in the inversion table and
for foot protection while using the inversion
table.
12. Always engage the pins on the backrest
frame into the same holes in both pivot bars.
13. Make sure that the pivot bars are held in the
brackets on the backrest frame before you
use the inversion table.
14. Keep hands and feet away from moving
parts.
15. Make sure that the ankle lock is secured
snugly against your ankles and that the
short knob is fully tightened before you use
the inversion table.
16. Make sure that the linking bars are in
straight positions before you use the inversion table.
17. Do not use the handlebars to rotate upward
on the inversion table; the handlebars are
for mounting and dismounting the inversion
table.
8. The inversion table is designed to support a
maximum user weight of 300 lbs. (136 kg).
9. Do not use weights with the inversion table.
10. The inversion table should be used only by
persons 6 ft. 6 in. (198 cm) tall or less.
18. Perform all activities on the inversion table
in a slow, controlled manner. Aggressive
movement can cause the inversion table to
tip over.
19. Use the inversion table with a partner.
partner should be ready to return the
backrest to the upright position if you cannot complete a rotation.
3
Your
20. If you feel pain or dizziness while using the
inversion table, stop immediately.
21. The following factors and conditions may
make inverting inadvisable (this list is not
exhaustive; it is intended only for reference).
If one or more factors or conditions apply to
you, consult your physician before using the
inversion table.
• Pregnancy
• Hiatal hernia or ventral hernia
• Glaucoma, retinal detachment, or conjunc-
tivitis
• High blood pressure, hypertension, or
recent stroke or transient ischemic attack
• Heart or circulatory disorders for which
you are being treated
Middle ear infection and extreme obesity
•
• Spinal injury, cerebral sclerosis, or acutely
swollen joints
• Bone weakness (osteoporosis), recent
unhealed fractures, medullary pins, or surgically implanted orthopedic supports
• The use of anticoagulants, including high
doses of aspirin
22. Use your inversion table only as described
in this manual.
4
BEFORE YOU BEGIN
Thank you for selecting the WESLO®INVERSION
FLEX SYSTEM inversion table. The inversion table
will increase your intervertebral dimension, decrease
ressure on intervertebral discs, stretch and relax your
p
muscles, and temporarily relieve back pain associated
ith the listed conditions.
w
For your benefit, read this manual carefully before
you use the inversion table. If you have questions
Backrest Frame
Backrest
Right Side
after reading this manual, please see the front cover
of this manual. To help us assist you, note the product
model number and serial number before contacting
s. The model number and the location of the serial
u
number decal are shown on the front cover of this
anual.
m
Before reading further, please familiarize yourself with
the parts that are labeled in the drawing below.
ASSEMBLED DIMENSIONS:
Height: 5 ft. (152 cm)
Width: 2 ft. 3 in. (69 cm)
Depth: 4 ft. 1 in. (124 cm)
Left Side
Handlebar
Cover
Rear Frame
Chain
Round Foam Pad
Note: The terms “right side” and “left side” are
determined relative to a person using the inversion table; they do not correspond to right and
left in the drawings in this manual.
Pin
Long Knob
Adjustment Leg
Short Knob
Ankle Lock
Foot Plate
5
ASSEMBLY
To make assembly easier, carefully read the following information and instructions:
Assembly requires two persons.
•
• Place all parts in a cleared area and remove the
packing materials. Do not dispose of the packing
materials until assembly is completed.
• Make sure all parts are oriented as shown in the
drawings.
• Tighten all parts as you assemble them, unless
instructed to do otherwise.
1.
Before beginning assembly, make sure
that you understand the information in
the box above.
Open the Front and Rear Frames (5, 6) and
push downward on the Long and Short Linking
Bars (7, 8) so that they are in a straight position
as shown.
• The following tools (not included) may be required
for assembly:
wo adjustable wrenches
t
one rubber mallet
one standard screwdriver
one Phillips screwdriver
Assembly may be more convenient if you have a
socket set, a set of open-end or closed-end
wrenches, or a set of ratchet wrenches.
1
8
7
6
8
5
7
6
Loading...