Weslo WCTL29509.0 User Manual

Model No. WCTL29509.0
Serial No.

Write the serial number in the space
above for future reference.

Serial Number

Decal

QUESTIONS?

If you have questions, or if parts are
damaged or missing, PLEASE

CONTACT OUR CUSTOMER
SERVICE DEPARTMENT DI­RECTLY.

CALL TOLL-FREE:

1-888-936-4266

Mon.–Fri., 8:00 until 17:00 EST
(excluding holidays)

USER'S MANUAL

OR E-MAIL US:
[e-mail]

CAUTION

Read all precautions and instruc­tions in this manual before using
this equipment. Save this manual
for future reference.

www.weslo.com

TABLE OF CONTENTS

WARNING DECAL PLACEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

SSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

A

OPERATION AND ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

HOW TO FOLD AND MOVE THE TREADMILL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

EXERCISE GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21

PART LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23

EXPLODED DRAWING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24

ORDERING REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover

LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover

WARNING DECAL PLACEMENT

This drawing shows the location(s) of the
warning decal(s). If a decal is missing or il-

legible, see the front cover of this manual
and request a free replacement decal.
Apply the decal in the location shown.

Note: The decal(s) may not be shown at ac­tual size.

WESLO is a registered trademark of ICON IP, Inc.

2

IMPORTANT PRECAUTIONS

WARNING: To reduce the risk of serious injury, read all important precautions and in-

structions in this manual and all warnings on your treadmill before using your treadmill. ICON as-

umes no responsibility for personal injury or property damage sustained by or through the use of

s
this product.

1. Before beginning this or any exercise pro­gram, consult your physician. This is espe­cially important for persons over age 35 or
persons with pre-existing health problems.

2. It is the responsibility of the owner to ensure
that all users of this treadmill are adequately
informed of all warnings and precautions.

3. Use the treadmill only as described.

4. Place the treadmill on a level surface, with at
least 8 ft. (2.4 m) of clearance behind it and 2
ft. (0.6 m) on each side. Do not place the
treadmill on any surface that blocks air open­ings. To protect the floor or carpet from dam­age, place a mat under the treadmill.

5. Keep the treadmill indoors, away from mois­ture and dust. Do not put the treadmill in a
garage or covered patio, or near water.

6. Do not operate the treadmill where aerosol
products are used or where oxygen is being
administered.

or more amps. No other appliance should be on
the same circuit. Do not use an extension cord.

12. To decrease the possibility of your treadmill
being damaged, always use a surge suppres­sor with your treadmill. To purchase a surge
suppressor call the telephone number on the
front cover of this manual.

13. Failure to use a properly functioning surge
suppressor could result in damage to the con­trol system of the treadmill. If the control sys­tem is damaged, the walking belt may slow,
accelerate, or stop unexpectedly, which may
result in a fall and serious injury.

14. Keep the power cord and the surge suppres­sor away from heated surfaces.

15. Never move the walking belt while the power
is turned off. Do not operate the treadmill if
the power cord or plug is damaged, or if the
treadmill is not working properly. (See TROU­BLESHOOTING on page 19 if the treadmill is
not working properly.)

7. Keep children under age 12 and pets away
from the treadmill at all times.

8. The treadmill should not be used by persons
weighing more than 250 lbs. (113 kg).

9. Never allow more than one person on the
treadmill at a time.

10. Wear appropriate exercise clothes when
using the treadmill. Do not wear loose clothes
that could become caught in the treadmill.
Athletic support clothes are recommended for
both men and women. Always wear athletic

shoes; never use the treadmill with bare feet,
wearing only stockings, or in sandals.

11. When connecting the power cord (see page 12),
plug the power cord into a surge suppressor
(not included) and plug the surge suppressor
into a grounded circuit capable of carrying 15

16. Read, understand, and test the emergency
stop procedure before using the treadmill (see
HOW TO TURN ON THE POWER on page 13).

17. Never start the treadmill while you are stand­ing on the walking belt. Always hold the
handrails while using the treadmill.

18. The pulse sensor is not a medical device.
Various factors, including your movement,
may affect the accuracy of heart rate readings.
The pulse sensor is intended only as an exer­cise aid in determining heart rate trends in
general.

19. The treadmill is capable of high speeds.
Adjust the speed in small increments to avoid
sudden jumps in speed.

20. Never leave the treadmill unattended while it is
running. Always remove the key and unplug
the power cord when the treadmill is not in use.

3

21. Do not attempt to raise, lower, or move the
treadmill until it is properly assembled. (See

SSEMBLY on page 6 and HOW TO FOLD

A
AND MOVE THE TREADMILL on page 17.)
You must be able to safely lift 45 lbs. (20 kg)
to raise, lower, or move the treadmill.

22. When folding or moving the treadmill, make
sure that the storage latch is holding the
frame securely in the storage position.

23. Do not change the incline of the treadmill by
placing objects under the treadmill.

25. Never drop or insert any object into any
opening on the treadmill.

DANGER: Always unplug the power

26.
cord immediately after use, before cleaning
the treadmill, and before performing the main­tenance and adjustment procedures de-

cribed in this manual. Never remove the

s
motor hood unless instructed to do so by an
authorized service representative. Servicing
other than the procedures in this manual
should be performed by an authorized service
representative only.

24. Inspect and properly tighten all parts of the
treadmill regularly.

SAVE THESE INSTRUCTIONS

27. This treadmill is intended for in-home use
only. Do not use this treadmill in any commer­cial, rental, or institutional setting.

4

BEFORE YOU BEGIN

Thank you for selecting the new WESLO®CADENCE
GTX treadmill. The CADENCE GTX treadmill combines

dvanced technology with innovative design to help you

a
get the most from your exercise in the convenience of

our home. And when youʼre not exercising, the tread-

y
mill can be folded up, requiring less than half the floor
space of other treadmills.

For your benefit, read this manual carefully before
using the treadmill. If you have questions after read-

Accessory Tray

Handrail

Storage Latch

ing this manual, please see the front cover of this man­ual. To help us assist you, note the product model

umber and serial number before contacting us. The

n
model number and the location of the serial number

ecal are shown on the front cover of this manual.

d

Before reading further, please review the drawing
below and familiarize yourself with the labeled parts.

Console

Key/Clip

Walking Belt

Foot Rail

Idler Roller
Adjustment Bolts

Hood

Reset/Off

Circuit Breaker

Power Cord

Wheel

Platform Cushion

5

M10 Flat

Washer (14)–2

G

M8 x 15mm

Bolt (8)–6

M10 Star

Washer (9)–2

M8 Star

Washer (5)–6

M10 x 58mm Bolt (2)–4

M10 x 110mm Bolt (1)–2

16mm Screw

(85)–2

M5 Star

Washer (7)–2

M8 Nut (46)–2

19mm Screw (10)–4

M8 Flat

Washer (72)–4

18mm Screw (58)–2

19mm Tek

Screw (26)–6

M6 Flat

Washer (32)–4

M6 Nut (43)–4

M6 x 58mm Bolt (13)–4

M8 x 52mm Bolt (82)–2

ASSEMBLY

ssembly requires two persons. Set the treadmill in a cleared area and remove all packing materials; do not

A
dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking

belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to
the top of the walking belt or the shipping carton. This does not affect treadmill performance. If there is lubricant

n top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.

o

In addition to the included hex keys , assembly requires a Phillips screwdriver , an
adjustable wrench , and needlenose pliers . Use the drawings below to identify the hard-
ware used during assembly. Note: If a part is not in the hardware kit, check to see if it has been preattached
to one of the parts to be assembled. Extra hardware may be included. To avoid damaging plastic parts, do
not use power tools for assembly.

1. Make sure that the power cord is unplugged.
Place a piece of cardboard under the tread­mill frame to protect the floor during assem­bly.

Have a second person hold the Base (52) in the
position shown.

Attach six Base Feet (63) to the Base (52) with
six 19mm Tek Screws (26).

1

26

63

6

52

26

63

26

63

26

63

26

63

2. Have a second person hold the Base (52) in the
position shown.

dentify the Left Upright (53) (the Right Upright

I
[54] has a large hole near the lower end).

Hold the Left Upright (53) so that the two indi­cated small holes are on top. Attach the Left

Upright to the Base (52) with two M10 x 58mm
Bolts (2). Do not tighten the Bolts yet.

Attach the Right Upright (54) to the Base (52) in
the same way.

2

arge

L

Hole

54

Small Holes

2

52

2

53

3. Slide the two Wheel Housings (45) onto the Base
(52). Attach each Wheel Housing with two M6 x
58mm Bolts (13), two M6 Flat Washers (32), and
two M6 Nuts (43).

4. Remove the bolts (not shown) from the indicated
holes in the Hood (65) (only one side is shown).
Remove the cardboard packaging and discard
the bolts.

Position the Base (52) as close to the front of
the treadmill as possible.

3

45

13

4

39

32

32

Wire Tie

43

52

13

45

32

43

32

See the inset drawing. Locate the wire tie in
the Right Upright (54). Tie the wire tie securely
to the connector on the end of the Wire Harness
(39). Next, pull the opposite end of the wire tie
out of the upper end of the Right Upright, until
the Wire Harness is routed completely through
the Right Upright. Secure the Wire Harness to
the upper end of the Right Upright so that it will
not fall inside.

65

Hole

52

54

54

39

Wire Tie

7

5. See the left inset drawing and identify a Frame
pacer (11). Hold the Frame Spacer between

S
the Right Upright (54) and the Frame (51).
Attach the Right Upright to the Frame with an
M10 x 110mm Bolt (1), an M10 Flat Washer

14), and an M10 Star Washer (9); do not fully

(

tighten the Bolt yet.

5

4

5

14

1

9

11

51

11

54

14

1

11

6. Hold the other Frame Spacer (11) between the

Left Upright (53) and the Frame (51). Attach the
Left Upright to the Frame with an M10 x 110mm
Bolt (1), an M10 Flat Washer (14), and an M10
Star Washer (9); do not fully tighten the Bolt

yet.

51

6

53

14

1

9

11

51

11

9

53

14

1

9

11

51

8

7. Set the Console (91) face down on a soft sur­ace to avoid scratching it. Next, identify the

f
Right Handrail (33), which has a large hole in
the location shown. Hold the Right Handrail near
the Console.

Next, insert the console wire into the large hole
in the side of the Right Handrail (33). Using
needlenose pliers, carefully grasp the connector
and pull the console wire out of the hole near
the bracket on the Right Handrail.

7

Connector

Bracket

33

Console Wire

Large

Hole

91

8. Set the Right Handrail (33) on the Console (91).

Make sure that the console wire is not
pinched. Start a 16mm Screw (85) with an M5

Star Washer (7) into the Right Handrail, and
then start two 19mm Screws (10) into the Right
Handrail. Tighten the 16mm Screw and then

tighten the two 19mm Screws; do not over­tighten the Screws.

Attach the Left Handrail (not shown) to the
Console (91) in the same way. Note: There is

not a console wire on the left side.

8

Console Wire

33

85

7

10

91

9