Weslo WCTL25320 Owner's Manual
Model No. WCTL25320
www.weslo.com
Visit our website at
Serial No.
Write the serial number in the
space above for future reference.
Serial
Number
Decal
QUESTIONS?
As a manufacturer, we are committed to providing complete
customer satisfaction. If you
have questions, or if there are
missing parts, please call:
1-888-936-4266
USER'S MANUAL
Mon.–Fri. 8h00 until 18h30 EST
(excluding holidays).
CAUTION
Read all precautions and instructions in this manual before using
this equipment. Save this manual
for future reference.
TABLE OF CONTENTS
IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
OPERATION AND ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
TO FOLD AND MOVE THE TREADMILL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
HOW
MAINTENANCE AND TROUBLE-SHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
CONDITIONING GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
ORDERING REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Back Cover
LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover
Note: A PART IDENTIFICATION CHART, an EXPLODED DRAWING, and a PART LIST are attached in the
center of this manual.
IMPORTANT PRECAUTIONS
WARNING: To reduce the risk of burns, fire, electric shock, or injury to persons, read
the following important precautions and information before operating the treadmill.
1. It is the responsibility of the owner to ensure
that all users of this treadmill are adequately
informed of all warnings and precautions.
2. Use the treadmill only as described.
3. Place the treadmill on a level surface, with at
least 2 m (8 ft.) of clearance behind it and 0.5
m (2 ft.) on each side. Do not place the treadmill on any surface that blocks air openings.
To protect the floor or carpet from damage,
place a mat under the treadmill.
4. Keep the treadmill indoors, away from moisture and dust. Do not put the treadmill in a
garage or covered patio, or near water
5. Do not operate the treadmill where aerosol
products are used or where oxygen is being
administered.
Keep children under the age of 12 and pets
6.
away from the treadmill at all times.
The treadmill should not be used by persons
7.
weighing more than 115 kg (250 pounds).
Never allow more than one person on the
8.
treadmill at a time.
ear appropriate exercise clothing when
W
9.
using the treadmill. Do not wear loose clothing that could become caught in the treadmill. Athletic support clothes are recommend
ed for both men and women.
athletic shoes. Never use the treadmill with
Always wear
.
bare feet, wearing only stockings, or in sandals.
10. When connecting the power cord (see page 8),
plug the power cord into a surge suppressor
(not included) and plug the surge suppressor
into a grounded circuit capable of carrying 15
or more amps. No other appliance should be
on the same circuit. Do not use an extension
cord.
11. Use only a single-outlet surge suppressor that
meets all of the specifications described on
page 8. To purchase a surge suppressor
your local WESLO dealer or call 1-800-8063651 and order part number 146148.
Failure to use a properly functioning surge
12.
suppressor could result in damage to the con
trol system of the treadmill. If the control sys
tem is damaged, the walking belt may change
speed or stop unexpectedly
in a fall and serious injury
13. Keep the power cord and the surge suppressor away from heated surfaces.
Never move the walking belt while the power
14.
is turned off. Do not operate the treadmill if
the power cord or plug is damaged, or if the
treadmill is not working properly. (See page 4
if the treadmill is not working properly
-
Never start the treadmill while you are stand
15.
ing on the walking belt. Always hold the
handrails while using the treadmill.
, which may result
.
, see
-
-
.)
-
2
16. The treadmill is capable of high speeds.
Adjust the speed in small increments to
avoid sudden jumps in speed.
17. Never leave the treadmill unattended while it is
running. Always remove the key and unplug
the power cord when the treadmill is not in
use.
18. Do not attempt to raise, lower, or move the
treadmill until it is properly assembled. (See
ASSEMBLY on page 5, and HOW TO MOVE
THE TREADMILL on page 11.) You must be
able to safely lift 20 kg (45 pounds) in order
to raise, lower, or move the treadmill.
19. Do not change the incline of the treadmill by
placing objects under the treadmill.
20. When folding or moving the treadmill, make
sure that the storage latch is fully closed.
21. Inspect and properly tighten all parts of the
treadmill regularly
22. Never drop or insert any object into any
opening.
DANGER: Always unplug the power
23.
cord immediately after use, before cleaning
the treadmill, and before performing the
maintenance and adjustment procedures
described in this manual. Never remove the
motor hood unless instructed to do so by an
authorized service representative. Servicing
other than the procedures in this manual
should be performed by an authorized service representative only.
24. This treadmill is intended for in-home use
only. Do not use this treadmill in any commercial, rental, or institutional setting.
.
WARNING: Before beginning this or any exercise program, consult your physician.
This is especially important for persons over the age of 35 or persons with pre-existing health problems. Read all instructions before using. ICON assumes no responsibility for personal injury or property damage sustained by or through the use of this product.
SAVE THESE INSTRUCTIONS
The decals shown have been placed on
your treadmill. If a decal is missing, or if it
is not legible, please call our Customer
Service Department, toll-free, to order a
free replacement decal (see ORDERING
REPLACEMENT PARTS on the back cover
of this manual). Apply the decal in the
location shown. Note: The decals are not
shown at actual size.
3
BEFORE YOU BEGIN
Thank you for selecting the WESLO®CADENCE C32
treadmill.
advanced technology with innovative design to let you
enjoy an excellent form of cardiovascular exercise in
the convenience and privacy of your home. And when
you’re not exercising, the unique CADENCE C32 can
be folded up, requiring less than half the floor space of
other treadmills.
For your benefit, read this manual carefully before
using the treadmill. If you have additional questions,
The CADENCE C32 treadmill combines
Accessory Tray
Handrails
Storage Latch
please call our Customer Service Departmentat 1-888-
936-4266, Monday through Friday 8h00 until 18h30
Eastern Time (excluding holidays). To help us assist
you, please note the product model number and serial
number before calling. The model number of the treadmill is WCTL25320. The serial number can be found
on a decal attached to the treadmill (see the front
cover of this manual for the location).
Before reading further, please review the drawing
below and familiarize yourself with the labeled parts.
Console
Water Bottle Holder
(Bottle not included)
Key/Clip
alking Belt
W
Foot Rails
BACK
Rear Roller
Adjustment Bolts
Uprights
Incline Pin
Incline Leg
FRONT
Circuit Breaker
Power Cord
RIGHT SIDE
4
ASSEMBLY
Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials; do not
dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking
belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred
to the top of the walking belt or the shipping carton. This does not affect treadmill performance. If there is lubricant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.
Assembly requires a phillips screwdriver , two adjustable wrenches , and
needlenose pliers .
1. Note: To identify small parts used during assembly,
refer to the PART IDENTIFICATION CHART in the
center of this manual.
Attach four Base Pads (63) to the bottom of the Base
(46) with four 3/4” Tek Screws (3).
2. Attach a Frame Spacer (27) to the left side of the Frame
(79) with a Spacer Screw (89) as shown.
Identify the Left Upright (53), which does not have a large
round hole near the lower end. Hold the Left Upright so
the indicated small hole is in the position shown. Loosely
thread a Frame Bolt (70) with a Washer (66) and a Star
Washer (29) through the Left Upright and the Frame
Spacer (27) into the Frame (79) as shown. Do not tight-
en the bolts used in steps 2 through 5 until step 5 is
completed.
1
2a
53
29
70
46
63
3
63
3
79
89
27
66
Small
Hole
Refer to drawing 2b. Attach a Frame Spacer (27) to the
right side of the Frame (79) with a Spacer Screw (89).
Hold the Right Upright (62) so the indicated large hole is
in the position shown. Insert the Wire Harness (60) into
the large hole and out of the top of the Right Upright.
Loosely thread a Frame Bolt (70) with a Washer (66) and
a Star Washer (29) through the Right Upright (62) and the
Frame Spacer (27) into the Frame (79).
5
2b
79
27
60
89
Large
Hole
62
29
66
70
3. With the help of a second person, lift the Frame (79) and
attach the Base (46) to the Right Upright (62) with two
Upright Bolts (65), two 3/8” W
Nuts (61) as shown.
ashers (66), and two 3/8”
3
65
Attach the Base (46) to the Left Upright (not shown) in
the same way.
Attach the Wheels (68) to the outside of the Base with
two Wheel Bolts (67), 3/8” Washers (66), and 3/8” Nuts
(61) (only right side shown).
Wheel Bolts.
4. Raise the treadmill to the upright position.
If there are plastic ties in the brackets on the Left and
Right Handrails (45, 59), remove them. Hold the Right
Handrail near the Right Upright (62). Insert the Wire
Harness (60) up through the bracket on the Right
Handrail and out of the round hole in the center of the
Handrail. If necessary, use needlenose pliers to pull the
Wire Harness out of the hole. Be careful not to damage
the Wire Harness. Insert the brackets into the tops of
the Left and Right Uprights (53, 62).
Hand tighten four Handrail Bolts (42) with 1/4” Washers
(38) into the Uprights (53, 62) and the Handrails (45, 59).
Remove the tape from the connectors at the end of the
Wire Harness (60).
Do not overtighten the
61
66
62
61
79
4
45
38
42
68
42
38
53
46
67
60
59
66
Connectors
Bracket
42
38
62
5. Set the Console Base (52) on the Handrails (45, 59).
Thread four 3/4” Screws (2) into the Handrails and the
Console Base. After you have started all four Screws,
tighten the Screws until they are snug; do not overtighten the Screws.
Firmly tighten but do not overtighten the bolts used
in steps 2 through 4.
6. Insert the Battery Cover (54) up through the bottom of
the Console Base (52), with the hinges in the position
shown. The Cover should pivot down, away from the
Console Base.
42
38
5
59
6
52
2
2
Hinges
45
52
54
6
Loading...