Page 1
7
7
www.weslo.com
Model No. WLVB2978.0
Serial No.
Write the serial number in the
space above for reference.
Serial
Number
Decal
QUESTIONS?
If you have questions, or if parts
are missing, DO NOT CONTACT
THE STORE; please contact
Customer Care.
USERʼS MANUAL
IMPORTANT: You must note the
product model number and
serial number (see the drawing
above) before contacting us:
CALL TOLL-FREE:
1-866-699-3756
Mon.–Fri. 6 a.m.–6 p.m. MT
Sat. 8 a.m.–4 p.m. MT
ON THE WEB:
www.wesloservice.com
CAUTION
Read all precautions and instructions in this manual before using
this equipment. Keep this manual for future reference.
Page 2
TABLE OF CONTENTS
WARNING DECAL PLACEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
MPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
I
BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
HOW TO USE THE VIBRATION PLATFORM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
PART LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
EXPLODED DRAWING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
ORDERING REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover
LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover
WARNING DECAL PLACEMENT
This drawing shows the location(s) of the
warning decal(s). If a decal is missing or
illegible, call the telephone number on the
front cover of this manual and request a
free replacement decal. Apply the decal in
the location shown. Note: The decal(s) may
not be shown at actual size.
WESLO is a registered trademark of ICON IP, Inc.
2
Page 3
IMPORTANT PRECAUTIONS
WARNING: To reduce the risk of serious injury, read all important precautions and
instructions in this manual and all warnings on the vibration platform before using the vibration
platform. ICON assumes no responsibility for personal injury or property damage sustained by or
hrough the use of this product.
t
1. Before beginning any exercise program,
consult your physician. This is especially
important for persons over age 35 or persons with pre-existing health problems.
2. It is the responsibility of the owner to ensure
that all users of the vibration platform are
adequately informed of all precautions.
3. The vibration platform is intended for home
use only. Do not use the vibration platform
in a commercial, rental, or institutional setting.
4. Keep the vibration platform indoors, away
from moisture and dust. Place the vibration
platform on a level surface, with a mat
beneath it to protect the floor or carpet. Do
not place the vibration platform in a garage
or covered patio, or near water.
5. Inspect and properly tighten all parts regularly. Replace any worn parts immediately.
6. Keep children under age 12 and pets away
from the vibration platform at all times.
7. The vibration platform should not be used
by persons weighing more than 250 lbs.
(113 kg).
12. The following is a list of factors and conditions that may make exercising on the vibration platform inadvisable (this list is not
exhaustive; it is intended only for reference). If one or more factors or conditions
apply to you, consult your physician before
using the vibration platform.
• Knee or hip implant
• Pacemaker
• Recently placed screws, pins, bolts, or
spirals
• Acute hernia, discopathy, or spondylitis
• Serious heart or vascular disease
• Acute thrombosis
• Tumor
• Serious migraine
• Epilepsy
• Serious diabetes
• Recent wound due to operation
• Fresh inflammation
• Pregnancy
13. If you feel pain or dizziness while exercising, stop immediately and cool down.
14. Use the vibration platform only as described
in this manual.
15. When connecting the power cord, follow the
instructions on page 7.
8. Never allow more than one person on the
vibration platform at a time.
9. Keep your back straight while using the
vibration platform; do not arch your back.
When standing on the vibration platform,
bend your knees slightly and balance your
weight on the balls of your feet.
10. It is recommended that you use the vibration
platform no more than 15 minutes per day
and no more than 3 times per week.
11. Be careful when stepping down from the
vibration platform; your muscles will feel
different after you exercise on the vibration
platform.
16. Do not modify the power cord or use an
adapter to connect the power cord to an
improper receptacle. Keep the power cord
away from heated surfaces.
17. Never leave the vibration platform unattended while it is running.
DANGER: Always unplug the power
18.
cord when the vibration platform is not in
use and before cleaning the vibration platform. Servicing other than the procedures in
this manual should be performed by an
authorized service representative only.
3
Page 4
7
BEFORE YOU BEGIN
Thank you for selecting the revolutionary WESLO
IBRATION G 5.8 vibration platform. The vibration
V
platform offers whole body vibration options that will
make your workouts effective and enjoyable.
For your benefit, read this manual carefully before
you use the vibration platform. If you have ques-
tions after reading this manual, please see the front
cover of this manual. To help us assist you, note the
product model number and serial number before con-
Left Handlebar
®
tacting us. The model number and the location of the
erial number decal are shown on the front cover of
s
this manual.
To avoid a registration fee for any service needed
under warranty, you must register the vibration
platform at www.wesloservice.com/registration.
Before reading further, please familiarize yourself with
the parts that are labeled in the drawing below.
Right Handlebar
Handlebar Frame
Knob
Adapter
Control
Front Post
Mat
Casing
4
Page 5
ASSEMBLY
7
Place all parts of the vibration platform in a cleared area and remove the packing materials. Do not dispose of
the packing materials until assembly is completed.
1. Lift the Handlebar Frame (28) and the Front
ost (26) to the position shown.
P
Attach the Handlebar Frame (28) to the Bottom
Frame (18) with the two M8 Knobs (27).
Then, insert the Control (43) into the Control
Holder (32).
1
43
32
26
28
27
27
18
2. Attach the Left Handlebar (36) to the Handlebar
Frame (28) with two M8 x 16mm Screws (6)
and two M8 Arc Washers (31).
Attach the Right Handlebar (37) to the
Handlebar Frame (28) in the same way.
2
36
37
31
6
31
28
5
Page 6
7
3. Plug the Adapter (24) into the indicated jack.
7
Make sure that all parts of the vibration plat-
orm are properly tightened.
f
3
24
Jack
MAINTENANCE
Make sure that all parts are properly tightened each time you use the vibration platform. Replace any worn parts
immediately. Outer surfaces of the vibration platform can be cleaned with a damp cloth and a mild, non-abrasive
detergent; do not use solvents to clean the vibration platform.
STORING THE VIBRATION PLATFORM
To store the vibration platform, unplug the Adapter
(not shown). Next, remove the two M8 Knobs (27)
from the Handlebar Frame (28). Then, lower the
Handlebar Frame and the Front Post (26).
27
26
28
27
6
Page 7
HOW TO USE THE VIBRATION PLATFORM
DIAGRAM OF THE CONTROL
A
C
E
A. On/Off Button—This button turns the power on
and off.
B. Power Indicator—This indicator lights when the
power is on.
B
D
F
HOW TO TURN ON THE POWER
IMPORTANT: If the vibration platform has been
xposed to cold temperatures, allow it to warm to
e
room temperature before turning on the power. If
you do not do this, the electronic components
may become damaged.
Plug in the adapter as described above. Next, press
the On/Off button on the control. The power indicator
will light and the vibration platform will begin to
vibrate. Note: The vibration platform will automati-
cally turn off after 10 minutes.
HOW TO CHANGE THE VIBRATION FREQUENCY
When the power is turned on, the lowest vibration frequency will be selected and the lowest frequency indicator will light. If a different vibration frequency is
desired, press the High or Low button repeatedly until
the desired vibration frequency indicator lights.
HOW TO USE THE AUTO MODES
Press the Auto button repeatedly to select one of the
three auto modes. The Auto indicator will light with a
different color to show which auto mode is selected.
When the first mode is selected, the Auto indicator will
be green and the third, fourth, and fifth vibration frequencies will be selected in a repetitive sequence.
C. Auto Button—This button selects the three auto
modes that automatically change the vibration frequency.
D. Auto Indicator—This indicator shows which auto
mode is selected.
E. Frequency Indicators—These indicators show
which of the five vibration frequencies is selected.
F. High and Low Buttons—These buttons increase
and decrease the vibration frequency.
HOW TO PLUG IN THE ADAPTER
Plug one end of the included adapter into the vibration
platform (see assembly step 3 on page 6). Plug the
other end of the adapter into an appropriate outlet that
is properly installed in accordance with all local codes
and ordinances.
When the second mode is selected, the Auto indicator
will be orange and the first, second, third, fourth, and
fifth vibration frequencies will be selected in a repetitive sequence.
When the third mode is selected, the Auto indicator
will be yellow and the second, third, and fifth vibration
frequencies will be selected in a repetitive sequence.
HOW TO TURN OFF THE POWER
To turn off the power, press the On/Off button. The
power indicator will darken. Unplug the adapter
when the vibration platform is not in use.
CONTROL TROUBLESHOOTING
If the control does not function properly, make sure
that the adapter is fully plugged into a 120-volt outlet.
7
Page 8
NOTES
8
Page 9
NOTES
9
Page 10
PART LIST—Model No. WLVB2978.0 R0109A
Key No. Qty. Description Key No. Qty. Description
11Mat
24M8 x 60mm Bolt
3
4 10 M8 Flat Washer
51Casing
6 12 M8 x 16mm Screw
7 12 M4.2 x 13mm Self-tapping Screw
84Cable Tie
91Vibration Frame
10 18 M4.2 x 16mm Self-tapping Screw
11 2 Flat Block
12 2 Bushing
13 4 M8 Locknut
14 1 Motor Cover
15 1 Motor
16 4 Damping Mat
17 1 13mm x 12mm Cap
18 1 Bottom Frame
19 6 Small Foot
20 2 M6 x 12mm Screw
21 1 Bottom Cover
22 3 M2.2 x 6.5mm Self-tapping Screw
23 1 Connector Board
24 1 Adapter
25 2 Upright Cap
13 M8 Spring Washer
26 1 Front Post
27 2 M8 Knob
8 1 Handlebar Frame
2
29 2 Handlebar Frame Cover
30 2 M8 x 25mm Screw
31 4 M8 Arc Washer
32 1 Control Holder
33 2 M3.5 x 32mm Self-tapping Screw
34 1 Motor Pad
35 2 Handlebar Cover
36 1 Left Handlebar
37 1 Right Handlebar
38 2 Handlebar Cap
39 1 Motor Base
40 1 Front Post Cover
41 1 M8 Nut
42 1 Front Post Pad
43 1 Control
44 1 Front Post Clamp
45 1 Front Post Cap
46 4 Casing Pad
47 1 M8 x 60mm Bolt
48 1 Control Cord Pad
*–Userʼs Manual
*–Tool
Note: Specifications are subject to change without notice. See the back cover of this manual for information about
ordering replacement parts. *These parts are not illustrated.
10
Page 11
EXPLODED DRAWING—Model No. WLVB2978.0 R0109A
1
2
2
3
3
4
4
5
6
6
3
3
9
10
10
10
11
20
15
11
20
39
4
4
13
13
14
21
23
22
40
16
16
16
18
10
19
10
10
10
10
7
19
10
6
6
6
19
3
3
3
3
19
8
7
19
47
4
4
41
3
24
45
26
17
30
32
33
12
12
10
29
25
25
27
27
28
29
10
6
31
31
6
31
36
35
3
8
4
3
35
37
38
7
7
7
8
7
34
42
46
46
8
7
44
48
11
Page 12
ORDERING REPLACEMENT PARTS
To order replacement parts, please see the front cover of this manual. To help us assist you, be prepared to
rovide the following information when contacting us:
p
• the model number and serial number of the product (see the front cover of this manual)
the name of the product (see the front cover of this manual)
•
• the key number and description of the replacement part(s) (see the PART LIST and the EXPLODED
DRAWING near the end of this manual)
LIMITED WARRANTY
ICON Health & Fitness, Inc. (ICON) warrants this product to be free from defects in workmanship and
material, under normal use and service conditions. Parts and labor are warranted for ninety (90) days
from the date of purchase.
This warranty extends only to the original purchaser. ICONʼs obligation under this warranty is limited to
repairing or replacing, at ICONʼs option, the product through one of its authorized service centers. All
repairs for which warranty claims are made must be preauthorized by ICON. If the product is shipped to
a service center, freight charges to and from the service center will be the customerʼs responsibility. For
replacement parts shipped while the product is under warranty, the customer will be responsible for a
minimal handling charge. For in-home service, the customer will be responsible for a minimal trip
charge. This warranty does not extend to any damage to a product caused by or attributable to freight
damage, abuse, misuse, improper or abnormal usage, or repairs not provided by an ICON authorized
service center; products used for commercial or rental purposes; or products used as store display
models. No other warranty beyond that specifically set forth above is authorized by ICON.
ICON is not responsible or liable for indirect, special, or consequential damages arising out of or in connection with the use or performance of the product; damages with respect to any economic loss, loss of
property, loss of revenues or profits, loss of enjoyment or use, or costs of removal or installation; or
other consequential damages of whatsoever nature. Some states do not allow the exclusion or limitation of incidental or consequential damages. Accordingly, the above limitation may not apply to you.
The warranty extended hereunder is in lieu of any and all other warranties, and any implied warranties
of merchantability or fitness for a particular purpose are limited in their scope and duration to the terms
set forth herein. Some states do not allow limitations on how long an implied warranty lasts.
Accordingly, the above limitation may not apply to you.
This warranty gives you specific legal rights. You may also have other rights that vary from state to state.
ICON Health & Fitness, Inc., 1500 S. 1000 W., Logan, UT 84321-9813
Part No. 276462 R0109A Printed in China © 2009 ICON IP, Inc.
Loading...