Model No. WLTL33205.0
Visit our website at
www.weslo.com
new products, prizes,
fitness tips, and much more!
Serial No.
Serial Number
Decal
QUESTIONS?
As a manufacturer, we are committed to providing complete
customer satisfaction. If you
have questions, or if parts are
damaged or missing, PLEASE
CONTACT OUR CUSTOMER
SERVICE DEPARTMENT DIRECTLY.
USER'S MANUAL
CALL TOLL-FREE:
1-866-699-3756
Mon.–Fri., 6 a.m.–6 p.m. MST
ON THE WEB:
www.wesloservice.com
CAUTION
Read all precautions and instructions in this manual before using
this equipment. Save this manual
for future reference.
TABLE OF CONTENTS
MPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
I
BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
SSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
A
OPERATION AND ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
HOW TO FOLD AND MOVE THE TREADMILL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
CONDITIONING GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover
ORDERING REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover
Note: An EXPLODED DRAWING and a PART LIST are attached in the center of this manual.
IMPORTANT PRECAUTIONS
WARNING: To reduce the risk of burns, fire, electric shock, or injury to persons, read the
following important precautions and information before operating the treadmill.
1. It is the responsibility of the owner to ensure
that all users of this treadmill are adequately
informed of all warnings and precautions.
2. Use the treadmill only as described.
3. Place the treadmill on a level surface, with at
least eight feet of clearance behind it and two
feet on each side. Do not place the treadmill
on any surface that blocks air openings. To
protect the floor or carpet from damage, place
a mat under the treadmill.
4. Keep the treadmill indoors, away from moisture and dust. Do not put the treadmill in a
garage or covered patio, or near water.
5. Do not operate the treadmill where aerosol
products are used or where oxygen is being
administered.
6. Keep children under the age of 12 and pets
away from the treadmill at all times.
7. The treadmill should be used only by persons
weighing 250 pounds or less.
8. Never allow more than one person on the
treadmill at a time.
9. Wear appropriate exercise clothes when
using the treadmill. Do not wear loose clothes
that could become caught in the treadmill.
Athletic support clothes are recommended for
both men and women.
shoes while exercising. Never use the treadmill with bare feet, wearing only stockings, or
in sandals.
10. When connecting the power cord (see page 8),
plug the power cord into a surge suppressor
(not included) and plug the surge suppressor
into a grounded circuit capable of carrying 15
or more amps. No other appliance should be on
the same circuit. Do not use an extension cord.
11. Use only a single-outlet surge suppressor that
meets all of the specifications described on
page 8. To purchase a surge suppressor, see
your local Weslo dealer or call the toll-free
telephone number on the front cover of this
manual and order part number 146148, or see
your local electronics store.
Failure to use a properly functioning surge
12.
suppressor could result in damage to the con
trol system of the treadmill. If the control system is damaged, the walking belt may change
speed, accelerate, or stop unexpectedly,
which may result in a fall and serious injury.
Keep the power cord and the surge
13.
sor away from heated surfaces.
Always wear athletic
suppres-
-
2
14. Never move the walking belt while the power
is turned off. Do not operate the treadmill if
the power cord or plug is damaged, or if the
readmill is not working properly. (See TROU-
t
BLESHOOTING on page 13 if the treadmill is
not working properly.)
AND MOVE THE TREADMILL on page 12.)
You must be able to safely lift 45 pounds (20
kg) to raise, lower, or move the treadmill.
20. When folding or moving the treadmill, make
ure that the storage latch is fully closed.
s
5. Read, understand, and test the emergency
1
stop procedure before using the treadmill (see
OPERATION and ADJUSTMENT).
16. Never start the treadmill while you are standing on the walking belt. Always hold the
handrails while using the treadmill.
17. The treadmill is capable of high speeds.
Adjust the speed in small increments to avoid
sudden jumps in speed.
18. Never leave the treadmill unattended while it
is running. Always remove the key and unplug the power cord when the treadmill is not
in use.
19. Do not attempt to raise, lower, or move the
treadmill until it is properly assembled. (See
ASSEMBLY on page 5, and HOW TO FOLD
21. Inspect and properly tighten all parts of the
readmill regularly.
t
22. Never insert any object into any opening.
23. DANGER: Always unplug the power
cord immediately after use, before cleaning
the treadmill, and before performing the maintenance and adjustment procedures described in this manual. Never remove the
motor hood unless instructed to do so by an
authorized service representative. Servicing
other than the procedures in this manual
should be performed by an authorized service
representative only.
24. This treadmill is intended for in-home use
only. Do not use this treadmill in a commercial, rental, or institutional setting.
WARNING: Before beginning this or any exercise program, consult your physician. This
is especially important for persons over the age of 35 or persons with pre-existing health problems.
Read all instructions before using. ICON assumes no responsibility for personal injury or property
damage sustained by or through the use of this product.
SAVE THESE INSTRUCTIONS
The decals shown here have been placed on your
treadmill. If a decal is missing, or if it is not legible, call
the toll-free telephone number on the front cover of
this manual and order a free replacement decal. Apply
the decal in the location shown.
3
BEFORE YOU BEGIN
hank you for selecting the WESLO
T
readmill. The SPORT 350 treadmill combines
t
advanced technology with innovative design to let you
enjoy an excellent form of cardiovascular exercise in
the convenience and privacy of your home. And when
you’re not exercising, the unique SPORT 350 can be
folded up, requiring less than half the floor space of
other treadmills.
For your benefit, read this manual carefully before
you use the treadmill. If you have questions after
reading this manual, please see the front cover of this
Console
Handrail
®
PORT 350
S
anual. To help us assist you, note the product model
m
umber and serial number before calling. The model
n
number of the treadmill is WLTL33205.0. The serial
number can be found on a decal attached to the treadmill (see the front cover of this manual for the location).
To avoid a registration fee for any service needed
under warranty, you must register the treadmill at
www.wesloservice.com/registration.
Before reading further, please review the drawing
below and familiarize yourself with the labeled parts.
Water Bottle Holder
(Bottle not included)
Key/Clip
Storage Latch
Walking Belt
Foot Rail
BACK
Rear Roller
Adjustment Bolts
Upright
RIGHT SIDE
Circuit Breaker
Power Cord
Cushioned Walking Platform
for maximum exercise comfort
Incline Leg
4
ASSEMBLY
To hire an authorized service technician to assemble the treadmill, call toll-free 1-800-445-2480.
Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not
ispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is
d
coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to the top
f the walking belt or the shipping carton. This is a normal condition and does not affect treadmill performance. If
o
there is lubricant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive
cleaner.
Assembly requires the included allen wrenches and your own phillips screwdriver ,
wire cutters , adjustable wrench , and needlenose pliers .
To identify the assembly hardware, see the PART IDENTIFICATION CHART in the center of this manual.
1. Make sure that the power cord is unplugged.
With the help of a second person, carefully tip the treadmill onto its left side as shown. Partially fold the Frame
(84) so the treadmill is more stable. Do not fully fold the
treadmill until it is completely assembled.
Attach four Base Pads (33) to the Base (38) with four
3/4” Tek Screws (31). Attach a Wheel (42) to the right
side of the Base with a Wheel Bolt (41) and a Wheel Nut
(43). Do not overtighten the Wheel Bolt; the Wheel
should turn freely.
2. See drawing 2a. Make sure that there are two U-nuts
(60) in the bottom of each Upright (14, 15).
Identify the Right Upright (15), which has a large round
hole and a slot near the lower end. While a second per
son holds the Right Upright near the Wire Harness (53),
insert the end of the Wire Harness into the round hole
and out of the upper end of the Right Upright.
Slide the slot in the Right Upright (15) onto the Upright
Lock Bracket (9) (see drawing 2b); slide the Right Upright
down until it reaches the Base (38). Make sure that the
Wire Harness (53) is not pinched. Attach the Right
Upright to the Base with two 2 1/2” Bolts (10) and two 5/16”
Star Washers (2).
With the help of a second person, tip the treadmill onto
its other side. Attach the Left Upright (14) as described
above. (Note: There is not a wire harness on the left
Attach the other Wheel (not shown) to the Base
side.)
(38) as described in step 1.
Do not tighten the 2 1/2” Bolts yet.
1
41
42
84
33
43
31
14
14, 15
60
33
31
53
9
38
2b
Side
View
38
2
15
Slot
Round Hole
2a
33
2
33
31
31
10
9
15
5
. With the help of a second person, position the treadmill
3
with the Uprights (14, 15) in the vertical position as
hown. Hold one of the Handrails (4) near the Right
s
Upright (15).
3
Large
Hole
53
Route the Wire Harness (53) through the bracket on the
Handrail (4) and out the large hole on the side of the
Handrail. Insert the bracket on the Handrail into the top
f the Right Upright (15). Attach the Handrail with two 1”
o
Bolts (16), two 1/4” Washers (32), and two 1/4” Star
Washers (7) as shown. Do not tighten the Bolts yet.
Attach the Left Handrail (not shown) as described above.
Note: There is not a wire harness on the left side.
4. Hold the Console Base (87) and the Console (11) near the
Right Upright (15). Insert the Wire Harness (53) through
the indicated plastic tie on the Console Base and up
through the hole in the Console Base. Remove the tape
from ends of the small wires in the Wire Harness. Set the
Console Base onto the Handrails (4). Attach the Console
Base with four 3/4” Screws (5) (only two Screws are
shown). Start all four Screws before tightening them.
Touch the right Handrail (4) to discharge any static.
Locate the two wires in the Wire Harness (53) that have
L-shaped connectors on the ends. Press the connectors
onto the two tabs on the switch shown in inset drawing 4a.
14
Bracket
4
16
32
7
15
16
7
32
4
11
87
4
Tie
53
4a
53
Tabs
5
Connect the other two wires in the Wire Harness (53) to
the back of the Console (11) in the locations shown by
the arrows in drawing 4. The connectors should slide
easily into the sockets and snap into place (see drawings 4b and 4c). If the connectors do not slide easily and
snap into place, turn the connectors and then insert
them.
IF THE CONNECTORS ARE NOT INSERTED
PROPERLY, THE CONSOLE MAY BE DAMAGED
WHEN THE POWER IS TURNED ON.
Set the Console (11) into the Console Base (87).
5.
sure that no wires are pinched. Attach the Console to
the Console Base with six 3/4” Screws (5) in the locations
shown.
Start all six Screws before tightening them.
Insert any extra Wire Harness (53) into the right Handrail
(4) and right Upright (15). Securely tighten the plastic
tie to prevent the Wire Harness from slipping. Then,
cut off the end of the plastic tie.
Make
4b
5
87
Tie
4
15
15
53
4c
11
5
5
5
6