Terminal Elements for KombiSIGN 50845
NEW
Screw terminal with cap
• Bayonet locking mechanism
enables quick and easy assembly
• The ideal solution for every
installation
of the signal tower
TECHNICAL SPECIFICATIONS:
Terminal element
Dimensions (Ø x Height): 52 mm x 65 mm
Material: Terminal element: PA + PC/ABS
Cap: PC
Fixing: Tube mounting, for tube Ø 25 mm
Single hole mounting, Base and bracket
mounting (accessory)
Connection: Screw terminal max. 1.5 mm
Cable entry: Cable diameter max. 9.5 mm
Terminal element with CAGE CLAMP
®
technology
Dimensions (Ø x Height): 52 mm x 65 mm
Material: Terminal element: PA + PC/ABS
Cap: PC
Fixing: Tube mounting, for tube Ø 25 mm
Base mounting, Single hole mounting and bracket
mounting (accessory)
Connection: CAGE CLAMP
®
technology max. 1.5 mm
Cable entry: Cable diameter max. 9.5 mm
2
2
modular
•
KombiSIGN 50
Signal Towers
NEW
ORDER SPECIFICATIONS TERMINAL ELEMENTS:
Terminal element 845 000 00
incl. cap, rubber seal and nut
®
Terminal element with CAGE CLAMP
845 010 00
incl. cap, rubber seal and nut
ADDITIONAL INFORMATION:
Terminal elements with CAGE CLAMP® technology enable leads to be quickly and easily wired,
guaranteeing a secure and reliable contact.
1 2 3
Insert screwdriver at a slight
angle into opening as far
as possible.
CAGE CLAMP® is a registered trademark of WAGO Kontakttechnik GmbH.
Open spring-loaded clamp with
the help of the screwdriver and
insert wire as far as possible.
Remove screwdriver the wire is firmly
clamped.
ACCESSORIES:
Terminal element CAGE CLAMP®
Technologie with cap
Suitable accessories can be found on page 67.
TECHNICAL DIAGRAMS:
125 g
see page 320
See note
on page 347
IP 54
+50°C
-20°C
65
Loading...