Wen MSA330 Instruction Manual

MITER SAW

STAND

For replacement parts visit

WENPRODUCTS.COM

Model # MSA330

bit.ly/wenvideo

IMPORTANT:

Your new tool has been engineered and manufactured to WEN’s highest standards for dependability, ease
of operation, and operator safety. When properly cared for, this product will supply you years of rugged,
trouble-free performance. Pay close attention to the rules for safe operation, warnings, and cautions. If
you use your tool properly and for its intended purpose, you will enjoy years of safe, reliable service.

NEED HELP? CONTACT US!

Have product questions? Need technical support?

Please feel free to contact us at:

800-232-1195

(M-F 8AM-5PM CST)

[e-mail]

WENPRODUCTS.COM

NOTICE: Please refer to wenproducts.com for the most up-to-date instruction manual.

TABLE OF CONTENTS

Product Specifications
Important Safety Rules
Electrical Information
Know Your Miter Saw Stand
Assembly & Adjustments
Mounting the Miter Saw
Maintenance
Parts List
Warranty Statement

TECHNICAL DATA

Model Number:
Maximum Loading Capacity:
Height:
Support Rollers Retracted Width:
Support Rollers Extended Width:
Power Outlet Input Rating:
Main Frame Diameter:
Saw Mounting Bracket Slot Length:
Roller Width:
Maximum Product Dimensions:
Product Net Weight:

330 lbs (150 kg) Evenly Distributed

2
3
4
6
7
9
10
11
12

MSA330

32-1/4 inch (819 mm)

46 inch (1168 mm)

79-1/4 inch (2013 mm)

3 Outlets, 120V, 60Hz, 15A

1-1/2 inch

15 inch

9-1/2 inch

79-1/4 x 24-7/8 x 39-3/8 inch

38 lbs

2

IMPORTANT SAFETY RULES

Safety is a combination of common sense, staying alert and knowing how your item works.

SAVE THESE SAFETY INSTRUCTIONS.

WARNING: To avoid mistakes and serious injury, read and understand this entire instruction manual.

Learn the tool’s applications, limitations, and possible hazards. These safety rules cannot address every
possible scenario you may encounter, so please use common sense and caution when using the tool.

WORK AREA SAFETY

1. Keep your work area clean, uncluttered, and well lit. Cluttered areas invite injuries and accidents. Keep the
ground clear of tripping hazards. Do not work on floor surfaces that are slippery with sawdust or wax.

2. Observe work area conditions. Keep bystanders at a safe distance from the work area. Never allow children or
pets near the tool.

2. Avoid dangerous conditions. DO NOT use power tools in wet or damp areas or expose them to rain. DO
NOT use power tools in the presence of flammable liquids or gases.

PERSONAL SAFETY

1. ANSI Z87.1-approved safety glasses should be worn by the operator and any assistants when using a miter saw.
Use ear protection such as plugs or muffs during extended periods of operation. Wear additional safety gear as
required by local, state and federal regulations.

2. Dress for safety. Do not wear loose clothing, gloves, neckties, or jewelry (rings, watches, etc.) and tie back long
hair to prevent anything from getting caught in the power tool.

3. Stay alert - watch what you’re doing and use common sense when using the tool. Do not use while you are tired
or under the influence of drugs, alcohol or medication that may affect your ability to properly use the tool. A mo­ment of inattention may result in serious personal injury.

4. Do not overreach. Keep proper footing and balance at all times.

MITER SAW STAND USE & CARE

1. For maximum stability, use the miter saw stand only on a flat, level surface.

2. Use the right tool for the job. Do not modify or use the tool to do a job for which it was not designed. Unauthor­ized modification may damage the tool and/or cause personal injuries.

3. Be careful when adjusting the stand. Keep fingers and hands clear to avoid getting them trapped.

4. Assemble and use the miter saw stand indoors only. Do not expose power tools to rain or wet conditions. Wa­ter entering the electrical system will increase the risk of electric shock.

5. Do not exceed the weight capacity of the miter saw stand. The main frame can support 330 pounds of total
weight (saw + material). Do not exceed this weight for any reason. Be aware of dynamic loading, as sudden move­ment may briefly create excess load, causing product to fail.

3

IMPORTANT SAFETY RULES

(Continued)

6. Do not overload the side extension arms.

7. Do not step, climb or sit on the miter saw stand.

8. Before operation, ensure that the locking pins on each leg are in the locked position and the mounting clamps
are securely locked in place.

9. Make sure the miter saw is as centered as possible to maintain the stand’s balance. Unbalanced stands can tip
during operation and cause injuries.

10. Before plugging in the power for the miter saw, ensure that the saw is securely fastened to the stand to prevent
unwanted movement of the saw.

11. Always check for damaged or worn out parts before using the miter saw stand. Check for alignment of moving
parts, jamming, breakage, improper mounting, or any other conditions that may affect the tool’s operation. Any
part that is damaged should be properly repaired or replaced before use. Do not use if the stand becomes dam­aged in any way.

12. Maintain tools properly. Always keep tools clean and in good working order. Store the miter saw stand in a
dry, secure place out of the reach of children. Inspect the tool for good working condition prior to storage and
before re-use.

These safety instructions can’t possibly warn of every scenario that may arise with this tool,

so always make sure to stay alert and use common sense during operation.

4