MODEL 73009
SERVICE CART
For replacement parts visit
WENPRODUCTS.COM
IMPORTANT:
Your new tool has been engineered and manufactured to WEN’s highest standards for dependability, ease
of operation, and operator safety. When properly cared for, this product will supply you years of rugged,
trouble-free performance. Pay close attention to the rules for safe operation, warnings, and cautions.
If you use your tool properly and for its intended purpose, you will enjoy years of safe, reliable service.
NEED HELP? CONTACT US!
Have product questions? Need technical support?
Please feel free to contact us at:
800-232-1195 (M-F 8am-5pm CST)
techsupport@wenproducts.com
WENPRODUCTS.COM
NOTICE: Please refer to wenproducts.com for the most up-to-date instruction manual.
TABLE OF CONTENTS
Specifications ......................................................................................2
Introduction ........................................................................................3
General Safety Rules ...........................................................................4
Know Your Service Cart .......................................................................5
Assembly ............................................................................................6
Exploded View & Parts List .................................................................8
Warranty Statement .............................................................................9
SPECIFICATIONS
Model Number
Maximum Capacity 500 lbs (evenly distributed)
Upper Tray Inner Dimensions
Lower Tray Inner Dimensions
Wheel Diameter
Casters
2
73009
30" L x 15" W x 2-7/8" H
29" L x 15" W x 2-7/8" H
4-7/8"
Two Fixed Wheels, Two Swivel Wheels
INTRODUCTION
Thanks for purchasing the WEN Service Cart. We know you are excited to put your tool to work, but
first, please take a moment to read through the manual. Safe operation of this tool requires that you
read and understand this operator’s manual and all the labels affixed to the tool. This manual provides
information regarding potential safety concerns, as well as helpful assembly and operating instructions
for your tool.
WARNING:
with them deserve your careful attention and understanding. Always follow the safety precautions
to reduce the risk of fire, electric shock and personal injury. However, please note that these
instructions and warnings are not substitutes for proper accident prevention measures.
NOTE: The following safety information is not meant to cover all possible conditions and situations
that may occur. WEN reserves the right to change this product and specifications at any time without
prior notice.
Keep this manual available to all users during the entire life of the tool and review it
Indicates danger, warning, or caution. The safety symbols and the explanations
frequently to maximize safety for both yourself and others.
3
GENERAL SAFETY RULES
Safety is a combination of common sense, staying alert, and knowing how your item works.
SAVE THESE SAFETY INSTRUCTIONS.
WARNING:
using this tool. Failure to follow all instructions listed below may result in personal injury and
tool damage.
1. READ and become familiar with this entire instruction manual. LEARN the tool’s applications,
limitations, and possible hazards.
2. KEEP WORK AREA CLEAN. Cluttered areas invite injuries and accidents.
3. OBSERVE work area conditions. Keep work area well lit.
4. ALWAYS keep your work area clean, uncluttered, and well lit. DO NOT work on floor surfaces that are
slippery with sawdust or wax.
5. STORE IDLE EQUIPMENT. When not in use, store the service cart in a safe and clean location.
Always secure products and keep out of reach of children.
6. USE THE RIGHT PRODUCT FOR THE JOB. There are certain applications for which this item was
designed. Do not modify it and do not use it for a purpose for which it was not intended.
7. CHECK FOR DAMAGED PARTS. Before using any product, any part that appears damaged should be
carefully checked to determine that it will operate properly and perform its intended function. Check for
any broken or damaged parts and any other conditions that may affect its operation. Replace or repair
damaged or worn parts immediately.
Read and understand all warnings, cautions and operating instructions before
8. WHEN SERVICING use only identical replacement parts and accessories. Using any other parts will
void the warranty.
9. DO NOT operate the tool if you are under the influence of drugs, alcohol, or medication that may
affect your ability to properly use the tool.
10. USE EYE PROTECTION. Always wear ANSI approved impact safety goggles.
11. DO NOT EXCEED THE PRODUCT’S MAXIMUM LOAD CAPACITY. Always keep weight evenly
distributed.
12. ONLY USE ON A FLAT SURFACE capable of supporting the item with its maximum capacity load. It
is easy to lose control if attempting to pull a load on a sloping or uneven surface.
13. DO NOT ALLOW CHILDREN TO PLAY ON, stand upon or climb on this item. It is not intended for
carrying people or animals.
14. ALWAYS CHECK HARDWARE and assembled parts after assembling. All connections should be
tight.
4
Loading...