Plate Compactor
For replacement parts visit
WENPRODUCTS.COM
IMPORTANT:
Your new tool has been engineered and manufactured to WEN’s highest standards for dependability,
ease of operation, and operator safety. When properly cared for, this product will supply you years
of rugged, trouble-free performance. Pay close attention to the rules for safe operation, warnings,
and cautions. If you use your tool properly and for intended purpose, you will enjoy years of safe,
reliable service.
bit.ly/WENvideo
NOTICE: Please refer to wenproducts.com for the most up-to-date instruction manual.
NEED HELP? CONTACT US!
Have product questions? Need technical support?
Please feel free to contact us at:
800-232-1195
(M-F 8AM-5PM CST)
techsupport@wenproducts.com
WENPRODUCTS.COM
TABLE OF CONTENTS
Identification
Service Record
Specifications
Introduction
Safety Information
Know Your Plate Compactor
Assembly
Preparation
Operation
Maintenance
Troubleshooting
Exploded View and Parts List
Warranty Statement
2
2
3
4
4
7
8
8
9
12
17
18
26
IDENTIFICATION
If assistance for information or service is required, please contact the Customer Service Help Line by calling
800-232-1195; customer will be asked to provide the following information when calling.
Record information in the spaces provided below and make sure to save your original purchase receipt.
MODEL NUMBERs: 56035, 56035T
DATE OF PURCHASE: ______________________________________________
PURCHASED FROM: ______________________________________________
ENGINE SERIAL NUMBER: _________________________________________
SERVICE RECORD
Record Service Dates:
Date Date Date Date Date Date
Change Oil
Change Spark Plug
Clean Fuel Tank
Clean Air Filter
NOTE: WE SUGGEST RUNNING YOUR PLATE COMPACTOR AT LEAST ONCE A
MONTH IN ORDER TO MAXIMIZE THE LIFESPAN OF THE PLATE COMPAC-
TOR
2
SPECIFICATIONS
Engine 212cc, 4 Stroke
Compaction Force 4496 lbs.
Plate Size 24 x 18 in.
Forward Travel Up to 82 Feet per Minute
Vibrations per Minute 5400
Dimensions 25 x 18.5 x 27.5 in.
Weight 207 lbs.
Compaction Pressure 1498.66 lb/ft²
Engine Type 4 stroke, OHV, single cylinder with forced air cooling system
Spark Plug Gap 0.6 - 0.8 mm (0.023 - 0.031 in)
Ignition System Non-contact transistor
Displacement 212cc
Fuel Tank Capacity 1 Gallon
Engine Oil Capacity 20 fl. oz (0.6 L)
Spark Plug F6TC
NOTE: To prevent pavers from breaking or marring, we recommend using the WEN
56035-047 Construction Zone Plate Compactor Pad.
3
INTRODUCTION
Thank you for purchasing a WEN Plate Compactor. This manual provides information regarding the safe operation and maintenance of this product. Every effort has been made to ensure the accuracy of the information in this
manual. WEN reserves the right to change this product, manual and specifications at any time without notice.
Please keep this manual available to all users during the entire life of the plate compactor.
This manual contains special messages to bring attention to potential safety concerns as well as helpful
operating and servicing information. Please read all the information carefully to avoid personal injury
and machine damage.
QUESTIONS? PROBLEMS?
In order to answer questions and solve problems in the most efficient and speedy manner, contact Customer
Service at (800) 232-1195, M-F 8-5 CST or email techsupport@wenproducts.com.
NOTICE REGARDING EMISSIONS
Engines certified to comply with U.S. EPA emission regulations for SORE (Small Off Road Equipment) can be
operated on regular unleaded gasoline and may include the following emission control systems: (EM) Engine
Modifications and (TWC) Three-Way Catalyst (if so equipped).
SAFETY INFORMATION
Before operating this plate compactor read and observe all warnings, cautions, and instructions both on the labels
and in this owner’s manual.
NOTE: The following safety information is not meant to cover all possible conditions and situations that may occur.
This safety alert symbol is used to identify safety information about hazards that can result in personal injury.
A signal word (DANGER, WARNING, or CAUTION) is used with the alert symbol to indicate the likelihood and the potential severity of injury. In addition, a hazard symbol may be used to represent the type
of hazard.
DANGER indicates a hazard, which, if not avoided, will result in death or serious injury.
WARNING indicates a hazard, which, if not avoided, could result in death or serious injury.
CAUTION indicates a hazard, which, if not avoided, might result in minor or moderate injury.
CAUTION when used without the alert symbol, indicates a situation that could result in damage to the engine or
plate compactor.
4
SAFETY INFORMATION
For any questions regarding the hazard and safety notices listed in this manual or on the product, please call (800)
232-1195 M-F 8-5 CST before using the plate compactor.
DANGER: CARBON MONOXIDE
Using a plate compactor indoors CAN KILL YOU IN MINUTES. Engine exhaust contains carbon monoxide
(CO). This is a poison gas you cannot see or smell. If you can smell the engine exhaust, you are breathing CO.
But even if you cannot smell the exhaust, you could be breathing CO.
NEVER use a plate compactor inside homes, garages, crawl spaces, or other partially/fully enclosed areas. Deadly
levels of carbon monoxide can build up in these areas. Using a fan or opening windows and doors does NOT
supply enough fresh air. ONLY use outside and far away from windows, doors, and vents. These openings can
pull in engine exhaust.
Even if you use an engine correctly, CO may leak into the home. ALWAYS use a battery-powered or batterybackup CO alarm in the home. If you start to feel sick, dizzy, or weak after the engine has been running, move to
fresh air RIGHT AWAY. See a doctor. You may have carbon monoxide poisoning.
WARNING: The exhaust from this product contains chemicals known to the State of California to
cause cancer, birth defects, or other reproductive harm.
WARNING: This engine may emit highly flammable and explosive gasoline vapors, which can cause
severe burns or even death if ignited. A nearby open flame can lead to explosion even if it isn’t directly
in contact with gasoline.
SAFETY RULES:
1) Do not operate near open flame.
2) Do not smoke near the plate compactor.
3) Always turn the plate compactor off before refueling. Allow it to cool for at least 2 minutes before removing fuel
cap. Loosen cap slowly to relieve pressure in tank.
4) Do not overfill fuel tank. Gasoline may expand during operation. Do not fill to the top of the tank. Allow for
expansion.
5) Always check for spilled fuel before operating.
6) Empty fuel tank before storing or transporting the plate compactor.
7) Do not use in rainy conditions.
8) Do not allow children or non-qualified persons to operate the plate compactor.
9) Do not touch hot surfaces. Pay attention to warning labels on the machine identifying hot parts.
10) Allow unit to cool down after use before touching engine or areas of the plate compactor that become hot during use.
5
SAFETY INFORMATION
11) Only use the plate compactor for its intended purposes.
12) Operate only on dry, level surfaces.
13) Turn the engine switch to “OFF” position when the engine is not running.
14) Do not operate or service this machine before reading the entire manual.
15) Never operate this equipment without proper protective clothing, shatterproof ANSI-approved glasses, steeltoed boots, and other protective job site devices.
16) Never operate this equipment while under the influence of drugs or alcohol or while feeling fatigued or ill.
17) Always check the machine for loosened threads or bolts before starting.
18) Always wear proper respiratory, hearing and eye protection during operation.
19) Manufacturer does not assume responsibility for any accident due to equipment modifications and will also
void the warranty.
20) Never use accessories or attachments that are not recommended by WEN for this model of plate compactor.
21) DO NOT add fuel to the plate compactor if it is placed on top of a plastic surface such as a pickup truck bed
with a plastic liner. This creates the possibility of ignition or explosion due to static electricity buildup.
22) Always refuel in well-ventilated areas. Never operate near open flames, sparks or any other item that could
cause the fumes of the gasoline to ignite.
23) Before performing compacting work near buildings or above pipelines, check the effect of the vibrations on
the buildings and pipelines. If necessary, immediately stop the compacting work.
CAUTION: Misuse of this unit can damage it or shorten its life.
WARNING: This unit produces heat when running. Temperatures near exhaust can exceed 1500 F
(650 C).
SAVE THESE INSTRUCTIONS – This manual contains important instructions for the WEN Plate Compactor
that should be followed during installation and maintenance. If items are damaged, have them repaired or replaced as necessary. Do not operate if you notice signs of damage such as broken or cracked insulation.
NOTE: We suggest running your engine at least once a month in order to maximize the lifespan of the plate
compactor.
6
KNOW YOUR PLATE COMPACTOR
Use the illustration below to become familiar with the locations and functions of the various
components and controls of this plate compactor.
2
3
4
1
5
6
7
8
14
13
1. Muffler
2. Handle
3. Throttle
4. Gas Tank Cap
9
10
11
12
Direction of Travel
8. Recoil Starter Handle
9. Choke
10. Fuel Valve
11. Lifting Handle
5. Gas Tank
6. Air Cleaner
7. Engine Switch
12. Base
13. Carburetor
14. Oil Cap
7
ASSEMBLY
In order to best protect the plate compactor while in the package, this product comes with some components
disassembled. Please complete the following assembly step before proceeding to use the plate compactor.
If after reading this section, you are unsure about how to perform any of the steps, please call 800-232-1195 (M-F
8-5 CST)
WARNING: This plate compactor is heavy. Some procedures may require lifting equipment or two
people.
HANDLE ASSEMBLY:
The Plate Compactor is shipped with the lower handle already assembled and attached to the plate.
To complete the handle assembly, loosen the knobs in the middle of the handle and swing the upper handle into
place.
Next, insert the bolt, washer and nut into the hole directly above the plastic knob. Tighten the nut and the plastic
knob.
Repeat the process on the other side of the handle.
ENGINE OIL RECOMMENDATIONS
CAUTION: Air cooled engines run hot-
ter than automotive engines. The use of
non-synthetic multi-viscosity oils (5W-30,
10W-30, etc.) in temperatures above 40°
F will result in higher than normal oil consumption. When using a multi-viscosity
oil, check the oil level more frequently
than you would otherwise.
Fig. 1
1
PREPARATION
STEP 1 - FILL OIL:
The plate compactor is shipped without oil. User must add the
proper amount of oil before operating the plate compactor for the
first time. The oil capacity of the engine crankcase is 20 fl. oz (0.6 L).
Select good quality detergent oil bearing the American Petroleum Institute (API) service classifications SJ, SL, or SM (synthetic oils may
be used). Use the ASE viscosity grade of oil from the following chart
(Fig. 1) that matches the starting temperature anticipated before the
next oil changes.
FILLING CRANKCASE WITH OIL:
1. Make sure the plate compactor is on a level surface. Tilting the
plate compactor to assist in filling will cause oil to flow into engine
areas and will cause damage. Keep plate compactor level!
2. Remove the oil filler/dipstick cap (Fig. 2 - 1) from the engine.
3. Using a funnel, add the appropriate type and amount of oil into
the crankcase. The crankcase is full when the oil level has reached
the second thread from the lip of the opening (Fig. 3, next page).
WARNING: This plate compactor may emit highly flammable and explosive gasoline vapors, which can
cause severe burns or even death if ignited. A nearby open flame can lead to explosion even if not directly
in contact with gasoline.
8
Fig. 2
4. Check for oil leaks. Reinstall oil filler cap before starting engine.
Loading...