Wells Manufacturing RCP-7100, RCP-200, RCP-7200, RCP-300, RCP-7300 Operation Manual

Model RCP-200

WELLS BLOOMFIELD, LLC

2 ERIK CIRCLE, P. O. Box 280 Verdi, NV 89439

telephone: [phone]

fax: [phone]

www.wellsbloomfield.com

OPERATION MANUAL

RCP-Series

DROP-IN

REFRIGERATED

COLD PANS

MODELS
RCP-100 RCP-7100
RCP-200 RCP-7200
RCP-300 RCP-7300
RCP-400 RCP-7400
RCP-500 RCP-7500
RCP-600 RCP-7600

INSTALLATION

USE & CARE

405

Includes

IMPORTANT: DO NOT DISCARD THIS MANUAL

This manual is considered to be part of the appliance and is to be given to the OWNER or
MANAGER of the restaurant, or to the person responsible for TRAINING OPERATORS of

this appliance. Additional manuals are available from your WELLS DEALER.

THIS MANUAL MUST BE READ AND UNDERSTOOD BY ALL PERSONS U S ING OR

INSTALLING THIS APPLIANCE. Contact your WELLS DEALER if you have any

questions concerning installation, operation or maintenance of this equipment.

PRINTED IN UNITED STATES OF AMERICA

p/n 305101 Rev. D ECN-13538 M405 080915 cps

LIMITED WARRANTY STATEMENT

All commercial cooking equipment manufactured by
WELLS BLOOMFIELD, LLC is warranted against defects in
materials and workmanship for a period of one year from the
date of original installation, or 18 months from the date of
shipment from our factory, whichever comes first, and is for
the benefit of the original purchaser only, except that;
with respect to cold/refrigerated products, warranty labor
is limited to 90 days after installation. Extended warranty
for labor and compressor are available at time of sale.
Contact factory Sales Department for details.

THE FOREGOING OBLIGATION IS EXPRESSLY GIVEN
IN LIEU OF ANY OTHER WARRANTIES, INCLUDING ANY
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR
ANY PARTICULAR PURPOSE, WHICH ARE HEREBY
EXCLUDED.

WELLS SHALL NOT BE LIABLE FOR INDIRECT,
INCIDENTAL OR CONSEQUENTIAL DAMAGES OR
LOSSES FROM ANY CAUSE WHATSOEVER.

This warranty is void if it is determined that, upon inspection
by an authorized service agency, the equipment has been
modified, misused, misapplied, improperly installed, or
damaged in transit or by fire, flood or act of God.

This warranty also does not apply if the serial nameplate has
been removed, or if service is performed by unauthorized
personnel.
The prices charged by Wells Bloomfield for its products are
based upon the limitations in this warranty. Seller’s
obligation under this warranty is limited to the repair of
defects without charge by a Wells Bloomfield factory
authorized service agency or one of its sub-service
agencies. This service will be provided on customer’s
premises for non-portable models. Portable models
(a device with a cord and plug) must be taken or shipped
to the closest authorized service agency, transportation
charges prepaid, for service. In addition to restrictions
contained in this warranty, specific limitations are shown in
the Service Policy and Procedure Guide. Wells Bloomfield
authorized service agencies are located in principal cities.
This warranty is valid in the United States and Canada and
void elsewhere. Please consult your classified telephone
directory, your foodservice equipment dealer or, for
information and other details concerning warranty, contact:

Service Department, Wells Bloomfield, LLC

P.O. Box 280, Verdi, Nevada 89439

phone [phone] or fax [phone]

SERVICE POLICY AND PROCEDURE GUIDE and ADDITIONAL WARRANTY EXCLUSIONS

1. Resetting of safety thermostats, circuit breakers, over
load protectors, and/or fuse replacements are not
covered by this warranty unless warranted conditions
are the cause.

2. All problems due to operation at voltages or phase
other than specified on equipment nameplates are
not covered by this warranty.
Conversion to correct voltage and/or phase must be
the customer’s responsibility.

3. All problems due to electrical connections not made

in accordance with electrical code requirements
and wiring diagrams supplied with the equipment are

not covered by this warranty.

4. Replacement of items subject to normal wear, to
include such items as knobs, light bulbs; and, normal
maintenance functions including adjustments of
thermostats, adjustment of micro switches and
replacement of fuses and indicating lights are not
covered by warranty.

5. Damage to electrical cords and/or plug due to exposure

to excessive heat are not covered by this warranty.

6. Full use, care, and maintenance instructions supplied
with each machine. Noted maintenance and

preventative maintenance items, such as servicing and

cleaning schedules, are customer responsibility. Those
miscellaneous adjustments noted are customer
responsibility. Proper attention to preventative
maintenance and scheduled maintenance procedures
will prolong the life of the appliance.

7. Travel mileage is limited to sixty (60) miles from an
Authorized Service Agency or one of its sub-service
agencies.

8. All labor shall be performed during regular working
hours. Overtime premium will be charged to the buyer.

9. All genuine Wells replacement parts are warranted for
ninety (90) days from date of purchase on non­warranty equipment. This parts warranty is limited only
to replacement of the defective part(s). Any use of

non-genuine Wells parts completely voids any

warranty.

10. Installation, labor, and job check-outs are not

considered warranty and are thus not covered by this
warranty.

11. Charges incurred by delays, waiting time or operating

restrictions that hinder the service technician’s ability to
perform service are not covered by warranty. This
includes institutional and correctional facilities.

405 p/n 305101 OpM RCP Refrigerated Cold Pans

SHIPPING DAMAGE CLAIM PROCEDURE

NOTE: For your protection, please note that equipment in

this shipment was carefully inspected and packaged by
skilled personnel before leaving the factory. Upon
acceptance of this shipment, the transportation company
assumes full responsibility for its safe delivery.
IF SHIPMENT ARRIVES DAMAGED:

1. VISIBLE LOSS OR DAMAGE: Be certain that any

visible loss or damage is noted on the freight bill or
express receipt, and that the note of loss or damage is
signed by the delivery person.

2. FILE CLAIM FOR DAMAGE IMMEDIATELY:
Regardless of the extent of the damage.

3. CONCEALED LOSS OR DAMAGE: if damage is
unnoticed until the merchandise is unpacked, notify the
transportation company or carrier immediately, and file
“CONCEALED DAMAGE” claim with them. This
should be done within fifteen (15) days from the date
the delivery was made to you. Be sure to retain the
container for inspection.

Wells Bloomfield cannot assume liability for damage or loss
incurred in transit. We will, however, at your request, supply
you with the necessary documents to support your claim.

xi

TABLE OF CONTENTS

WARRANTY xi
SPECIFICATIONS
FEATURES & OPERATING CONTROLS 2
PRECAUTIONS & GENERAL INFORMATION 3
AGENCY LISTING INFORMATION 3
INSTALLATION 4
OPERATION 6
CLEANING INSTRUCTIONS 8
TROUBLESHOOTING SUGGESTIONS 9
MAINTENANCE INSTRUCTIONS 10
PARTS & SERVICE 13
CUSTOMER SERVICE DATA 13

INTRODUCTION

Thank You for purchasing this Wells Bloomfield appliance.

Proper installation, professional operation and consistent maintenance of this appliance will ensure that
it gives you the very best performance and a long, economical service life.

This manual contains the information needed to properly install this appliance, and to use and care for
the appliance in a manner which will ensure its optimum performance.

MODEL HP

RCP-100
RCP-200

RCP-300
RCP-7100
RCP-7200

RCP-400
RCP-7300

RCP-500

RCP-600
RCP-7400

405 p/n 305101 OpM RCP Refrigerated Cold Pans

RCP-7500
RCP-7600

ELECTRICAL & REFRIGERATION SPECIFICATIONS

AMPS 120VAC 1ø REFRIGERANT

TOTAL MCA MFS LRA TYPE AMT. HIGH LOW

1/4 5.5 8 15 38 R-134a 28 oz. 440 162 NEMA 5-15P

1/3 7.0 11 15 29 R-404a 24 oz. 500 174 NEMA 5-15P

1/2 7.5 12 15 33 R-404a 32 oz. 500 174 NEMA 5-15P

3/4 15.3 21 30 59 R-404a 54 oz. 500 174 NEMA 5-20P

PRESSURE

(psig)

POWER

SUPPLY

CORD

1

FEATURES & OPERATING CONTROLS

NOTE:

This is a general arrangement drawing only. Actual component positions may vary between units.

2

405 p/n 305101 OpM RCP Refrigerated Cold Pans

PRECAUTIONS AND GENERAL INFORMATION

This appliance is intended for use in commercial establishments
only, and is intended
consumption. No other use is
manufacturer or its agents.

Operators of this appliance must be familiar with the appliance use,
limitations and associated restrictions. Operating instructions must be
read and understood by all persons using or installing this appliance.

Food must be kept in appropriate inserts. Never place food directly
into the tank.

Cleanliness of this appliance is essential to good sanitation. Read and
follow all included cleaning instructions and schedules to ensure the
safety of the food product.

Disconnect this appliance from electrical power before performing any
maintenance or servicing.

This appliance is not jet stream approved. Do not direct water jet or
steam jet at this appliance, or at any control panel or wiring. Do not
splash or pour water on, in or over any controls, control panel or wir­ing. Do not wash floor around this appliance with water or steam jet.

The technical content of this manual, including any wiring diagrams,
schematics, parts breakdown illustrations and/or adjustment
procedures, is intended for use by qualified technical personnel.

Any procedure which requires the use of tools must be performed by a
qualified technician.

This manual is considered to be a permanent part of the appliance.
This manual and all supplied instructions, diagrams, schematics, parts
breakdown illustrations, notices and labels must remain with the
appliance if it is sold or moved to another location.

This appliance is made in the USA. Unless otherwise noted, this
appliance has American sizes on all hardware.

to hold pre-chilled prepared food for human

recommended or authorized by the

WARNING:

ELECTRIC
SHOCK HAZARD

All servicing requiring
access to non-insulated
electrical components
must be performed by a
factory authorized
technician.
DO NOT open any access
panel which requires the
use of tools. Failure to
follow this warning can
result in severe electrical

shock.

CAUTION:

RISK OF

DO NOT connect or
energize this appliance
until all installation
instructions are read and
followed. Damage to the
appliance will result if
these instructions are not
followed.

DAMAGE

405 p/n 305101 OpM RCP Refrigerated Cold Pans

3

AGENCY LISTING INFORMATION

STD 4

STD 7

UL471

This appliance is performance tested to NSF Standard 4 for holding hot
foods. This appliance conforms to NSF Standard 4 for sanitation only if

installed in accordance with the supplied Installation Instructions and

maintained according to the instructions in this manual.

This appliance performance tested to NSF Standard 7 for storage of
potentially hazardous foods. This appliance meets NSF Standard 7
only when pan rails are installed in the lowest position.

RCP units are ETL listed for US and Canada

RCP units are evaluated to UL standard 471.

Components used in the manufacture of this unit are Underwriters
Laboratory recognized.

4

405 p/n 305101 OpM RCP Refrigerated Cold Pans