Now is the right time to complete the information below for your
permanent record. Use a typewriter or print clearly. You will also
need this Quick Reference when contacting Wells Cargo or a Wells
Cargo Dealership regarding your Warranty , Service, Repair, or
Replacement parts.
(Feed this side if using a typewriter)
DATE PURCHASED ___________________ 20 ___________
SERIAL NUMBER _____________________________________
MODEL NUMBER ____________________________________
KEY LOCK NUMBER __________________________________
If you believe that your vehicle has a defect which could
cause a crash or could cause injury or death, you should
immediately inform the National Highway Traffic Safety
Administration (NHTSA) in addition to notifying Wells
Cargo, Inc. If NHTSA receives similar complaints, it may
open an investigation, and if it finds that a safety defect
exists in a group of vehicles, it may order a recall and
remedy campaign. However, NHTSA cannot become
involved in individual problems between you, your dealer,
or Wells Cargo, Inc. To contact NHTSA, you may either call
the Auto Safety Hotline toll-free at 1-800-424-9393
(or 366-0123 in Washington, DC area) or write to:
NHTSA
U.S. DEPARTMENT of TRANSPORTATION
You can also obtain other information about motor vehicle
safety from the Hotline.
th
400 7
Street SW (NSA-11)
Washington, DC 20590
2
Wells Cargo Owner’s Manual
WITH A WELLS CARGO BEHIND . . . YOU NEVER LOOK BACK!
Jeffrey M. Wells
President
Wells Cargo, Inc.
We hear it all the time, “My Wells Cargo pulls so well,
I can hardly tell it’s there.” There’s a reason why a Wells
Cargo delivers such smooth towing and stable handling. We
build them better! Experience makes a difference, and our
experience is unmatched in the industry. Since 1954, we’ve
combined State-of-the Art Design with the best materials
available to manufacture our trailers.
There’s another reason for our slogan, “With a Wells CargoBehind . . . You Never Look Back!” We never want you to
“look back” or second guess your decision to buy a Wells
Cargo trailer. That’s why we support you with a 6-Year
Warranty Program that
really works for you.
Wells Cargo Owner’s Manual
ABOUT THIS MANUAL . . . DEALERS & SERVICE
3
OUR PRODUCT
Wells Cargo builds ball coupler and
gooseneck trailers in several basic
configurations. Most trailers we
build are customized on our
production lines by the inclusion of
one or several optional features as
specified by the dealer or customer.
The list of options runs into the
hundreds of possible combinations.
THIS MANUAL
This manual covers only the basic
trailer and standard components.
Information and warranty details
for any optional equipment are
available from Wells Cargo or any
Wells Cargo Dealer.
WELLS CARGO DEALER
Authorized Wells Cargo Dealers are
responsible business people who
have lengthy backgrounds in cargo
trailers. They have in depth
knowledge about trailer construction,
job specifications and proper
applications of specific models.
They’re equipped to handle your
service effectively and efficiently.
NA TIONAL
SERVICE NETWORK
Wells Cargo has manufacturing
facilities in Phoenix, Arizona;
Waycross, Georgia; Elkhart, Indiana;
W aco, Texas; Ogden, Utah; and
Carbondale, Pennsylvania. Each
manufacturing plant operates a
Customer Service Facility. With the
additional Service Facilities at
hundreds of Authorized Wells
Cargo Dealerships nationwide you
are never far from a convenient
location for service work anywhere
you travel.
IMPORTANT:
We urge you to become familiar
with the contents of this manual.
Following the basic directions is your
key to the safe operation of your
Wells Cargo Trailer. It is also the
best way to ensure that you keep
the full protection of your
Warranty.
CALL 1-800-348-7553
For Nearest Location or Any
Other Questions
4
Wells Cargo Owner’s Manual
LABELS - INSTRUCTIONS - WARNINGS
Check your new Wells Cargo trailer for Instructional & Warning Labels like
the ones listed below. Many are mandated by the Federal Government and
others will help you in proper and safe operation. If decals become faded
or damaged to the point where they are unreadable, please contact Wells
Cargo for replacement. The information below is included in the event a
label is missing.
Located At Lift-Up Nose Cone
®
NOTICE
LUBRICATE ALL PIVOT POINTS WITH
SAE 30 WEIGHT OIL A MINIMUM OF
TWO TIMES PER YEAR
WARNING
BE SURE TO
Connect Appliance First
At Propane or
Natural Gas Appliance
At Ride-In Entry
i.e. Snowmobiles, Motorcycles
and check before you
connect gas bottles to line.
APPLIANCES ARE NOT
CONNECTED AT
FACTO RY
Law requires that
an authorized competent
service man ONLY can complete
this installation.
CAUTION - LOW CLEARANCE
At Transfer Switch or Junction Box At Transfer Switch or Junction Box
GENERA T OR CIRCUIT . THIS
CONNECTION IS FOR
GENERATORS RA TED
110-125 VOL T AC,
60HZ ______AMPERES
MAXIMUM.
AIR COND. CIRCUIT. THIS
CONNECTION IS FOR
AIR CONDITIONER RA TED
110-125 VOL T AC.
60HZ ______AMPERES
MAXIMUM
Wells Cargo Owner’s Manual
LABELS - INSTRUCTIONS - WARNINGS
At Ramp Doors
5
At Outside Power Supply Connection
THIS CONNECTION FOR
120/240 V OL T,
3-POLE, 4 WIRE,
60 HERTZ,
50
AMPERE SUPPLY
At Outside Power Supply Connection
FOR 110/125 VOLT, AC
60 HZ.30
AMPERE SUPPLY.
Located with Customer Information Papers
WARNING — EXTREME — DANGER
The “RAMP-HEISTER” torsion spring assembly has been carefully selected
and installed by the manufacturer of this trailer. It has been designed to
counterbalance the weight transferred when opening and closing the
entrance ramp. The entire torsion spring assembly , mounting hardware and
cables are loaded with tremendous energy. Repairs or adjustments by
inexperienced persons or without proper tools is hazardous and could
cause severe personal injury or death. Do not attempt to remove or repair any
door components, hardware or the structure that these components are
attached to. Periodic inspection or the entire assembly, to include but not
be limited to, cable wear, fastener integrity and proper lubrication, is required. ALL REP AIR S OR ADJ USTMENTS MUST BE PERFORMED BY EXPE-
RIEN CE D DOOR SER VICE PERSONNEL ONLY!
WARNING — EXTREME — DANGER
CAUTION
DO NOT ST AND
UNDER DOOR WHEN
RAISING & LOWERING
Located at Breakaway
Switch Test Light
PULL PI N TO TEST
LIGHT INDICATES
BATTERY O.K.
6
Wells Cargo Owner’s Manual
LABELS - INSTRUCTIONS - WARNINGS
Federal I.D. Plate - Mounted on Front Wall of Trailer
Manufacturers I.D. Plate - Mounted Road Side Lower Front Corner
SINCE 1954
DESIGN PROTECTED BY TRADEMARK LAW
Mounted on Front Header (where applicable)
ELKHART, IN
WAYCROSS, GA
WACO, TX
OGDEN, UT
PHOENIX, AZ
CARBONDALE, PA
TELEPHONE: 1-800-348-7553
THIS FRAME PATENTED
BY THE FOLLOWING
U.S. PATENT NO.
3,287,058
Wells Cargo Owner’s Manual
LABELS - INSTRUCTIONS - WARNINGS
Aluminum Roof Rack Cross Bars
MAXIMUM WEIGHT 50 LBS
For trailers with rear spotting hitches. Primarily for Cable Splicing trailers.
REAR HITCH ASSEMBLY NOT TO BE
USED FOR TOWING PURPOSES.
FOR PLACEMENT ONLY!
At Trailer Sidewall above Corner Post Jacks
7
STABILIZING JACK
2000 LB. STATIC LO AD
Ball Hitch Instruction and Warnings
STABILIZING JACK
3000 LB. STATIC LO AD
Loading...
+ 19 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.