WELLS BLOOMFIELD, LLC
2 ERIK CIRCLE, P. O. Box 280 Verdi, NV 89439
telephone: 775-689-5703
fax: 775-689-5976
www.wellsbloomfield.com
OPERATION MANUAL
MODEL
TCW-Series
TCWN-Series
TORTILLA CHIP
046
&
TCW-2 Standard Tortilla Chip Warmer
TCWN-1 Narrow Tortilla Chip Warmer
IMPORTANT: DO NOT DISCARD THIS MANUAL
This manual is considered to be part of the appliance and is to be given to the OWNER or
MANAGER of the restaurant, or to the person responsible for TRAINING OPERATORS of
this appliance. Additional manuals are available from your WELLS DEALER.
THIS MANUAL MUST BE READ AND UNDERSTOOD BY ALL PERSONS U S ING OR
INSTALLING THIS APPLIANCE. Contact your WELLS DEALER if you have any
questions concerning installation, operation or maintenance of this equipment.
WARMERS
Includes
INSTALLATION
USE & CARE
PRINTED IN UNITED STATES OF AMERICA
p/n 307033 Rev. B ECN-13371 M046 071025 cps
LIMITED WARRANTY STATEMENT
Unless otherwise specified, all commercial cooking
equipment manufactured by WELLS BLOOMFIELD, LLC is
warranted against defects in materials and workmanship for
a period of one year from the date of original installation or
18 months from the date of shipment from our factory,
whichever comes first, and is for the benefit of the original
purchaser only.
THIS WARRANTY IS THE COMPLETE AND ONLY
WARRANTY, EXPRESSED OR IMPLIED IN LAW OR IN
FACT, INCLUDING BUT NOT LIMITED TO, WARRANTIES
OF MERCHANTABILITY OR FITNESS FOR ANY
PARTICULAR PURPOSE, AND/OR FOR DIRECT,
INDIRECT OR CONSEQUENTIAL DAMAGES IN
CONNECTION WITH WELLS BLOOMFIELD PRODUCTS.
This warranty is void if it is determined that, upon inspection
by an authorized service agency, the equipment has been
modified, misused, misapplied, improperly installed, or
damaged in transit or by fire, flood or act of God. It also
does not apply if the serial nameplate has been removed, or
if service is performed by unauthorized personnel. The
prices charged by Wells Bloomfield for its products are
based upon the limitations in this warranty. Seller’s
obligation under this warranty is limited to the repair of
defects without charge by a Wells Bloomfield factory
authorized service agency or one of its sub-service
agencies. This service will be provided on customer’s
premises for non-portable models. Portable models (a
device with a cord and plug) must be taken or shipped to
the closest authorized service agency, transportation
charges prepaid, for service. In addition to restrictions
contained in this warranty, specific limitations are shown in
the Service Policy and Procedure Guide. Wells Bloomfield
authorized service agencies are located in principal cities.
This warranty is valid in the United States and Canada and
void elsewhere. Please consult your classified telephone
directory, your foodservice equipment dealer or contact:
Service Department, Wells Bloomfield, LLC
P.O. Box 280, Verdi, Nevada 89439
phone (775) 689-5707 or fax (775) 689-5976
for information and other details concerning warranty.
SERVICE POLICY AND PROCEDURE GUIDE and ADDITIONAL WARRANTY EXCLUSIONS
1. Resetting of safety thermostats, circuit breakers, over
load protectors, and/or fuse replacements are not
covered by this warranty unless warranted conditions
are the cause.
2. All problems due to operation at voltages or phase
other than specified on equipment nameplates are
not covered by this warranty.
Conversion to correct voltage and/or phase must be
the customer’s responsibility.
3. All problems due to electrical connections not made
in accordance with electrical code requirements
and wiring diagrams supplied with the equipment are
not covered by this warranty.
4. Replacement of items subject to normal wear, to
include such items as knobs, light bulbs; and, normal
maintenance functions including adjustments of
thermostats, adjustment of micro switches and
replacement of fuses and indicating lights are not
covered by warranty.
5. Damage to electrical cords and/or plug due to exposure
to excessive heat are not covered by this warranty.
6. Full use, care, and maintenance instructions supplied
with each machine. Noted maintenance and
preventative maintenance items, such as servicing and
cleaning schedules, are customer responsibility. Those
miscellaneous adjustments noted are customer
responsibility. Proper attention to preventative
maintenance and scheduled maintenance procedures
will prolong the life of the appliance.
7. Travel mileage is limited to sixty (60) miles from an
Authorized Service Agency or one of its sub-service
agencies.
8. All labor shall be performed during regular working
hours. Overtime premium will be charged to the buyer.
9. All genuine Wells replacement parts are warranted for
ninety (90) days from date of purchase on nonwarranty equipment. This parts warranty is limited only
to replacement of the defective part(s). Any use of
non-genuine Wells parts completely voids any
warranty.
10. Installation, labor, and job check-outs are not
considered warranty and are thus not covered by this
warranty.
11. Charges incurred by delays, waiting time or operating
restrictions that hinder the service technician’s ability to
perform service are not covered by warranty. This
includes institutional and correctional facilities.
046 p/n 307033 OpM Tortilla Chip Warmer
SHIPPING DAMAGE CLAIM PROCEDURE
NOTE: For your protection, please note that equipment in
this shipment was carefully inspected and packaged by
skilled personnel before leaving the factory. Upon
acceptance of this shipment, the transportation company
assumes full responsibility for its safe delivery.
IF SHIPMENT ARRIVES DAMAGED:
1. VISIBLE LOSS OR DAMAGE: Be certain that any
visible loss or damage is noted on the freight bill or
express receipt, and that the note of loss or damage is
signed by the delivery person.
2. FILE CLAIM FOR DAMAGE IMMEDIATELY:
Regardless of the extent of the damage.
3. CONCEALED LOSS OR DAMAGE: if damage is
unnoticed until the merchandise is unpacked, notify the
transportation company or carrier immediately, and file
“CONCEALED DAMAGE” claim with them. This
should be done within fifteen (15) days from the date
the delivery was made to you. Be sure to retain the
container for inspection.
Wells Bloomfield cannot assume liability for damage or loss
incurred in transit. We will, however, at your request, supply
you with the necessary documents to support your claim.
xi
TABLE OF CONTENTS
WARRANTY xi
SPECIFICATIONS 1
FEATURES & OPERATING CONTROLS 2
PRECAUTIONS & GENERAL INFORMATION 3
AGENCY LISTING INFORMATION 3
INSTALLATION 4
OPERATION 6
CLEANING INSTRUCTIONS 7
TROUBLESHOOTING SUGGESTIONS 8
PARTS & SERVICE 9
CUSTOMER SERVICE DATA 9
INTRODUCTION
Thank You for purchasing this Wells Bloomfield appliance.
Proper installation, professional operation and consistent maintenance of this appliance will ensure that it
gives you the very best performance and a long, economical service life.
This manual contains the information needed to properly install this appliance, and to use and care for the
appliance in a manner which will ensure its optimum performance.
SPECIFICATIONS
MODEL VOLTS 1ø WATTS AMPS POWER SUPPLY CORD
120 700 5.8
120 1400 11.7
NEMA 5-15P
120 700 5.8
120 1400 11.7
046 p/n 307033 OpM Tortilla Chip Warmer
TCW-1
TCW-2
TCWN-1
TCWN-2
1
FEATURES & OPERATING CONTROLS
MOUNTING STUD
BAFFLE
INSIDE WARMER CAVITY
(STANDARD WARMER)
HEATING ELEMENT
FAN
HUMIDITY
CONTROL VENT
PRODUCT PAN
REMOVABLE
DRAWER
TCW-SERIES
TCWN-SERIES
ADJUSTABLE LEG
MOUNTING STUD
BAFFLE
FIXED ROLLERS
THERMOMETER
TEMPERATURE CONTROL
POWER SWITCH
INSIDE WARMER CAVITY
(NARROW WARMER)
REAR WALL
THERMOMETER
BULB
TEMP SENSOR
BULB
HEATING ELEMENT
046 p/n 307033 OpM Tortilla Chip Warmer
FAN
TEMP SENSOR
BULB
THERMOMETER
BULB
POWER
CORD
TCW– and TCWN-Series Features and Operating Controls
2
RIGHT SIDE WALL
REMOVABLE GLIDES
FEATURES & OPERATING CONTROLS (continued)
This appliance is intended for use in commercial establishments
only.
This appliance is intended
serving temperature for human consumption. No other use is
recommended or authorized by the manufacturer or its agents.
Operators of this appliance must be familiar with the appliance use,
limitations and associated restrictions. Operating instructions must be
read and understood by all persons using or installing this appliance.
Cleanliness of this appliance is essential to good sanitation. Read and
follow all included cleaning instructions and schedules to ensure the
safety of the food product.
Disconnect this appliance from electrical power before performing any
maintenance or servicing.
This appliance is not jet stream approved. Do not direct water jet or
steam jet at this appliance, or at any control panel or wiring. Do not
splash or pour water on, in or over any control or wiring. Do not wash
floor around this appliance with water or steam jet.
Exposed surfaces of this appliance can be hot to the touch and may
cause burns.
Heaters will be very hot when in use. Contact will cause severe injury.
Do not operate this appliance if the control panel is damaged. Do not
operate this appliance if the keypad section of the control panel is torn
or broken. Call your Authorized Wells Service Agent for service.
The technical content of this manual, including any wiring diagrams,
schematics, parts breakdown illustrations and/or adjustment
procedures, is intended for use by qualified technical personnel.
Any procedure which requires the use of tools must be performed by a
qualified technician.
This manual is considered to be a permanent part of the appliance.
This manual and all supplied instructions, diagrams, schematics, parts
breakdown illustrations, notices and labels must remain with the
appliance if it is sold or moved to another location.
to hold previously prepared food at
WARNING:
ELECTRIC
All servicing requiring access
to non-insulated electrical
components must be
performed by a factory
authorized technician.
DO NOT open any access
panel which requires the use
of tools. Failure to follow this
warning can result in severe
electrical shock.
SHOCK HAZARD
CAUTION:
RISK OF
DO NOT connect or energize
this appliance until all
installation instructions are
read and followed. Damage
to the appliance will result if
these instructions are not
followed.
DAMAGE
CAUTION:
HOT SURFACE
Exposed surfaces can be hot
to the touch and may cause
burns.
046 p/n 307033 OpM Tortilla Chip Warmer
This appliance conforms to ANSI/NSF Standard 4 for sanitation only if
installed in accordance with the supplied Installation Instructions and
operated and maintained according to the instructions in this manual.
This appliance is
This appliance is Listed under UL File E6070.
Listed under UL File E6070.
3
AGENCY LISTING INFORMATION
E6070
US
INSTALLATION
NOTE: DO NOT discard
the carton or other packing
materials until you have
inspected the appliance for
hidden damage and tested it
for proper operation.
Refer to SHIPPING DAMAGE
CLAIM PROCEDURE on the
inside front cover of this
manual.
WARNING:
RISK OF
PERSONAL INJURY
Installation procedures must
be performed by a qualified
technician with full knowledge
of all applicable electrical
codes. Failure can result in
personal injury and property
damage.
SCREW INTO
CABINET
MOUNTING
HOLES
TURN TO
ADJUST
HEIGHT
UNPACKING & INSPECTION
Carefully remove the appliance from the carton. Remove all
protective plastic film, packing materials and accessories from the
appliance before connecting electrical power or otherwise performing
any installation procedure.
Carefully read all instructions in this manual and the Installation
Instruction Sheet packed with the appliance before starting any
installation.
Read and understand all labels and diagrams attached to the
appliance.
Carefully account for all components and accessories before
discarding packing materials. Store all accessories in a convenient
place for later use.
COMPONENTS
1 set ADJUSTABLE 6” LEGS
1 or 2 set. REMOVABLE DRAWER GLIDES
1 or 2 ea. REMOVABLE DRAWER FRAME(S)
1 or 2 ea. PRODUCT PAN(S)
1 or 2 ea. BAFFLE ASSEMBLY(S)
SETUP
Setup the appliance only on a firm, level, non-combustible surface.
Verify local codes for requirements. Concrete, tile, terrazzo or metal
surfaces are recommended. Metal over combustible material may not
meet code for non-combustible surfaces.
Install provided 6” legs or optional legs or casters. Verify that the unit
sits firmly ON ALL FOUR LEGS. With a spirit level, check that the
appliance is level front-to-back and side-to-side. With the adjustable
legs, adjust as required to level the appliance. All four legs must be
adjusted to firmly contact the floor in order to prevent tipping.
Refer to the Installation Instruction Sheet for required clearances.
Maintain required clearances between the appliance and adjacent
combustible surfaces.
Verify baffle(s) properly installed.
Install removable drawer glides, drawer frame(s) and product pan(s) as
required.
Avoid storing flammable or combustible materials in, on or near the
appliance.
046 p/n 307033 OpM Tortilla Chip Warmer
4
INSTALLATION (continued)
ELECTRICAL
Refer to electrical specifications on page 1. Circuit must meet or
exceed the amperage and wattage requirements listed.
120 Volt units require a properly grounded NEMA 5-15R receptacle:
046 p/n 307033 OpM Tortilla Chip Warmer
WARNING:
ELECTRIC
All servicing requiring
access to non-insulated electrical components must be
performed by a factory authorized technician.
DO NOT open any access
panel which requires the use
of tools. Failure to
follow this warning can
result in severe electrical
shock.
SHOCK HAZARD
CAUTION:
RISK OF
DO NOT connect or energize
this appliance until all
installation instructions are
read and followed. Damage
to the appliance will result if
these instructions are not
followed.
DAMAGE
CAUTION:
ELECTRICAL
SHOCK HAZARD
The ground prong of the
power cord is part of a
system designed to protect
you from electric shock in the
event of internal damage.
DO NOT cut off the large
round ground prong, or twist
a blade to fit an existing
receptacle.
IMPORTANT:
Contact a licensed electrician
to install and connect
electrical power to the
appliance.
IMPORTANT:
Damage due to being
connected to the wrong
voltage or phase is NOT
covered by warranty.
5
OPERATION
CAUTION:
HOT SURFACE
Exposed surfaces can be hot
to the touch and may cause
burns.
CAUTION:
ELECTRICAL
SHOCK HAZARD
DO NOT splash or pour water
onto control panel or wiring.
THERMOMETER
DANGER
ZONE
INCREASE
HEATING
INDICATOR
LIGHT
GRAPHIC
SCALE
TEMPERATURE
CONTROL
KNOB
DECREASE
LIGHTED
POWER
SWITCH
OPERATION
TCW- and TCWN- warmers are designed for holding dry, crispy
product at temperature. Do not use this unit for wet or moist operation.
Humidity control vent should be OPEN.
Each drawer is individually controllable for temperature.
Before operating:
1. Be sure fan baffle is properly installed.
2. Be sure removeable drawer glides, and removeable drawer(s) are
properly installed.
Press power switch to ON. Lighted portion of switch will glow.
Turn each temperature control to 180º. Heating indicator light will glow
while heating element is energized.
Allow unit to pre-heat for 30 minutes prior to use.
When the heating indicator light first goes out, set temperature control
to desired temperature. Recommended temperature is 140º to 165º.
NOTE: Graphic scale provides an approximation of the temperature
setting. Always verify temperature by reading the thermometer.
Install a clean, dry product pan in each drawer. Load the product into
the product pan(s).
Preserve food quality and safety. Do not operate this unit in the
DANGER ZONE (less than 140º), as indicated on the thermometer.
At close-of-day:
1. Remove all product from unit. Safely store or discard any
remaining product.
2. Turn power switch for each drawer section to OFF.
3. Perform scheduled cleaning.
046 p/n 307033 OpM Tortilla Chip Warmer
Temperature Control
IMPORTANT:
DO NOT put ice into a
product pan. Ice in the pan
will cause condensation on
the inside of the warmer
cavity. Damage caused by
this type of condensation is
NOT covered by warranty.
6
CLEANING
PRECAUTIONS: Press power switch to OFF.
Allow drawer(s) to cool before proceeding.
Remove drawer pan(s)
FREQUENCY: Minimum - Weekly
TOOLS: Warm water and mild detergent
Clean cloth or sponge
1. Press power switch to OFF. Allow drawers to cool. Remove
product pan(s) and safely store or discard any remaining product.
2. Remove drawers an d glides from warmer:
a. Pull drawer out until fully extended.
b. Raise front of drawer until front rollers clear glides. Continue
pulling drawer out until rear rollers clear glides.
c. Push glides all the way back in. Tilt bottom of glide toward
center of cavity, then lift off of fixed rollers.
3. Clean drawers and glides by wiping with a clean cloth dampened
with warm water and mild detergent. Product pans may be
cleaned as above, or in a dishwasher. Rinse all components
thoroughly by wiping with a clean cloth dampened with clean
water. Dry with a clean cloth.
4. Remove fan baffle by lifting up and out.. Clean fan baffle by wiping
with a clean cloth dampened with warm water and mild detergent.
Rinse by wiping with a clean cloth dampened with clean water.
Dry by wiping with a clean cloth.
5. Sweep crumbs and oth er d ebris from warmer cavity. Carefully
clean fan by wiping blades with a clean cloth or sponge dampened
with warm water and mild detergent.
6. Clean interior of cavity by wiping with a clean cloth or sponge
dampened with warm water and mild detergent. Rinse by wiping
with a clean cloth dampened with clean water. Dry with a clean
cloth. Be careful to avoid damaging thermometer or thermostat
bulbs or capillary tubes, which are exposed inside cavity.
7. Clean outside of the unit by wiping with a clean cloth or sponge
dampened with warm water and mild detergent. Dry with a clean
cloth, then wipe with a polish formulated for stainless steel.
046 p/n 307033 OpM Tortilla Chip Warmer
8. Reinstall fan baffle(s), drawer glides, drawer(s) and product pan(s).
PROCEDURE IS COMPLETE
CAUTION:
HOT SURFACE
Exposed surfaces can be hot
to the touch and may cause
burns.
CAUTION:
ELECTRICAL
SHOCK HAZARD
DO NOT splash or pour water
onto control panel or wiring.
DO NOT submerge drawer
frames in water. Water
damage is not covered by
warranty.
IMPORTANT: DO NOT use
steel wool or abrasive
cleansers to clean the
warmer, drawers or drawer
rollers.
IMPORTANT:
Be careful to avoid damaging
thermometer or thermostat
bulbs, which are exposed
inside cavity.
7
CLEANING INSTRUCTIONS
SYMPTOM POSSIBLE CAUSE SUGGESTED REMEDY
Warmer unplugged
Plug warmer into appropriate
receptacle
Circuit breaker off or tripped Reset circuit breaker
No lights or heat
(all drawers)
Internal overload tripped
Internal damage
Allow unit to cool until overload
automatically resets
Contact an Authorized Wells
Service Agency for repairs
Temperature control not set Set for desire d temperature.
No heat (one drawer)
Internal damage
Contact an Authorized Wells
Service Agency for repairs.
Food gets soggy Humidity control vent not OPEN OPEN air vent for dry operation
Drawer hard to open/close or
falls out when opened
Drawer glides not properly
installed
Internal damage
Properly reinstall glides and
drawers.
Contact an Authorized Wells
Service Agency for repairs.
NOTE: There are no user
serviceable components in
this appliance. In all cases of
damage or component
malfunction, contact your
Authorized Wells Service
Agency for repairs.
046 p/n 307033 OpM Tortilla Chip Warmer
8
PARTS & SERVICE
ACCESSORY PART NO.
LEGS, 4” (SET OF 4) 20314
LEGS, 6” SS W/PLASTIC FEET (SET OF 4) 21607
KIT, CASTERS (SET OF 4) 21947
IMPORTANT: Use only
factory authorized service
parts and replacement
filters.
For factory authorized
service, or to order factory
authorized replacement parts,
contact your Wells authorized
service agency, or call:
Wells Bloomfield, LLC
2 Erik Circle
P. O. Box 280
Verdi, NV 89439
Service Parts Dept.
phone: (775) 689-5707
fax: (775) 689-5976
Service Parts Department can
supply you with the name and
telephone number of the
WELLS AUTHORIZED
SERVICE AGENCY
nearest you.
CUSTOMER SERVICE DATA
RESTAURANT _____________________________ LOCATION _____________
INSTALLATION DATE ________________________ TECHNICIAN ___________
SERVICE COMPANY ________________________________________________
046 p/n 307033 OpM Tortilla Chip Warmer
ADDRESS ___________________________ STATE ______ ZIP__________
TELEPHONE NUMBER (_____)_____-_________
EQUIPMENT MODEL NO. _______________
EQUIPMENT SERIAL NO. _______________
VOLTAGE: (check one) 120
please have this information available if calling for service
9
Genuine Parts
Protect - YOU - All - Ways
SERVICE TRAINING - QUALITY SERVICE
CUSTOMER SATISFACTION
Commercial Food Equipment Service Association
Wells Bloomfield proudly supports CFESA
Commercial Food Equipment Service Association
SERVICE TRAINING - QUALITY SERVICE
CUSTOMER SATISFACTION
WELLS BLOOMFIELD, LLC
2 ERIK CIRCLE, P. O. Box 280 Verdi, NV 89439
telephone: 775-689-5703
fax: 775-689-5976
www.wellsbloomfield.com
PRINTED IN UNITED STATES OF AMERICA
Loading...