Wells SS10TDUCIA12 User Manual
Over 90 Years Of Quality Foodservice
Products And Service
Model SS10TDUIAF
DESCRIPTION
Wells new Auto Fill, heavy-duty, top-mounted, drop-in round food
warmers are designed to hold heated foods at safe and fresh
serving temperatures and accommodate either 7 or 11 quart
standard round inset pans. The Auto Fill feature ensures that the
water is always at the correct level for temperature consistency
while preventing dry operation.
SPECIFICATIONS
Construction – One-piece stainless steel top fl ange and heavygauge, deep-drawn stainless steel warming pans are standard
features on all models. Wellsloks are standard for quick and easy
installation.
NEW
Auto Fill
Models
Job Item No.
SS8 and SS10 Series
7 & 11 Quart
Fully Insulated with Auto Fill
Round Drop-In Food Warmers
STANDARD FEATURES
❏ Accommodates standard 7 or 11 quart insets
❏ Eight Auto-Fill models to choose from
❏ One-piece stainless steel top fl ange and heavy-gauge, deep-
drawn stainless steel warming pans.
❏ Wet operation only
❏ Energy Saving fully insulated
❏ Fully Insulated models are perfect for non-metal counters
(with adapter kit)
❏ Thermostatic controls standard
❏ Wellslock standard for ease of installation
❏ Powerful tubular heating elements
❏ ½” drains are standard
❏ Cords & Plugs available
❏ 2-Year Limited Parts & 1-Year Limited Labor Warranty
OPTIONS & ACCESSORIES
❏ Inset with lid
❏ 8 oz. soup ladle
❏ Drain valve extension kit
❏ Adaptor top for 4-quart inset
❏ Adaptor top for 7-quart inset
❏ Non-metal counter adapter kit
❏ Optional 72” control wiring
CERTIFICATIONS
Insulation - Auto fi ll models are fully insulated around the sides
and bottom for energy savings, quicker pre-heat, faster recovery
and less heat under the counter.
Controls & Heating- Auto Fill models feature thermostatic
controls for precise temperature control and temperature-ready
indicator lights. Auto Fill models may be manifolded together
with up to three additional Standard or Insulated Round warmers
models with drains to reduce expense while providing the auto-fi ll
feature to all the warmers in the same counter (manifold provided
by customers and according to local & national plumbing codes)
ADDITIONAL FEATURES AVAILABLE
• 120V or 208/240V
• Drains standard
• Cord & Plug – optional
• Fully insulated – standard models
• Thermostatic Controls – standard models
Wells Bloomfi eld · 10 Sunnen Dr. St. Louis, MO 63143 U.S.A.
Phone : (314) 678-6314 · Fax (314) 781-5445
www.wellsbloomfi eld.com · Printed in the U.S.A.
V
Sheet No. SS10AF-01/14
NOTE: Specifi cations are subject to change without
notice and are not intended for installation purposes.
See installation instructions prior to installing the unit.
Q
Over 90 Years Of Quality Foodservice
Products And Service
SS8 and SS10 Series
7 & 11 Quart
Fully Insulated with Auto Fill
Round Drop-In Food Warmers
Minimum Clearances
Fully Insulated Models 1
* When control box is located below the warmer, front clearance may be reduces to 2 “ or 52mm
BACK
INCHES
(MM)
(25)
SIDE
INCHES
(MM)
1
(25)
BOTTOM
INCHES
(MM)
8
(203)
FRONT
INCHES
(MM)
4
(102)
OTE: Specifications are subject
to change without notice. Please refer to
N
installation instructions for cut-out dimensions and
fabrication details.
SPECIFICATIONS
NEW
Model
Number
SS8TDUIAF120
SS8TDUIAF
SS8TDUCIAF12
SS8TDUCIAF
SS10TDUIAF12
SS10TDUIAF
SS10TDUCIA12
SS10TDUCIAF
Description/
Controls
Thermostatic Fully Insulated 9.3 lbs.
Thermostatic Fully Insulated 9.3 lbs.
Thermostatic Fully Insulated 9.3 lbs.
Thermostatic Fully Insulated 9.3 lbs.
Thermostatic Fully Insulated 11.4 lbs.
Thermostatic Fully Insulated 11.4 lbs.
Thermostatic Fully Insulated 11.4 lbs.
Thermostatic Fully Insulated 11.4 lbs.
Insulation Installed
Weight
(4.2) kg
(4.2) kg
(4.2) kg
(4.2) kg
(5.2) kg
(5.2) kg
(5.2) kg
(5.2) kg
Shipping
Weight
10.3 lbs.
(4.7) kg
10.3 lbs.
(4.7) kg
10.3 lbs.
(4.7) kg
10.3 lbs.
(4.7) kg
12.4 lbs.
(5.6) kg
12.4 lbs.
(5.6) kg
12.4 lbs.
(5.6) kg
12.4 lbs.
(5.6) kg
Voltage Watts Phase Cord &
120V 825 1Ø No N/A Yes
208V/240 620/825 1Ø No N/A Yes
120V 825 1Ø Yes NEMA 5-15P No
208V/240 620/825 1Ø Yes NEMA 6-15P No
120V 825 1Ø No N/A Yes
208V/240 620/825 1Ø No N/A Yes
120V 825 1Ø Yes NEMA 5-15P Yes
208V/240 620/825 1Ø Yes NEMA 6-15P Yes
Plug
Plug Drain Approvals
U N V
U N V
U N V
U N V
U V N
U V N
U V N
U V N
AutoFill models require a water supply connection. Please refer to the operator’s manual and installation instructions for details.
Due to periodic changes in designs, methods, procedures, policies and regulations, the specifi cations contained in this sheet are subject to change without notice. While Wells
exercises good faith efforts to provide information that is accurate, we are not responsible for errors or omissions in information provided or conclusions reached as a result of using the
Wells Bloomfi eld · 10 Sunnen Dr. St. Louis, MO 63143 U.S.A.
Phone : (314) 678-6314 · Fax (314) 781-5445
www.wellsbloomfi eld.com · Printed in the U.S.A.
specifi cations. By using the information provided, the user assumes all risks in connection with such use.
NOTE: Specifi cations are subject to change without
notice and are not intended for installation purposes.
See installation instructions prior to installing the unit.
Loading...