Wells HRCP-7143 User Manual

Job Item No.
Over 90 Years Of Quality Foodservice Products And Service
Model HRCP-7343
DESCRIPTION
Wells Dual Temperature Hot & Refrigerated Drop-In Cold Pans are two units in one; from a heated Bain Marie to a refrigerated cold pan with the fl ip of a switch. All models are completely self-contained in one to six-well models and are CFC free. Each well holds 4 each 3rd size pans or equivalent fractional pans. Pans are recessed 3” to comply with NSF-7 performance requirements.
SPECIFICATIONS
Exterior –One-piece top fl ange and coved-corner interiors constructed of 18 gauge stainless steel. Exterior body constructed of heavy gauge, corrosion resistant steel. Condensing unit mounted on corrosion resistant frame below the cold pan.
Interior –CFC free foamed-in-place insulation through-out, 1” drain located in the center for easy cleaning. Ledge is recessed 3” to comply with NSF-7 requirements, allowing a layer of air to insulate food and for pan support.
Refrigeration – Type 134A and Type 404 A CFC free refrigerant system featuring Air cooled, wrapped coil construction on both sides and bottom. Refrigeration system features sight glass, easy service valves, dryer/fi lter and receiver. Condensing unit may be easily removed for service. Larger compressors speed refrigeration.
Dual Temperature NSF-7
Hot & Refrigerated Cold Pans
Extra Capacity 4 3rd pan
HRCP-7143 HRCP-7243 HRCP-7343 HRCP-7443 HRCP-7543 HRCP-7643
Heating - Automatic water-fi ll with high-limit protection featuring a water sensor and solenoid value to maintain proper water levels. And effi cient electric immersion heating system transfers heat directly to the water while a positive-off thermostat controls provides adjustable and consistent temperatures. Designed for wet operation only.
STANDARD FEATURES
NSF compliant with 3” recessed top edge
Self contained drop-in design
Each well hold 4 each 3rd size pans or equivalent fractional
sized pans
Stainless steel top and liner for maximum strength and durability
1” drains for ease of cleaning
Single control for changing from hot to cold operation
Easy access temperature & function control panel attached to
a 24” long fl exible conduit for optional counter mounting
Type 134A and Type 404A CFC free refrigerant
Fully insulated, CFC free, foamed-in place insulation keeps
food cold while saving energy
Recessed ledge for pan support and colder, fresher products
Quick & easy service with sight glass, service valves, lter/
dryer and receiver
Adaptor bars provided for food pans
Limited 1 year parts & labor warranty
OPTIONS & ACCESSORIES
5-year compressor warranty Perforated bottom strainer plate conveniently holds ice
above drain to prevent clogging
Adaptor bars for fractional sized pans Remote on/off switch 220/230/240V 50 cycle 2nd year parts & labor warranty Remote models (Includes compressor and condensing units
and up to 20’ leads)
Remote models without compressors or condensing unitsSpecial condenser orientation and/or compressor rack location
CERTIFICATIONS
Sheet No. WELLHRCP43-09/12
Wells Bloom eld · 10 Sunnen Dr. St. Louis, MO 63143 U.S.A. Phone : (314) 678-6314 · Fax (314) 781-3636 www.wellsbloomfi eld.com © 2012 Wells Bloomfi eld · Printed in the U.S.A.
NOTE: Specifi cations are subject to change without
notice and are not intended for installation purposes.
See installation instructions prior to installing the unit.
INCHES
MM
Over 90 Years Of Quality Foodservice Products And Service
Dual Temperature NSF-7
Hot & Refrigerated Cold Pans
Extra Capacity 4 3rd pan
HRCP-7143 HRCP-7243 HRCP-7343
HRCP-7443 ❏ HRCP-7543 ❏ HRCP-7643
OTE:
N
Specifications are subject to change without notice and are not intended for installation purposes. See installation instructions prior to installing the unit.
SPECIFICATIONS
OVERALL DIMENSIONS INTERIOR DIMENSIONS CUT OUT DIMENSIONS
Model Number
HRCP-7143
HRCP-7243
HRCP-7343
HRCP-7443
HRCP-7543
HRCP-7643
Front to Back
Model Number
HRCP-7143 208/240 1.9/2.5 9.0/10.4 SINGLE *
HRCP-7243 208/240 1.9/2.5 9.0/10.4 SINGLE *
HRCP-7343 208/240 3.8/5.0 14.4/16.7 SINGLE *
HRCP-7443 208/240 3.8/5.0 18.1/20.8 SINGLE *
HRCP-7543 208/240 6.0/8.0 28.9/33.3 SINGLE *
HRCP-7643 208/240 6.0/8.0 28.9/33.3 SINGLE *
OVERALL DIMENSIONS
A
Inches
(MM)
34-1/4
(870)
34-1/4
(870)
34-1/4
(870)
34-1/4
(870)
34-1/4
(870)
34-1/4
(870)
B
Left to Right
Inches
(MM)
19-1/8
(486)
32-3/4
(832)
46-1/2 (1181)
60-1/4 (1530)
74
(1880)
87-3/4 (2229)
POWER SUPPLY- HOT OPERATION
VOLTS KW AMPS PHASE POWER
C Height Inches
(MM)
24-3/8
(619)
24-3/8
(619)
24-3/8
(619)
24-3/8
(619)
24-3/8
(619)
24-3/8
(619)
D
Front to Back
Inches
(MM)
29
(737)
29
(737)
29
(737)
29
(737)
29
(737)
29
(737)
* All model permanently field wired connected. Power supply single phase, 3-wire, 120/208-240V, L2-N 120VAC
E
Left to Right
Inches
Front to Back
(MM)
13-7/8
(353)
27-1/2
(699)
41-1/4 (1048)33(839)
55
(1397)33(839)
68-3/4 (1746)33(839)
82-1/2 (2096)33(839)
SUPPLY
F
Inches
(MM)
33
(839)
33
(839)
G
Left to Right
Inches
(MM)
17-7/8
(454)
31-1/2
(826)
45-1/4 (1149)
59
(1499)
72-3/4 (1848)
86-1/2 (2197)
WEIGHTS CARTON DIMENSIONS CRATE SIZE
Model Number
HRCP-7143 115
HRCP-7243
HRCP-7343
HRCP-7443
HRCP-7543
HRCP-7643
POWER SUPPLY- REFRIGERATION OPERATION
Model Number
HRCP-7143 115 1/4 3.9 SINGLE * 134A
HRCP-7243 115 1/4 3.9 SINGLE * 134A
HRCP-7343 115 1/3 6.2 SINGLE * 404A
HRCP-7443 115 1/2 7.0 SINGLE * 404A
HRCP-7543 115 3/4 15.8 SINGLE * 404A
HRCP-7643 115 3/4 15.8 SINGLE * 404A
SHIPPING INFORMATION
(KG)
105 (48)
124 (56)
156 (71)
175 (79)
194 (88)
213 (97)
WIDTH
Inches
(MM)
(533)29(737)32(813)
(737)34(864)32(813)
(737)48(1219)32(813)
(737)62(1575)32(813)
(737)76(1930)32(813)
(737)89(2261)32(813)
SHIPPING
WEIGHT
POUNDS
(KG)
(52)
140 (64)
175 (79)
210 (95)
245
(111)
285
(129)
INSTALLED
WEIGHT
POUNDS
VOLTS HP AMPS
Max Draw
DEPTH Inches
(MM)
21
29
29
29
29
29
PHASE POWER
SUPPLY
HEIGHT
Inches
(MM)
CUBIC
FEET
11.3 0.31
18.3 0.52
25.8 0.73
33.3 0.94
41.0 1.16
47.8 1.35
REFRIGERANT
All HRCP models feature automatic water fill systems and require a water supply connection. Please refer to the op-
erator’s manual and installation instructions for details.
Due to periodic changes in designs, methods, procedures, policies and regulations, the specifi cations contained in this sheet are subject to change without notice. While Wells
exercises good faith efforts to provide information that is accurate, we are not responsible for errors or omissions in information provided or conclusions reached as a result of using the
Wells Bloom eld · 10 Sunnen Dr. St. Louis, MO 63143 U.S.A. Phone : (314) 678-6314 · Fax (314) 781-3636 www.wellsbloomfi eld.com © 2012 Wells Bloomfi eld · Printed in the U.S.A.
specifi cations. By using the information provided, the user assumes all risks in connection with such use.
NOTE: Specifi cations are subject to change without
notice and are not intended for installation purposes.
See installation instructions prior to installing the unit.
CUBIC
METERS
Loading...