Wells HRCP-7100ST User Manual
Job Item No.
Over 90 Years Of Quality Foodservice
Products And Service
Model HRCP-7400ST
DESCRIPTION
Wells Dual Temperature Hot & Refrigerated Drop-In Cold
Pans are two units in one; from a heated Bain Marie to a
refrigerated cold pan with the ip of a switch. All models are
completely self-contained in one to six-pan models are CFC
free and are recessed 3” to comply with NSF-7 performance
requirements. The sloped top provide customers with
improved visibility to food products.
SPECIFICATIONS
Dual Temperature NSF-7
Hot & Refrigerated Cold Pans
With Slope Top
o HRCP-7100ST o HRCP-7200ST o HRCP-7300ST
o HRCP-7400ST o HRCP-7500ST o HRCP-7600ST
STANDARD FEATURES
o NSF Series 7 compliant with 3” recessed top edge
o Self contained drop-in design
o Pans are raised in the rear for improved visibility and access
to food products
o Hold standard 12” by 20” food pans and fractional sized pans
o Stainless steel top and liner for maximum strength and
durability
o 1” drains for ease of cleaning
o Single control for changing from hot to cold operation.
o Easy access temperature & function control panel attached to
a 24” long exible conduit for optional counter mounting
o Type 134A or 404A CFC free refrigerant
o Fully insulated, CFC free, foamed-in place insulation keeps
food cold while saving energy
o Recessed ledge for pan support and colder, fresher products
o Quick & easy service with sight glass, service valves, lter/
dryer and receiver
o Adaptor bars provided for food pans
o Limited 1 year parts & labor warranty
Exterior – One-piece top ange and coved-corner interiors
constructed of 18 gauge stainless steel. Exterior body
constructed of heavy gauge, corrosion resistant steel.
Condensing unit mounted on corrosion resistant frame below
the cold pan.
Interior – CFC free foamed-in-place insulation through-out,
1” drain located in the center for easy cleaning. Ledge is
recessed 3” to comply with NSF-7 requirements, allowing a
layer of air to insulate food and for pan support.
Refrigeration – Air cooled, type 134A or 404A CFC free
refrigerant systems featuring wrapped coil construction
on both sides and bottom. Refrigeration system features
sight glass, easy service valves, dryer/lter and receiver.
Condensing unit may be easily removed for service. Larger
compressors speed refrigeration.
Heating - Automatic water-ll with high-limit protection
featuring a water sensor and solenoid value to maintain
proper water levels. And efcient electric immersion heating
system transfers heat directly to the water while a positiveoff thermostat controls provides adjustable and consistent
temperatures. Designed for wet operation only.
Wells Bloomeld · 10 Sunnen Dr. St. Louis, MO 63143 U.S.A.
Phone : (314) 678-6314 · Fax (314) 781-3636
www.wellsbloomeld.com · Printed in the U.S.A.
OPTIONS & ACCESSORIES
o 5-year compressor warranty
o Perforated bottom strainer plate conveniently holds ice
above drain to prevent clogging
o Adaptor bars for fractional sized pans
o Remote on/off switch
o Condenser orientation and/or compressor rack location
o 220/230/240V
o 50 cycle
o 2nd year parts & labor warranty
CERTIFICATIONS
Sheet No. WELLHRCP1-06/14
NOTE: Specications are subject to change without
notice and are not intended for installation purposes.
See installation instructions prior to installing the unit.
Over 90 Years Of Quality Foodservice
Products And Service
Dual Temperature NSF-7
Hot & Refrigerated Cold Pans
With Slope Top
o HRCP-7100ST o HRCP-7200ST o HRCP-7300ST
o HRCP-7400ST o HRCP-7500ST o HRCP-7600ST
INCHES
MM
SPECIFICATIONS
OVERALL DIMENSIONS INTERIOR DIMENSIONS CUT OUT DIMENSIONS
Model
Number
HRCP-7100ST
HRCP-7200ST
HRCP-7300ST
HRCP-7400ST
HRCP-7500ST
HRCP-7600ST
Front to Back
OVERALL DIMENSIONS
A
Inches
(MM)
27-1/8
(689)
27-1/8
(689)
27-1/8
(689)
27-1/8
(689)
27-1/8
(689))
27-1/8
(689)
Left to Right
Inches
(MM)
19-1/8
(486)
32-3/4
(832)
46-1/2
(1181)
60-1/4
(1530)
74
(1880)
87-3/4
(2229)
B
C
Height
Inches
(MM)
26-3/4
(679)
26-3/4
(679)
26-3/4
(679)
26-3/4
(679)
26-3/4
(679)
26-3/4
(679)
D
Front to Back
Inches
(MM)
21-7/8
(555)
21-7/8
(555)
21-7/8
(555)
21-7/8
(555)
21-7/8
(555)
21-7/8
(555)
E
Left to Right
Inches
(MM)
13-7/8
(352)
27-1/2
(699)
41-1/4
(1048)
55
(1397)
68-3/4
(1747)
82-1/2
(2096)
F
Front to Back
Inches
(MM)
25-7/8
(657)
25-7/8
(657)
25-7/8
(657)
25-7/8
(657)
25-7/8
(657)
25-7/8
(657)
G
Left to Right
Inches
(MM)
17-7/8
(451)
31-1/2
(800)
45-1/4
(1149)
59
(1499)
72-3/4
(1847)
86-1/2
(2197)
OTE:
N
Specifications
are subject to change
without notice and
are not intended for
installation purposes.
See installation
instructions prior to
installing the unit.
SHIPPING INFORMATION
WEIGHTS CARTON DIMENSIONS CRATE SIZE
Model
Number
HRCP-7100ST
HRCP-7200ST
HRCP-7300ST
HRCP-7400ST
HRCP-7500ST
HRCP-7600ST
SHIPPING
WEIGHT
POUNDS
(KG)
175
(80)
220
(100)
240
(109)
275
(125)
298
(136)
320
(146)
INSTALLED
WEIGHT
POUNDS
(KG)
150
(69)
190
(87)
210
(96)
240
(109)
255
(116)
275
(125)
WIDTH
DEPTH
Inches
(MM)
HEIGHT
Inches
Inches
(MM)
21
(533)29(737)32(813)
29
(737)34(864)32(813)
29
(737)48(1219)32(813)
29
(737)62(1575)32(813)
29
(737)76(1930)32(813)
29
(737)89(2261)32(813)
(MM)
CUBIC
FEET
11.3 0.31
18.3 0.52
25.8 0.73
33.3 0.94
41.0 1.16
47.8 1.35
CUBIC
METERS
POWER SUPPLY- HOT OPERATION
Model
Number
HRCP-7100 208/240 1.9/2.5 9.0/10.4 SINGLE *
HRCP-7200 208/240 1.9/2.5 9.0/10.4 SINGLE *
HRCP-7300 208/240 3.8/5.0 14.4/16.7 SINGLE *
HRCP-7400 208/240 3.8/5.0 18.1/20.8 SINGLE *
HRCP-7500 208/240 6.0/8.0 28.9/33.3 SINGLE *
HRCP-7600 208/240 6.0/8.0 28.9/33.3 SINGLE *
VO LTS KW AMPS PHASE POWER
SUPPLY
* All model permanently field wired connected. Power supply single phase, 3-wire, 120/208-240V, L2-N 120VAC
POWER SUPPLY- REFRIGERATION OPERATION
Model
Number
HRCP-7100ST
HRCP-7200ST
HRCP-7300ST
HRCP-7400ST
HRCP-7500ST
HRCP-7600ST
VO LTS HP AMPS PHASE POWER
115 1/4 4.9 SINGLE * 134A
115 1/4 4.9 SINGLE * 134A
115 1/3 5.6 SINGLE * 404A
115 1/2 6.4 SINGLE * 404A
115 3/4 15.2 SINGLE * 404A
115 3/4 15.2 SINGLE * 404A
SUPPLY
REFRIGERANT
All HRCP models feature automatic water fill systems and require a water supply connection. Please refer
to the operator’s manual and installation instructions for details.
Due to periodic changes in designs, methods, procedures, policies and regulations, the speci cations contained in this sheet are subject to change without notice. While Wells
exercises good faith efforts to provide information that is accurate, we are not responsible for errors or omissions in information provided or conclusions reached as a result of using the
Wells Bloom eld · 10 Sunnen Dr. St. Louis, MO 63143 U.S.A.
Phone : (314) 678-6314 · Fax (314) 781-3636
www.wellsbloom eld.com · Printed in the U.S.A.
speci cations. By using the information provided, the user assumes all risks in connection with such use.
NOTE: Speci cations are subject to change without
notice and are not intended for installation purposes.
See installation instructions prior to installing the unit.
Loading...