Wells HRCP-7100 User Manual

Over 90 Years Of Quality Foodservice Products And Service
Model RCP-7200
DESCRIPTION
Wells Refrigerated Drop-In Cold Pans hold pre-chilled food products at cold, fresh and safe serving temperatures. All models are completely self-contained in one to six-pan models with individual thermostatic controls, are CFC free and include an 8 ft. 120V cord and plug. Pans are recessed 3” to comply with NSF-7 performance requirements.
SPECIFICATIONS
Exterior – One-piece top fl ange and coved-corner interiors constructed of 18 gauge stainless steel. Exterior body constructed of heavy gauge, corrosion resistant steel. Condensing unit mounted on corrosion resistant frame below the cold pan.
Interior – CFC free foamed-in-place insulation through-out, 1” drain located in the center for easy cleaning. Ledge is recessed 3” to comply with NSF-7 requirements, allowing a layer of air to insulate food and for pan support.
Job Item No.
NSF-7 Refrigerated Cold Pans
RCP-7100 RCP-7200 RCP-7300
❏ RCP-7400 ❏ RCP-7500 ❏ RCP-7600
STANDARD FEATURES
3” recessed top edge to comply with NFS-7 requirements
Self contained drop-in design
Hold standard 12” by 20” food pans and fractional sized
pans
Stainless steel top and liner for maximum strength and durability
1” drains for ease of cleaning
On-off switch with 8 ft cord & plug for ease of installation and
operation
Type 134A or 404A CFC free refrigerant
Fully insulated, CFC free, foamed-in place insulation keeps
food cold while saving energy
Recessed ledge for pan support and colder, fresher products
Quick & easy service with sight glass, service valves, lter/
dryer and receiver
Limited 1 year parts & labor warranty
OPTIONS & ACCESSORIES
5-year compressor warrantyPerforated bottom strainer plate conveniently holds ice
above drain to prevent clogging
Adaptor bars for fractional sized pansRemote on/off switch220/230/240V50 cycle Remote models (Includes compressor and condensing units
and up to 20’ leads)
Remote models without compressors or condensing units
Special condenser orientation and compressor rack position
2nd year parts & labor warranty
CERTIFICATIONS
Refrigeration – Air cooled, type 134A or 404A CFC free refrigerant system featuring wrapped coil construction on both sides and bottom, individual thermostats, on/off switch, 8 ft. cord and plug set NEMA 5-15P (120V models). Refrigeration system features sight glass, easy service valves, dryer/fi lter and receiver. Condensing unit may be easily removed for service.
Wells Bloom eld · 10 Sunnen Dr. St. Louis, MO 63143 U.S.A. Phone : (314) 678-6314 · Fax (314) 781-3636 www.wellsbloomfi eld.com © 2012 Wells Bloomfi eld · Printed in the U.S.A.
Sheet No. WELLRCP7-02/12
NOTE: Specifi cations are subject to change without
notice and are not intended for installation purposes.
See installation instructions prior to installing the unit.
NSF-7 Refrigerated Cold Pans
INCHES
MM
Over 90 Years Of Quality Foodservice Products And Service
RCP-7100 RCP-7200 RCP-7300
RCP-7400 RCP-7500 RCP-7600
OTE: Specifications are
N
subject to change without notice and are not intended for installation purposes. See installation instructions prior to installing the unit.
SPECIFICATIONS
OVERALL DIMENSIONS INTERIOR DIMENSIONS CUT OUT DIMENSIONS
Model Number
RCP-7100 27-1/8
RCP-7200 27-1/8
RCP-7300 27-1/8
RCP-7400 27-1/8
RCP-7500 27-1/8
RCP-7600 27-1/8
Front to Back
OVERALL DIMENSIONS
A
Inches
(MM)
(689)
(689)
(689)
(689)
(689))
(689)
Left to Right
Inches
(MM)
19-1/8
(486)
32-3/4
(832)
46-1/2 (1181)
60-1/4 (1530)
74
(1880)
87-3/4 (2229)
B
C Height Inches
(MM)
26-1/8
(664)
26-1/8
(664)
26-1/8
(664)
26-1/8
(664)
26-1/8
(664)
26-1/8
(664)
D
Front to Back
Inches
(MM)
21-7/8
(556)
21-7/8
(556)
21-7/8
(556)
21-7/8
(556)
21-7/8
(556)
21-7/8
(556)
E
Left to Right
Inches
(MM)
13-7/8
(352)
27-1/2
(699)
41-1/4 (1048)
55
(1397)
68-3/4 (1746)
82-1/2 (2096)
F
Front to Back
Inches
(MM)
25-7/8
(657)
25-7/8
(657)
25-7/8
(657)
25-7/8
(657)
25-7/8
(657)
25-7/8
(657)
G
Left to Right
Inches
(MM)
17-7/8
(454)
31-1/2
(800)
45-1/4 (1149)
59
(1498)
72-3/4 (1847)
86-1/2 (2197)
WEIGHTS CARTON DIMENSIONS CRATE SIZE
Model Number
RCP-7100 115
RCP-7200 140
RCP-7300 175
RCP-7400 210
RCP-7500 245
RCP-7600 285
SHIPPING INFORMATION
105 (48)
124 (56)
156 (71)
175 (79)
194 (88)
213 (97)
WIDTH
Inches
(MM)
21
(533)29(737)32(813)
29
(737)34(864)32(813)
29
(737)48(1219)32(813)
29
(737)62(1575)32(813)
29
(737)76(1930)32(813)
29
(737)89(2261)32(813)
SHIPPING
WEIGHT
POUNDS
(KG)
(52)
(64)
(79)
(95)
(111)
(129)
INSTALLED
WEIGHT POUNDS
(KG)
DEPTH Inches
(MM)
HEIGHT
Inches
(MM)
CUBIC
FEET
METERS
11.3 0.31
18.3 0.52
25.8 0.73
33.3 0.94
41.0 1.16
47.8 1.35
POWER
SUPPLY
Model Number
RCP-7100 115 1/4 4.9 SINGLE NEMA 5-15P 134A
RCP-7200 115 1/4 4.9 SINGLE NEMA 5-15P 134A
RCP-7300 115 1/3 5.5 SINGLE NEMA 5-15P 404A
RCP-7400 115 1/2 6.4 SINGLE NEMA 5-15P 404A
RCP-7500 115 3/4 15.2 SINGLE NEMA 5-20P 404A
RCP-7600 115 3/4 15.2 SINGLE NEMA 5-20P 404A
Due to periodic changes in designs, methods, procedures, policies and regulations, the specifi cations contained in this sheet are subject to change without notice. While Wells
exercises good faith efforts to provide information that is accurate, we are not responsible for errors or omissions in information provided or conclusions reached as a result of using the
specifi cations. By using the information provided, the user assumes all risks in connection with such use.
Wells Bloom eld · 10 Sunnen Dr. St. Louis, MO 63143 U.S.A. Phone : (314) 678-6314 · Fax (314) 781-3636 www.wellsbloomfi eld.com © 2012 Wells Bloomfi eld · Printed in the U.S.A.
VOLTS HP AMPS PHASE POWER
SUPPLY
Refrigerant
NOTE: Specifi cations are subject to change without
notice and are not intended for installation purposes.
See installation instructions prior to installing the unit.
CUBIC
Loading...