Wells HMP6-120 User Manual
Job Item No.
Over 90 Years Of Quality Foodservice
Products And Service
Model HSW6D
HMP6DU
DESCRIPTION
Wells HMP6 Series and HSW Series Built-In Rectangular
Food Warmers are designed for top mount installation and
to hold heated foods at safe and fresh serving temperatures.
Wells HMP6 Series accommodates one 6” X 20” half-size food
pan or equivalent fractional inset pans while the HSW6 Series
accommodates one 10” X 12” half-size food pan or equivalent
fractional pans. Both are designed for wet or dry operation.
HMP6 Series & HSW6 Series
6” x 20” or 12” x 10” Half- Size Fractional,
Single Well, Heavy Duty, Top Mount
Rectangular Drop-In Food Warmers
Additional Features Available
• Drains
• Fully Insulated HSW6 Models
STANDARD FEATURES
o HMP6 models accommodate one 6” X 20” Half-size food pan
or equivalent fractional inset pans
o HSW6 Models accommodate one 12” X 10” Hail-size food
pan or equivalent fractional inset pans
o One-piece stainless steel top ange and heavy-gauge, deepdrawn stainless steel warming pans
o Suitable for wet or dry operation (wet recommended for best
results)
o Thermostatic controls
o Separate controls for each individual wells
o High limits prevent overheating
o Thermostatic controls are recessed in a one-piece, drawn,
front-mounted panel
o Powerful tubular heating elements
o ½” drains available
o 2-Year Limited Parts & 1-Year Limited Labor Warranty
OPTIONS & ACCESSORIES
o Optional 72”wiring
o Drain screens
o Drain value extension kit, extension from drain to counter
front with remote handle, for use with “D” models only, 20385
CERTIFICATIONS
R
F
SPECIFICATIONS
Construction – One-piece stainless steel top ange and heavygauge, deep-drawn stainless steel warming pans are standard
features on all models.
Insulation – HSW6 Series models are fully insulated around
all 4-sides and bottom for quicker preheat, faster recovery and
energy savings.
Controls & Heating- Individual controls for each well provide
maximum versatility. Models with thermostatic or innite controls
are available. High-limits prevent overheating. Temperature-ready
indicator lights are standard on all control types. Powerful tubular
heating elements are located under the warming pans for quick
and efcient heating and for even heat distribution.
Wells Bloomeld · 10 Sunnen Dr. St. Louis, MO 63143 U.S.A.
Phone : (314) 678-6314 · Fax (314) 781-5445
www.wellsbloomeld.com · Printed in the U.S.A.
Sheet No. HMP6-04/14
NOTE: Specications are subject to change without
notice and are not intended for installation purposes.
See installation instructions prior to installing the unit.
Over 90 Years Of Quality Foodservice
Products And Service
HMP6 Series & HSW6 Series
6” x 20” or 12” x 10” Half- Size Fractional,
Single Well, Heavy Duty, Top Mount
Rectangular Drop-In Food Warmers
HMP6
OTE: Specifications are subject
N
to change without notice and are not
intended for installation purposes. See installation
instructions prior to installing the unit.
BACK
1
(25)
Minimum Clearance
SIDE
2
(51)
BOTTOM
9
(229)
HSW6_D
FRONT*
2-5/8
(67)
SPECIFICATIONS
(113)
(113)
6-1/4
(159)
6-1/4
(159)
6-1/4
(159)
6-1/4
(159)
6-1/4
(159)
Shipping
Weights
Pounds
(KG)
(6.4)
(6.4)
CONTROL
PANEL
Height
Inches
(MM)
(84)
(84)
4-7/16
4-7/16
NOTE: Speci cations are subject to change without
notice and are not intended for installation purposes.
See installation instructions prior to installing the unit.
(162)
(162)
(162)
(162)
(295)
(295)
(295)
OVERALL
Length
Front to Back
Inches
(MM)
20-3/4
(527)
20-3/4
(527)
20-3/4
(527)
20-3/4
(527)
13-7/8
(352)
13-7/8
(352)
13-7/8
(352)
Model
Number
HMP6-120 Infinite control no
HMP6D-120 Infinite control with
HMP6DU-120 Thermostatic control
HMP6T-230 Thermostatic control
HSW6-120 Thermostatic control
HSW6D-120 Thermostatic control
HSW6D Thermostatic control
Due to periodic changes in designs, methods, procedures, policies and regulations, the speci cations contained in this sheet are subject to change without notice. While Wells exercises good faith
efforts to provide information that is accurate, we are not responsible for errors or omissions in information provided or conclusions reached as a result of using the speci cations. By using the
Description Volts Watts Phase AMPS OVERALL
drain
drain
with drain
with drain
no drain
with drain
with drain
120V 750 1Ø 6.25 6-3/8
120V 750 1Ø 6.25 6-3/8
120V 750 1Ø 6.25 6-3/8
220-240V 575 1Ø 2.6/2.4 6-3/8
120V 825 1Ø 6.9 11-5/8
120V 450 1Ø 3.75 11-5/8
208/240V 620/825 1Ø 3/3.4 11-5/8
information provided, the user assumes all risks in connection with such use.
Width
Left to Right
Inches
(MM)
OVERALL
Height
Inches
(MM)
7-9/16
(192)
7-9/16
(192)
7-9/16
(192)
7-9/16
(192)
7-3/16
(183)
7-3/16
(183)
7-3/16
(183)
CONTROL
PANEL
Width
Inches
(MM)
3-5/16
3-5/16
5-7/8
(149)
5-7/8
(149)
5-7/8
(149)
5-7/8
(149)
5-7/8
(149)
Wells Bloom eld · 10 Sunnen Dr. St. Louis, MO 63143 U.S.A.
Phone : (314) 678-6314 · Fax (314) 781-5445
www.wellsbloom eld.com · Printed in the U.S.A.
Crate Size
Cubic Feet
(Cubic
Meters)
11
(5)
11
(5)
14
14
18
(8)
18
(8)
18
(8)
2.54
(0.072)
2.54
(0.072)
2.54
(0.072)
2.54
(0.072)
2.16
(0.062)
2.16
(0.062)
2.16
(0.062)
Approvals
R
R
U
F
U
U
U
Loading...