Wells HD8799, HD8802 User Manual

WELLS BLOOMFIELD, LLC

2 ERIK CIRCLE, P. O. Box 280 Verdi, NV 89439

telephone: [phone]

fax: [phone]

www.wellsbloomfield.com

OWNERS MANUAL

for

HEATED DISPENSER

MODEL:

HD8799 2½-Gallon

HD8802 5-Gallon

Includes:

Installation

Operation

Use & Care

Servicing Instructions

595

Model HD8799

Heated Dispenser

IMPORTANT: DO NOT DISCARD THIS MANUAL

This manual is considered to be part of the appliance and is to be given to the OWNER or
MANAGER of the restaurant, or to the person responsible for TRAINING OPERATORS of

this appliance. Additional manuals are available from your WELLS DEALER.

THIS MANUAL MUST BE READ AND UNDERSTOOD BY ALL PERSONS U S ING OR

INSTALLING THIS APPLIANCE. Contact your WELLS DEALER if you have any

questions concerning installation, operation or maintenance of this equipment.

PRINTED IN UNITED STATES OF AMERICA

p/n 75982 Rev. D ECN-13380 M595 071101 cps

LIMITED WARRANTY STATEMENT

Unless otherwise specified, all commercial cooking
equipment manufactured by WELLS BLOOMFIELD, LLC is
warranted against defects in materials and workmanship for
a period of one year from the date of original installation or
18 months from the date of shipment from our factory,
whichever comes first, and is for the benefit of the original
purchaser only.
THIS WARRANTY IS THE COMPLETE AND ONLY
WARRANTY, EXPRESSED OR IMPLIED IN LAW OR IN
FACT, INCLUDING BUT NOT LIMITED TO, WARRANTIES
OF MERCHANTABILITY OR FITNESS FOR ANY
PARTICULAR PURPOSE, AND/OR FOR DIRECT,
INDIRECT OR CONSEQUENTIAL DAMAGES IN
CONNECTION WITH WELLS BLOOMFIELD PRODUCTS.
This warranty is void if it is determined that, upon inspection
by an authorized service agency, the equipment has been
modified, misused, misapplied, improperly installed, or
damaged in transit or by fire, flood or act of God. It also
does not apply if the serial nameplate has been removed, or
if service is performed by unauthorized personnel. The
prices charged by Wells Bloomfield for its products are

based upon the limitations in this warranty. Seller’s
obligation under this warranty is limited to the repair of
defects without charge by a Wells Bloomfield factory
authorized service agency or one of its sub-service
agencies. This service will be provided on customer’s
premises for non-portable models. Portable models (a
device with a cord and plug) must be taken or shipped to
the closest authorized service agency, transportation
charges prepaid, for service. In addition to restrictions
contained in this warranty, specific limitations are shown in
the Service Policy and Procedure Guide. Wells Bloomfield
authorized service agencies are located in principal cities.
This warranty is valid in the United States and Canada and
void elsewhere. Please consult your classified telephone
directory, your foodservice equipment dealer or contact:

Service Department, Wells Bloomfield, LLC

P.O. Box 280, Verdi, Nevada 89439

phone [phone] or fax [phone]

for information and other details concerning warranty.

SERVICE POLICY AND PROCEDURE GUIDE and ADDITIONAL WARRANTY EXCLUSIONS

1. Resetting of safety thermostats, circuit breakers, over
load protectors, and/or fuse replacements are not
covered by this warranty unless warranted conditions
are the cause.

2. All problems due to operation at voltages or phase
other than specified on equipment nameplates are
not covered by this warranty.
Conversion to correct voltage and/or phase must be
the customer’s responsibility.

3. All problems due to electrical connections not made

in accordance with electrical code requirements
and wiring diagrams supplied with the equipment are

not covered by this warranty.

4. Replacement of items subject to normal wear, to
include such items as knobs, light bulbs; and, normal
maintenance functions including adjustments of
thermostats, adjustment of micro switches and
replacement of fuses and indicating lights are not
covered by warranty.

5. Damage to electrical cords and/or plug due to exposure
to excessive heat are not covered by this warranty.

6. Full use, care, and maintenance instructions supplied
with each machine. Noted maintenance and

preventative maintenance items, such as servicing and

cleaning schedules, are customer responsibility. Those
miscellaneous adjustments noted are customer
responsibility. Proper attention to preventative
maintenance and scheduled maintenance procedures
will prolong the life of the appliance.

7. Travel mileage is limited to sixty (60) miles from an
Authorized Service Agency or one of its sub-service
agencies.

8. All labor shall be performed during regular working
hours. Overtime premium will be charged to the buyer.

9. All genuine Wells replacement parts are warranted for
ninety (90) days from date of purchase on non­warranty equipment. This parts warranty is limited only
to replacement of the defective part(s). Any use of

non-genuine Wells parts completely voids any

warranty.

10. Installation, labor, and job check-outs are not

considered warranty and are thus not covered by this
warranty.

11. Charges incurred by delays, waiting time or operating

restrictions that hinder the service technician’s ability to
perform service are not covered by warranty. This
includes institutional and correctional facilities.

595 p/n 75982 OpM Heated Dispenser

SHIPPING DAMAGE CLAIM PROCEDURE

NOTE: For your protection, please note that equipment in

this shipment was carefully inspected and packaged by
skilled personnel before leaving the factory. Upon
acceptance of this shipment, the transportation company
assumes full responsibility for its safe delivery.
IF SHIPMENT ARRIVES DAMAGED:

1. VISIBLE LOSS OR DAMAGE: Be certain that any
visible loss or damage is noted on the freight bill or
express receipt, and that the note of loss or damage is
signed by the delivery person.

2. FILE CLAIM FOR DAMAGE IMMEDIATELY:

Regardless of the extent of the damage.

3. CONCEALED LOSS OR DAMAGE: if damage is
unnoticed until the merchandise is unpacked,
notify the transportation company or carrier immediately,
and file “CONCEALED DAMAGE” claim with them. This
should be done within fifteen (15) days from the
date the delivery was made to you. Be sure to retain
the container for inspection.

Wells Bloomfield cannot assume liability for damage or loss
incurred in transit. We will, however, at your request, supply
you with the necessary documents to support your claim.

xi

TABLE OF CONTENTS

WARRANTY xi
SPECIFICATIONS 1
FEATURES & OPERATING CONTROLS 2
PRECAUTIONS & GENERAL INFORMATION 3
AGENCY LISTING INFORMATION 3
INSTALLATION 4
OPERATION 5
CLEANING INSTRUCTIONS 6
TROUBLESHOOTING SUGGESTIONS 7
SERVICING INSTRUCTIONS
EXPLODED VIEW & PARTS LIST 8
FAUCET REPAIR 10
WIRING DIAGRAM 10
PARTS & SERVICE 11

Thank You for purchasing this
Wells Bloomfield appliance.

Proper installation, professional operation
and consistent maintenance of this appliance
will ensure that it gives you the very best
performance and a long, economical service
life.

This manual contains the information needed
to properly install this appliance, and to use
and care for the appliance in a manner that
will ensure its optimum performance.

SPECIFICATIONS

MODEL VOLTS

50/60 Hz

HD8799

120 200 1.7

HD8802

WATTS AMPS

1ø

POWER SUPPLY

CORD

6' NEMA 5-15P

HD8799 2½-Gallon Dispenser

HEIGHT OVERALL

WIDTH

20 - 11/16"

(510 mm)

HD8802 5-Gallon Dispenser

HEIGHT OVERALL

24-1/4"

(621mm)

This manual applies to the following Wells products:
HD8799 2½-Gallon Heated Dispenser

HD8802 5-Gallon Heated Dispenser

595 p/n 75982 OpM Heated Dispenser

12 - 7/8"

(328 mm)

WIDTH

14-1/4"

( 361mm)

OVERALL

DEPTH

14 - 1/4"

(361 mm)

OVERALL

DEPTH

( 381mm)

CAPACITY FIXED

2 - 1/2 gallon

(10 liter)

CAPACITY ADJUSTABLE TO

15"

5 gallon

(20 liter)

APPLICABILITY

TEMPERATURE

140ºF

(60ºC)

TEMPERATURE

170ºF

(77ºC)

1

FEATURES & OPERATING CONTROLS

Fig. 1 Features & Operating Controls

595 p/n 75982 OpM Heated Dispenser

2

PRECAUTIONS AND GENERAL INFORMATION

WARNING: Electric Shock Hazard

All servicing requiring access to non-insulated components must be performed by qualified
service personnel. Do not open any access panels which require the use of tools. Failure to
heed this warning can result in electrical shock.

WARNING Electric Shock Hazard

Warmer must be properly grounded to prevent possible shock hazard. Electrical shock will
cause death or serious Injury.

This appliance is intended for commercial use only.
This appliance is intended for use to warm syrup for human

consumption. No other use is recommended or authorized by
the manufacturer or its agents.

This appliance is intended for use in commercial establishments,
where all operators are familiar with the appliance use,
limitations and associated hazards. Operating instructions and
warnings must be read and understood by all operators and
users.

Except as noted, this piece of equipment is made in the USA
and has American sizes on hardware. All metric conversions
are approximate and can vary in size.

The following trouble shooting, component views and parts lists
are included for general reference, and are intended for use by
qualified service personnel.

This manual should be considered a permanent part of this
appliance. The manual must remain with the appliance if it is
sold or moved to another location.

AGENCY LISTING INFORMATION

This dispenser is and

This dispenser meets

listed under UL file E9253

Standard 4 only when installed,

CAUTION: Equipment
Electrical Damage

DO NOT plug in or energize this
appliance until all Installation
Instructions are read and followed.
Damage to the warmer may occur
if these instructions are not
followed.

CAUTION:
Burn Hazard

Exposed surfaces of the
appliance may be HOT to the
touch and can cause burns.

operated and maintained in accordance with the enclosed
instructions.

595 p/n 75982 OpM Heated Dispenser

3