Wells BMW-206RT Specifications
WELLS
W E L L S M A N U F A C T U R I N G
I T E M N O .
BMW-206RT BUILT-IN BOTTOM MOUNT
“ROUND CORNER” FOOD WARMER
BMW-206RT
BMW-206RT BUILT-IN BOTTOM MOUNT “ROUND CORNER” FOOD WARMER
Wells BMW-206RT Built-in Food Warmer is designed for bottom mount installation and
provides an unobstructed, clean countertop. Warming pan has round corners, is fully insulated
and will accommodate a 12” x 20” inset pan up to six inches deep.
Specifications
Overall Dimensions: Inches MM
Width 13 7/8 352
Depth 21 15/16 557
Temperature Settings: OFF/LO to HI
Weights: Lbs. KG
Installed 18 8
Shipping 22 10
Accessories / Options
Adapter Top, to convert warmer to hold two
7-quart insets, 21502
Adapter Top, to convert warmer to hold
two 4-quart insets and two 2 1/2-quart insets,
21503
Adapter Top, to convert warmer to hold three
4-quart insets, 21616
Adapter Top, to convert warmer to hold four
2 1/2-quart insets, 21623
Adapter Top, to convert warmer to hold one
4-quart and one 7-quart inset, 21618
Inset, 2 1/2-quart capacity with lid, 20773
Features
• Round corner (R), deep drawn, stainless
steel warming pan makes this warmer very
durable and easy to clean.
he positive-off thermostat (T) controls
• T
the element, allowing for adjustable and
more consistent temperatures. A signal
light indicates that the heating element
is energized.
• The tubular element, located under the
warming pan, allows for quick heating.
• Fully insulated for greater heat efficiency.
• Models available with optional ” drain (D).
• Designed for wet or dry operation.
• The BMW-206RT Warmer is Underwriters
Laboratories, Inc. Recognized and meets NSF
International standards.
• A one-year warranty against defects covers
parts and labor.
Inset, 4-quart capacity with lid, 20774
Inset, 7-quart capacity with lid, 20587
Individual Drain (D) is available on all models
R A I S I N G T H E S T A N D A R D
(160)
6 5/16
(557)
21 15/16
(512)
20 5/32
(309)
12 5/32
(211)
8 5/16
(352)
13 7/8
BMW-206RTD ONLY
1/2 IN DRAIN NPT
W E L L S M A N U F A C T U R I N G
WELLS
R
STD.4
R
M O D E L
B M W - 2 0 6 R T B U I LT - I N B O T T O M M O U N T
“ R O U N D C O R N E R ” F O O D WA R M E R
D I M E N S I O N S :
INCH
(MM)
SUGGESTED CLEARANCE FROM UNIT
TO THE NEAREST SURFACE
BACK SIDE BOTTOM FRONT*
1 1 6 3/4 4 1/8
(25) (25) (171) (105)
* When control box is located below the unit,
front clearance can be 2 inches.
NOTE: Depending on the installation,
clearances can be reduced upon further
evaluations to UL standards.
B M W - 2 0 6 R T E L E C T R I C A L S P E C I F I C AT I O N S :
MODELS VOLTS WATTS AMPS P HASE POWER SUPPLY CORD
BMW-206RT 120 1200 10.0 SINGLE NONE
BMW-206RT 208 1240 6.0 SINGLE NONE
BMW-206RT 240 1650 6.9 SINGLE NONE
ALL MODELS WITH A ‘D’ SUFFIX HAVE THE SAME ELECTRICAL SPECIFICATIONS AS THE STANDARD MODELS.
NOTE: Specifications are subject to change without notice. See installation instructions prior to installing the unit.
This document is not for installation purposes. The installation of recognized component units requires additional
evaluations to Underwriters Laboratories, Inc. standards.
THIS UNIT IS DESIGNED TO BE INSTALLED IN METAL COUNTERS ONLY.
WELLS MAN UFACTUR IN G COMPANY
2 ERIK CI RC LE, P O BOX 28 0, VERD I, NV 8 9439 U.S .A. • USA PHO NE : (775) 689-5700 • FAX : (775) 689-5972
FOR O RDERS ONLY: ( 888 ) 356-536 2 • FAX: ( 800) 356 -514 2 • www. wells blo omfie ld. com
2001 WELL S MAN UFA CT URI NG • P RIN TE D IN TH E U .S .A . • 2/ 01 • RE V( D) • PA RT NO. 46 03 4
Loading...