Wells 5124CZ Parts List

Star
Manufacturing
International Inc.

10 Sunnen Drive
St. Louis, MO 63143

Installation

and
Operating
Instructions

Phone: [phone]
Fax: [phone]

2M-Z6392 Rev. A 3/6/03

ELECTRIC COUNTER CHAR-BROILER

MODELS

8H-5124CZ and 8H-5136CZ

Model 5124CZ

1

SPECIFICATIONS

8H-5124CZ

Type: Infinite Control, 2 Controls, 6.6 KW, 396 sq. in. (2555 sq. cm) Grid Area
Weight: Installed - 98 lb. (45 kg); Shipping - 145 lb. (66 kg)
Dimensions: 24" W x 25 5/8" D x 14 1/4" H

(61cm W x 65cm D x 36cm H)

Volts: 240V, 3 PH Amps: x - 18.8 y - 18.8 z - 11.9

240V, 1 PH Amps: 27.5
208V, 3 PH Amps: x - 21.8 y - 21.8 z - 13.8
208V, 1 PH Amps: 31.8

8H-5136CZ

Type: Infinite Control, 3 Controls, 9.9 KW, 594 sq. in (3832 sq. cm) Grid Area
Weight: Installed - 175 lb (80 kg); Shipping - 215 lb. (98 kg)
Dimensions: 36" W x 25 5/8" D x 14 1/4"H

(91 cm W x 65 cm D x 36 cm H)

Volts: 240V, 3 PH Amps: x - 23.9 y - 23.9 z - 23.9

240V, 1 PH Amps: 41.3
208V, 3 PH Amps: x - 27.6 y - 27.6 z - 27.6
208V, 1 PH Amps: 47.6

2

SAFETY SYMBOL

This symbol is intended to alert the user to the presence of important
operating and maintenance instructions in the manual accompanying
the appliance.

RETAIN THIS MANUAL FOR FUTURE REFERENCE

NOTICE

Using any part other than genuine Star factory supplied parts relieves
the manufacturer of all liability.

NOTICE

Star reserves the right to change specifications and product design
without notice. Such revisions do not entitle the buyer to corre­sponding changes, improvements, additions or replacements for
previously purchased equipment.

MAINTENANCE AND REPAIRS

Contact your local authorized service agent for service or required maintenance. Refer to the authorized service
center listing provided with the unit. The Star Service Help Desk (1-800-807-9054) is available during normal
business hours to answer any questions that may arise. Please have your model number and serial number for
faster service.

3

GENERAL INSTALLATION INSTRUCTIONS

CAUTION

CAUTION

This equipment is designed and sold for commercial
use only by personnel trained and experienced in its
operation and is not sold for consumer use in and
around the home nor for use directly by the general
public in food service locations.

These Electric Char-broilers are equipped for the
voltage and wattage indicated on the nameplate
mounted on the inside immediately in back of the
water drawer front. These units are designed to
operate on alternating current (A.C.) only. DO NOT

CONNECT TO DIRECT CURRENT (D.C.).

INSTALLATION

The installation of this appliance should conform to the
national electric code and local electric codes and
ordinances and the local electric company rules and
regulations.

CARE MUST BE TAKEN WHEN OPENING PAN
TO PREVENT SPILLING.

5. The charbroiler is constructed of high quality,
modular grates that are also readily removable for
cleaning, and are designed to have a dedicated
heating element which is controlled by a heat
control switch.

6. Seasoning - Set the heat control switch to low
position and preheat for about 15 to 20 minutes.
Using a cloth, spread a thin film of cooking oil over
the entire broiling grill surface. Allow the film to
remain on broiling grill for about 5 minutes. Wipe
surface clean and apply another film of cooking oil.
Wipe surface clean again. The broiling grill is now
ready for use. The oil may tend to smoke - this is
normal.

7. Approximate grilling temperatures range from
(with no product on grill) 350° F on low setting to
570° F on high.

For your protection, we recommend that a qualified
electrician install this appliance. The electrician should
be familiar with electrical installations and your local
electrical requirements. The external wiring should
be in conduit or an approved type of flexible cable
suitable for operation at 90° C and of suitable size to
carry the load. The supply circuit should be properly
fused and equipped with a means of disconnecting as
required by local electrical code. The body of the
appliance should be grounded (Do not ground to a
gas supply pipe).

1. Locate the unit: Do not install the unit closer than
12 inches from a side wall and/or closer than 9
inches from a rear wall.

2. Level the char-broiler by adjusting the feet, which
have provision for 1 inch of adjustment. This
adjustment also allows a perfect alignment to be
achieved with other Star-Max™ units.

3. The terminal block can be accessed by removing
cover plate from back of broiler.

4. Fill water pan on broiler prior to use. Water
should be flush with splash baffles. Make sure
water is present in pan at all times. Note: Pan is
easily removable for cleaning.

CLEANING

1. Clean with a clean soft cloth daily. Any discoloration
can be removed with a non-abrasive cleaner.

2. Remove water pan, and modular cooking grates;
wash in sink.

3. To clean heating element, first remove modular
grate corresponding to element. Swing element
to vertical position and lock in place with the
support located in center of element housing.
Clean elements with stiff wire brush or equivalent.

4. Heat baffles are located directly below heating
elements and are removable for cleaning in sink.

RETAIN THIS MANUAL FOR FUTURE REFERENCE
PART NO. 2M-Z6392 Rev. A 3/6/03

4

6

7

8

PARTS LIST EFFECTIVE

3/6/03 Rev. A

MODELS

8H-5124CZ and 8H-5136CZ Electric Counter Char-Broilers

Number

Key

Number

1 2R-Z3436 2/3 KNOB-INFINITE CONTROL 5124CZ/5136CZ
2 H1-Z6330 1 FRONT PANEL 5124CZ

3 H1-524031 1 DRAWER 5124CZ
4 H1-Z3606 2/3 BRACKET-INFINITE CONTROL 5124CZ/5136CZ

5 H1-524008 1 LOWER BAFFLE ASSY 5124CZ
6 H1-524007 1 UPPER BAFFLE ASSY 5124CZ

7 H1-524016 1 ELEMENT SUPPORT ASSY 5124CZ
8 2N-Y3083 2/3 ELEMENT-HEATING - 240V, BENT 5124CZ/5136CZ
9 2N-Y3085 2/3 ELEMENT-HEATING - 240V, STRAIGHT 5124CZ/5136CZ

10 2C-2560 12/18 NUT 10-24, HEX 5124CZ/5136CZ
11 2C-9704 12/18 SCREW 10-24X1 5124CZ/5136CZ
12 2F-Y3107 4/6 GRATE 5124CZ/5136CZ
13 2I-7370 2 GASKET
14 H1-8746 2 SUPPORT-ELEMENT HOUSING
15 H1-155244 1 ELEMENT HOUSING COVER ASSY 5124CZ

16 2A-5401 1 COTTER PIN
17 2C-1811 1 WASHER
18 2P-7969 1 SPRING
19 H1-524017 1 ELEMENT PIVOT BRACKET ASSY 5124CZ

20 H1-155247 1 ELEMENT HOUSING SUPPORT ASSY
21 H1-Y3115 2 STRAP - ELEMENT 5124CZ

22 2A-Z3610 6/9 SPACER, INSTALLED AT FRONT ROW ONLY 5124CZ/5136CZ
23 H1-Y3265 1 BRACKET - TERMINAL BLOCK
24 H1-Z3554 1 COVER BACK 5124CZ

25 2E-Y2849 1 BLOCK - TERMINAL
26 2C-Y2344 1 TERMINAL - GROUNDING
27 2A-Z0314 4 FOOT 4" DIE CAST
28 2J-Z3157 2/ 3 INDICATOR LIGHT 5124CZ/5136CZ
29 2J-6403 2/3 CONTROL-INFINITE 5124CZ/5136CZ
30 2M-Z6364 1 SIGN 24" CHAR BROILER 5124CZ

Part

Number

H1-Z6331 1 FRONT PANEL 5136CZ
H1-536028 1 DRAWER 5136CZ

H1-536009 2 LOWER BAFFLE ASSY 5136CZ
H1-536007 1 SHORT UPPER BAFFLE ASSY 5136CZ

H1-536008 1 LONG UPPER BAFFLE ASSY 5136CZ
H1-157007 1 ELEMENT SUPPORT ASSY 5136CZ
2N-Y3084 2/3 ELEMENT-HEATING - 208V, BENT 5124CZ/5136CZ
2N-Y3086 2/3 ELEMENT-HEATING - 208V, STRAIGHT 5124CZ/5136CZ

H1-157001 1 ELEMENT HOUSING COVER ASSY 5136CZ

H1-536015 1 ELEMENT PIVOT BRACKET ASSY 5136CZ

H1-Y3266 2 STRAP - ELEMENT 5136CZ

H1-Z3562 1 COVER BACK 5136CZ

2M-Z6365 1 SIGN 36" CHAR BROILER 5136CZ

Per

Unit

Description and Model Designation

IMPORTANT: WHEN ORDERING, SPECIFY VOLTAGE OR TYPE GAS DESIRED PAGE

INCLUDE MODEL AND SERIAL NUMBER OF

Some items are included for illustrative purposes only and in certain instances may not be available.

Star Manufacturing International, Inc.

9

1
1