Weller - Apex Tool Group SOLDERING STATIONS Catalog Page

WSP150

(Order No. 0052917099)

HEAVY DUTY SOLDERING PENCIL

(Order no. 0053313599)

This heavy duty 150W / 24V soldering pencil is used for jobs with extremely high
heat requirements and large heat sinks. When operating with dual power units
WD2 or WD2M, the second port is disabled. Use with PH60 support.
Comes with LHTF tip.

Available tips

Cat. No. Order No. Style A B

LHTD 0054445299 Chisel 0.185¨ (4.7 mm) 0.71¨ (1.5 mm)
LHTE 0054445199 Chisel 0.263¨ (6.7 mm) 0.71¨ (1.5 mm)
LHTF 0054445099 Chisel 0.366¨ (9.3 mm) 0.71¨ (1.5 mm)

WHP80

PREHEATING PLATE

(Order no. 0052702899)

This 80W / 24V preheater is used with any 80W power unit. It is used to slowly
increase the temperature of a PC board prior to rework to minimize the risk
of damaging sensitive components. Heating surface is 80 mm x 50 mm. The
temperature range is adjustable from 150°F to 850°F.

SOLDERING

STATIONS

WSB80

SOLDER BATH

(Order no. 0052704099)

The 80W / 24V solder bath is used with any 80W power unit. The solder bath
is used as a rework preparation tool to tin wire ends and to clean and tin
component leads. It can also be used to clean extraneous solder particles in
preparation for rework. Temperature range is adjustable from 150°F to 850°F.
Compatible with lead free solders.

WSB150

SOLDER BATH

(Order no. 0052704299)

The WSB150 solder bath is ideally suited to tin coating and preparation
of soldering components. The heat output is 150W / 24V and the adjustable
temperature range is 150°F – 999°F. When operating with dual power units
WD2 or WD2M, the second port is disabled.

FE75

FUME EXTRACTION SOLDERING PENCIL

(Order no. 0052916699)

80W / 24V soldering pencil with integral fume extraction assembly. Compatible
with any 80 watt power unit and WFE2P self-contained fume extraction system.
Temperature is adjustable from 150°F to 850°F. Includes a 5 mm cylinder brush
for cleaning and a funnel for support when not in use.
Uses LT series tips and comes with LTB tip.

www.cooperhandtools.com/weller

15