Weller - Apex Tool Group SOLDERING STATIONS Asseccories Catalog

SOLDERING
STATIONS

ACCESSORIES

MIX AND MATCH TO BUILD YOUR OWN CUSTOM SOLUTION

See page 13 to determine accessory and power unit compatibility

WSP80

80 WATT SOLDERING PENCIL

A micro soldering pencil, 80 W/24V. This soldering pencil can be universally
used in all situations from extremely delicate soldering to those where there
is a greater temperature requirement. Use with WDH10 support
(Order no. 0051512199). Comes with LTB tip.

WP80

80 WATT SOLDERING PENCIL WITH SHORT GRIP

(Order no. 0052918099)

A micro soldering pencil, 80W / 24V. Similar in use and performance to the
WSP80. Comes with a short barrel grip so you can get close to the work.
Optional longer grip (order no. 0058744846) is available.
Use with WDH10 support (order no. 0051512199). Comes with LTB tip.

WMP

MICRO SOLDERING PENCIL

The 65W / 24V pencil is up to the task with superior performance for both
heat-up and thermal efficiency. Suitable to handle all micro components
and fine pitch tasks. The WMP provides an extremely short tip-to-grip distance.
The heater is integrated into the handle. When the tip wears out, the heating
element lives on. Use with WDH20 support (order no. 0051512299). Comes with NT1 tip.

WMRP

MICRO SOLDERING PENCIL

(Order no. 0052917199)

The WMRP soldering pencil has an extremely short heat-up time. All component
parts of the system, such as the sensor and heating element, are designed for
optimum heat transfer. This ensures absolute efficiency in the utilization of the
power provided by the power unit. Changing soldering tips is quick, easy, and
requires no tools. Use with WMRH support (order no. 0051514599). Comes with RT3 tip.

WMRT

MICRO DESOLDERING TWEEZERS

(Order no. 0051317299)

The new WMRT desoldering tweezers enables precise desoldering of very small SMD
components down to 0201. The high-speed regulation of the WD1M and WD2M
power units drive the tweezers. Use with WMRTH support (Order no. 0051514699).
For WMRT tweezers and WMRTH support in a set, order no. 0051317399.
Comes with RTW2 tip set.

14

WTA50

THERMAL TWEEZERS

(Order no. 0051317199 )

This 50W / 24V tool is used to desolder SMD components. The tweezer
has two movable heating elements so that tip alignment can be adjusted.
Use with AK51 support (Order no. 0051504299). For WTA50 tweezers
and AK51 support in a set, order no. 0053313399.
Comes with WTA1 tip sets.