Page 1
Sleep Dot
User Manual for Sleep Dot
Page 2
01 Description
LED Indicator
Sleep Dot
Battery
Magnetic Cover
02 Installation Guide
Open the back cover of your Sleepace Dot and insert the battery
03 User Manual
● Power On
Tap the Sleep Dot twice on the right side; the LED turns to green and starts blinking
● Connect your Sleep Dot to the Internet
Open the Sleepace App. You will be asked to register an account for your Sleep Dot; set the
automatic detection time
● Placement of the Sleep Dot
Slide the magnetic cover off the back and place your Dot on the corner of your pillowcase
Fabric should be < 2mm
● Check your sleep report
Tap your Sleep Dot twice on the right side; the LED turns green and begins syncing data.
Open the Sleepace App to check your daily, weekly, monthly or quarterly sleep report.
Please note: The Sleep Dot can locally store data of the current week; please sync your sleep
data at least once a week
Page 3
04 LED Indicator
Start Up LED turns to green and flashes every 3s
Bluetooth successfully connected LED turns to green for 6s
Low Battery LED turns to red and flashes every 1s
Please replace the battery in time
* The Sleep Dot and Sleepace App will both warn you when the battery capacity is lower than
10% and you should replace the battery
Loading...