Weldex WDRV-5063M, WDRV-7041M, WDRV-7043M, WDRV-7063M, WDRV-5043M User Manual
...
WDRV-5063M/7063M
Owner's Record
The model and serial numbers are located at the rear.
Record the serial number in the space provided below.
Refer to these numbers whenever you call your dealer regarding this product.
MODEL:
WDL-7001M WDRV-7041M WDRV-7043M WDRV-7061M WDRV-7063M
Serial Number:
WDL-5001M WDRV-5041M WDRV-5043M WDRV-5061M WDRV-5063M
Warnings
To reduce the risk of electric shock do not remove cover (or back).
NO user serviceable parts inside. Refer servicing to qualified service personnel.
The lightning flash with arrowhead symbol within an equilateral triangle is
intended to alert the user to the presence of "dangerous voltage" within a
product's enclosure that may be of sufficient magnitude to constitute a risk
of electric shock.
The exclamation point within an equilateral triangle is intended to alert the
user to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the appliance.
2. Owner's Record / Warnings
Table of Contents
WDRV-5063M/7063M
1. Table of Contents
2. Features/Precautions
3. Packing List / Installation
4. Functions
Monitor
Remote Control
5. System Wiring
WDRV-5043M/7043M
WDRV-5063M/7063M
WDL-5001M/7001M
WDRV-5041M/7041M
WDRV-5061M/7061M
6. Operation
3
4
7
8
9
10
10
11
11
11
12
7. Troubleshooting
11. Specifications / Dimensions
14
16
Table of Contents. 3
WDRV-5063M/7063M
Features
●
WDRV-5063M/7063M is specifically designed as an automotive vision system.
- High Resolution 5" / 7" TFT LCD Panel
- Free Input Voltage (DC 12V~DC 32V
- NTSC/PAL Compatibility
- 3 Camera Inputs
- Automatic Picture Display (3 Triggering Functions
- Auto Scanning Function
- Dimmer Fuction
- Built-in Speaker
- OSD (On Screen Display
)
- Weatherproof (IP54)
- Easy Release Bracket
)
)
Precautions
●
Warning
To prevent fire or shock hazard, do not expose the set to rain or moisture. Do not rub or
strike the Active Matrix LCD with anything hard for this may scratch, mar, or damage the
Active Matrix LCD permanently.
●
Regulatory Information
This equipment has been tested and is in compliance with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
residential installation. This equipment generates uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may
cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try or correct the interference by one or
more of the following measures.
4. Features / Precautions
WDRV-5063M/7063M
●
Do not remove the cover
To reduce the risk of electric shock and maintain the quality of the product,
please do not remove the cover.
Please follow the instructions of the wiring diagram in the Installation Guide.
●
Keep small articles out of the reach of children
Store small articles (screws, etc.) in places not accessible to children.
If swallowed, consult physician immediately.
●
Stop using immediately if a problem appears
When problems appear, stop using the system immediately and contact the
dealer from whom you purchased the equipment. Some problems which may
warrant immediate attention include a lack of sound, noxious smoke being
emitted from the unit, or foreign objects dropped inside the unit.
●
Do not use this equipment outside the vehicle
Do not use this equipment for purposes other than those listed for the vehicle.
Failure to do so may result in an electric shock or an injury.
●
Stop the vehicle before carrying out any operation that could interfere with
your driving
If the operation of the unit (such as turning on or turning off the monitor, etc.)
interferes with your driving, stop the vehicle in a safe location before attempting
operation.
●
Temperature
Before turning your unit on, be sure the temperature inside the vehicle is
between -10℃ and +50℃.
●
Maintenance
If you have problems, do not attempt to repair the unit by yourself. Return it to
your purchasing dealer.
Precautions. 5
Loading...