Weldex WDL-1900PVM-IP Specsheet
WDL-1900PVM-IP
19” IP Public View Monitor
• 19” 5:4 (1280 x 1024) LCD Panel
Built-in WDR full HD camera (1920 x 1080 FHD)
•
Multiple video inputs - 3 CVBS (BNC), D-SUB, HDMI, DVI-D
•
Analog video output - 3 x CVBS loopout (BNC)
•
3D comb
•
•
Supported
•
Fully Integrated with Verint, March Networks, & 3VR.
•
Changeable logo clip / video clip (SD memory)
ONVIF S/version 2.2
IP Public View Monitors
19
5
4
Specification
Display
Camera
Screen size
Resolution 1280 x 1024
Brightness 250 cd/m
Contrast ratio 1000 : 1
Response time 5ms (max 8ms)
Viewing angle 170(H) / 160(V)
Aspect ratio 5:4
Image sensor
Lens
Active pixel 1920 (H) x 1080 (V)
Frame rate 30 fps
Backlight compensation
19"
2
1/2.8" SONY 2.38M progressive C-MOS
2.9mm fixed lens
WDR [HDR]
Specification
Camera
Video output
(CVBS)
Video input
Power
Environmental
Dimensions
Media Player
Compression
Streaming
Resolution
Frame rate
Interface
ONVIF
Protocols pixel
Users
Security
Firmware
Dual booting
Factory reset
Operation system
CVBS monitor output
Camera loopout
CVBS
Analog RGB (PC VGA)
DVI
HDMI
Power input
Power consumption
Power output
Operating temperature
Humidity
Outline dimension (mm)
Weight
File format
H.264 @HP, MJPEG
Simultaneous multiple streams H.264 streaming over
UDP,TCP,HTTP or HTTPS MJPEG streaming over HTTP or HTTPS
1920x1080
up to 30fps @1080p
10/100 Mbps Ethernet, RJ-45
PROFILE S / version 2.2 support
IPv4, TCP/IP, HTTP, HTTPS, UPnP, BONJOUR RTP/RTSP,
SMTP, FTP, DHCP, NTP, DNS, DDNS, SNMP
8 clients monitoring at the same time
Multi-level user access with password protection
IP address
HTTPS encrypted data transmission
Supports upgrade
Support for recovery
Restores to factory default settings
Embedded linux
CVBS (BNC)
CVBS (BNC)
NTSC/PAL multi (BNC 75Ohm)
D-SUB15P connector
DVI-D connector
HDMI connector
DC12V/5A
T.B.D
12V/0.5A (for external camera)
0˚ C ~ +50˚ C
10 ~ 90% RH, non condensing
-
-
-
Dimension
MOTION SENSOR
DC+12V
Loading...