Weldex WDL-1900PVM, WDL-1900PVM-HD User Manual

WDL-1900PVM / WDL-1900PVM-HD

Table of Contents

1. Table of Contents

2. Precautions

3. Warnings

4. Function

A. Front side of monitor
B. Back side of monitor
C. Explanation on remote control

5. System Wiring

6. Operation

A. Picture
B. Source
C. OSD
D. Setup
E. Screen

2

3

4

6
7
8
9

10
10
11
11
11

F. Terms
G. Check before asking warranty service

8. Packing List

9. Specifications

10. 19” PVM 600 Line Camera

11. 19” HD Camera

Before operating the set, please read this manual carefully

2. Table of Contents

12
13
14
15
16
17

WDL-1900PVM / WDL-1900PVM-HD

Precautions

Do not remove the cover.

To reduce the risk of electric shock and maintain the quality of the product,
please do not remove the cover.
Please follow the instructions of the wiring diagram in the Installation Guide.

Keep small articles out of the reach of children.

Store small articles (screws, etc.) in places not accessible to children.
If swallowed, consult physician immediately.

Stop using immediately if a problem appears.

When problems appear, stop using the system immediately and contact the
dealer from whom you purchased the equipment. Some problems which may
warrant immediate attention include a lack of sound, noxious smoke being
emitted from the unit, or foreign objects dropped inside the unit.

Do not use this equipment outside the vehicle.

Do not use this equipment for purposes other than those listed for the vehicle.
Failure to do so may result in an electric shock or an injury.

Stop the vehicle before carrying out any operation that could interfere
with your driving.

If the operation of the unit(such as turning on or turning off the monitor, etc.)
interferes with your driving, stop the vehicle in a safe location before
attempting operation.

Temperature

Before turning your unit on, be sure the temperature inside the vehicle is
between -15(+5) and +60(+140

Maintenance

If you have problems, do not attempt to repair the unit by yourself. Return it to
your purchasing dealer.

)

Precautions. 3

WDL-1900PVM / WDL-1900PVM-HD

Warnings

WARNING

RISK OF ELECTRIC SHOCK

DO NOT OPEN

To reduce the risk of electric shock do not remove cover(or back).
No user serviceable parts inside. Refer servicing to qualified service personnel.

The lightning flash with arrowhead symbol, within an equilateral triangle, is
intended to alert the user to the presence of "dangerous voltage" within a
product's enclosure that may be of sufficient magnitude to constitute a risk
of electric shock.

The exclamation point within an equilateral triangle is intended to alert the
user to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the appliance.

WARNING

To prevent fire of shock hazard, do not expose the set to rain or moisture. Do not rub or
strike the Active Matrix LCD with anything hard, as this may scratch, mar, or damage the
Active Matrix LCD permanently.

REGULATORY INFORMATION

This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may
cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try or correct the interference by one or
more of the following measures.

4. Warnings

WDL-1900PVM / WDL-1900PVM-HD

CAUTION

Do not attempt to modify this product in any way without written authorization.
Unauthorized modification could void the user's authority to operate this product.

POWER

This set operates on DC power. The voltage is as indicated on the label on the back
cover. Never apply AC power to the set directly. Do not allow anything to rest upon or
roll over the power cord, and do not place the set where the power cord is subject to
damage.

SERVICE

Never remove the back cover of the monitor, as this can expose you to high voltage and
other hazards. If the monitor does not operate properly, unplug it and call your dealer.

LOCATION

Position your monitor where no bright light or sunlight will shine directly on the screen.
Also ensure that the monitor is placed in a position that allows a free flow of air. Do not
cover the ventilation openings on the back cover.

CLEANING

Unplug the monitor before cleaning the face of the LCD Screen. Dust the monitor by
wiping the screen and cabinet with a soft, clean cloth. If the screen requires additional
cleaning, use a clean, damp cloth. Do not use liquid or aerosol cleaners.

Warnings. 5

WDL-1900PVM / WDL-1900PVM-HD

Function

A. Front side of monitor.

It is an explanation of the name and function per each part.

WDL-1900PVM

WDL-1900PVM-HD

1. LCD PANEL
It supports a resolution 1280x1024

2. REMOTE CONTROL SENSOR
IR-SENSOR is built in so that you can use remote control.

3. MENU
Display a main menu on screen.

4. DOWN
Press to use select items in the on-screen menu.

5. DECREASE/INCREASE CHANNEL OR VOLUME

6. SOURCE
TURN DOWN A CHANGE OF SCREEN
Change a mode to VIDEO1 / PC / HDMI (HDMI - option)

7. POWER BUTTON
Turn ON/OFF power of monitor.

8. LED
Illuminates brightly when the monitor is switched on. (Power standby indicator)

6. Function