Weldex WDL-1040MFM User Manual

WDL-1040MFM

Table of Contents

1. Table of Contents

2. Precautions

3. Warnings

4. Function

5. Operation

A. Picture
B. PC
C. OSD
D. Setup
E. Terms
F. Check before asking warranty service

6. Components

7. Specifications

2

3

4
6
7
7
7
8
8

9
10
11
11

Before operating the set, please read this manual carefully

2. Table of Contents

WDL-1040MFM

Precautions

Do not remove the cover.

To reduce the risk of electric shock and maintain the quality of the product,
please do not remove the cover.
Please follow the instructions of the wiring diagram in the Installation Guide.

Keep small articles out of the reach of children.

Store small articles (screws, etc.) in places not accessible to children.
If swallowed, consult physician immediately.

Stop using immediately if a problem appears.

When problems appear, stop using the system immediately and contact the
dealer from whom you purchased the equipment. Some problems which may
warrant immediate attention include a lack of sound, noxious smoke being
emitted from the unit, or foreign objects dropped inside the unit.

Do not use this equipment outside the vehicle.

Do not use this equipment for purposes other than those listed for the vehicle.
Failure to do so may result in an electric shock or an injury.

Stop the vehicle before carrying out any operation that could interfere
with your driving.

If the operation of the unit(such as turning on or turning off the monitor, etc.)
interferes with your driving, stop the vehicle in a safe location before
attempting operation.

Temperature

Before turning your unit on, be sure the temperature inside the vehicle is
between -15 (+5 ) and +60 (+140

Maintenance

If you have problems, do not attempt to repair the unit by yourself. Return it to
your purchasing dealer.

)

Precautions. 3

WDL-1040MFM

Warnings

WARNING

RISK OF ELECTRIC SHOCK

DO NOT OPEN

To reduce the risk of electric shock do not remove cover(or back).
No user serviceable parts inside. Refer servicing to qualified service personnel.

The lightning flash with arrowhead symbol, within an equilateral triangle, is
intended to alert the user to the presence of "dangerous voltage" within a
product's enclosure that may be of sufficient magnitude to constitute a risk
of electric shock.

The exclamation point within an equilateral triangle is intended to alert the
user to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the appliance.

WARNING

To prevent fire of shock hazard, do not expose the set to rain or moisture. Do not rub or
strike the Active Matrix LCD with anything hard, as this may scratch, mar, or damage the
Active Matrix LCD permanently.

REGULATORY INFORMATION

This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may
cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try or correct the interference by one or
more of the following measures.

4. Warnings