Welch Allyn Medical Diagnostic Equipment 6000 User Manual

9. Check the Host Controller firmware version.

Mat. 717460, 80016850 Ver. A

READ THIS FIRST!

The Braun PRO 4000 Dock works only with firmware version 1.50.00 or later on Connex Vital Signs Monitor 6000 Series monitors. Older firmware on these monitors must be upgraded before the dock can be installed.

If your monitor part number is in the following list, you do not need to upgrade the monitor firmware. Install the dock using the instructions on the installation sheet that accompanies the dock or mounting kit.

If your monitor part number is not in the list, you must check the firmware version and then, if

• If the version is not 1.50.00 or later: You must upgrade to the latest version.

a. Upgrade the firmware by using the Welch Allyn Service Tool. For instructions,

refer to the service-tool installation guide or the Help file in the service tool (Help > Service Tool Help).

indicated, upgrade the firmware before installing the dock. This document shows how to check the firmware version on the monitor or through the Welch Allyn Service Tool. Choose the option that you prefer.

Part numbers of compatible monitors:

b. Install the dock using the instructions on the installation sheet that accompanies

the dock or mounting kit.

• If the version is 1.50.00 or later: The monitor is compatible with the dock. Install the dock using the instructions on the installation sheet that accompanies the dock or mounting kit.

For more information about dock functionality, refer to the version of Welch Allyn Connex Vital Signs Monitor 6000 Series Directions for Use that applies to your firmware version. You can download the directions for use from http://www.welchallyn.com.

Welch Allyn Technical Support

USA +1 800 535 6663

Australia +61 2 9638 3000 Malaysia +603 7875 3341

Canada +1 800 561 8797 Netherlands +31 202 061 360

China +86 21 6327 9631 Singapore +65 6419 8100

European Call Center +353 46 90 67790 South Africa +27 11 777 7555

France +33 155 69 58 49 Spain +34 917 499 357

Germany +49 695 098 5132 Sweden +46 85 853 6551

Italy +39 026 968 2425 United Kingdom +44 207 365 6780

+1 315 685 4560

Japan

Latin America

+81 42 703 6084 +1 305 669 9003

63XXXE 64XXXE 65XXXE 63MXXE 64MXXE 65MXXE 63NXXE 64NXXE 65NXXE 63XTXE 64XTXE 65XTXE 63XTPE 64XTPE 65XTPE 63MTXE 64MTXE 65MTXE 63NTXE 64NTXE 65NTXE 63MTPE 64MTPE 65MTPE 63NTPE 64NTPE 65NTPE 63XXPE 64XXPE 65XXPE 63NXPE 64NXPE 65NXPE 63MXPE 64MXPE 65MXPE

64HXXX 65HXXX 64HXPX 65HXPX 64HTXX 65HTXX 64HTPX 65HTPX 64HXXE 65HXXE 64HXPE 65HXPE

Welch Allyn, Inc. 4341 State Street Road Skaneateles Falls, NY 13153-0220 USA www.welchallyn.com

Note

Option 1—Check the firmware version on the monitor

1. If the monitor is not already on, power it on.

2. Touch the Settings tab.

3. Touch the Advanced tab.

4. In the right pane, check the number under Software version.

Option 2—Use the Welch Allyn Service Tool to check the firmware version

Required equipment

• Computer with Internet access and the service tool installed

• Monitor

• USB 2.0/5-pin Mini-B cable, gold, 6 feet

To check the firmware version

1. If the monitor is not already on, power it on.

2. Connect the USB cable to the Mini-B port on the monitor and to the computer.

3. On the computer, start the service tool by double-clicking the Welch Allyn Service Tool icon.

4. If the Welch Allyn screen appears, click Service.

5. If prompted, log on with your user ID and password. (Alternatively, you can log on with ADMIN as the user ID and leave the password field blank.)

The Device list page appears.

6. Confirm that the monitor name appears with a green square next to it.

• If the version is not 1.50.00 or later: You must upgrade to the latest version.

a. Upgrade the firmware by using the Welch Allyn Service Tool. For instructions,

refer to the service-tool installation guide or the Help file in the service tool (Help > Service Tool Help).

To acquire the service tool, contact Welch Allyn Technical Support or download it from http://www.welchallyn.com/promotions/services/ servicetool.htm.

b. Install the dock using the instructions on the installation sheet that accompanies

the dock or mounting kit.

• If the version is 1.50.00 or later: The monitor is compatible with the dock. Install the dock using the instructions on the installation sheet that accompanies the dock or mounting kit.

If the square is gray or the monitor name does not appear, cycle device power. If this does not solve the problem, contact Welch Allyn Technical Support.

7. Click the row to highlight it.

8. Click Select.

The Device information tab appears.